Buy Now!
New Sway Bar Link from 1AAuto.com 1aau.to/ib/1ASS...
This video shows you how to install new TRQ sway bar links on your 2003-2007 Honda Accord. Sway bar links connect the sway bar (stabilizer bar) to other suspension components. They have a movable joint that can be damaged or wear out over time. When that happens, the joints get loose, and rattle.
This process should be similar on the following vehicles:
2003 Honda Accord
2004 Honda Accord
2005 Honda Accord
2006 Honda Accord
2007 Honda Accord
Tools you will need:
• 15mm Wrench 1aau.to/oZC/1AX...
• 17mm Wrench 1aau.to/oZC/1AX...
• 14mm Socket 1aau.to/obEi/1A...
• 17mm Socket 1aau.to/obEi/1A...
• 19mm Socket 1aau.to/oana/1A...
• Locking Pliers 1aau.to/omu/1AX...
• 1/2 Inch Impact Gun 1aau.to/ouZ/1AX...
• Swivel
• Torque Wrench 1aau.to/oaMd/1A...
• Gloves 1aau.to/oanr/1A...
• Safety Glasses 1aau.to/oaff/1A...
• 3/16 Allen Wrench 1aau.to/oZ/1AXA...
• Floor Jack 1aau.to/oabt/1A...
• Hammer 1aau.to/oWR/1AX...
• Jack Stands 1aau.to/oYu/1AX...
Subscribe: / @trq
Check out our playlist:
Honda Accord 2003-2007 7th Gen: • Honda Accord 2003-2007...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.