How to Replace Alternator 2003-2007 Nissan Murano

Рет қаралды 89,497

2 жыл бұрын

Buy Now!
New Alternator from 1AAuto.com 1aau.to/ia/1AEAL00591
The alternator in your vehicle powers the battery and electrical system while the engine is running. If your alternator is failing, you may wind up with a constantly draining battery. This video shows you how to install a new alternator engineered specifically for your 2003-2007 Nissan Murano.
This process should be similar on the following vehicles:
2003 Nissan Murano
2004 Nissan Murano
2005 Nissan Murano
2006 Nissan Murano
2007 Nissan Murano
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oa/1AXAA00013
• Phillips Head Screwdriver 1aau.to/oa/1AXAA00013
• Pry Bar 1aau.to/oa/1AXAA00020
• 10mm Socket 1aau.to/oc/1AXAA00017
• 13mm Socket 1aau.to/oc/1AXAA00015
• 14mm Socket 1aau.to/oc/1AXAA00015
• 21mm Socket 1aau.to/oa/1AXAA00043
• Hose Clamp Pliers 1aau.to/oa/1AXAA00076
• Needle nose pliers 1aau.to/oa/1AXAA00051
• Needle nose pliers 1aau.to/oa/1AXAA00052
• Ratchet 1aau.to/oc/1AXAA00016
• Socket Driver
• Torque Wrench 1aau.to/oe/1AXAA00044
• Bucket
• Funnel 1aau.to/oa/1AXAA00310
Subscribe: / @trq
Check out our playlist:
Nissan Murano 2003-2007 1st Generation: • Nissan Murano 2003-200...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Пікірлер: 46

@TRQ 2 жыл бұрын

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*

@chefboiarb864 4 ай бұрын

Great video really gave me some good tips on the basics of changing my alternator, but to anybody doing this on a 2007 murano yuu do not have to disconnect or drain any tubes or liquids or take out the radiator, take off your passenger side front tire, remove the serpentine belt like he shows in the video as well as the circle thing that moves the belt😂 remove your ac compressor and yuu will be able to reach it almost perfectly, may be a pain but much more easy

@bobmarley7859 2 ай бұрын

Makers of this car deserve sleepless nights😂

@20irishman 2 жыл бұрын

As a Nissan tech, I never had to disconnect the coolant system. I just lower the a/c compressor and lower the front subframe a bit. That's how I do it

@GiorgosC-rp5ms 2 жыл бұрын

exactly right

@dougevans9975 2 жыл бұрын

Are there any videos the way you do it?

@plasmasquid Жыл бұрын

Not a full step by step, but the best I could find atm kzfaq.info/get/bejne/rpuAfZaitcWwaX0.html

@ganeshnarayan5505 Жыл бұрын

Dude if you are a Nissan tech what are you doing watching this video. Just saying

@adrianeatmon3425 Жыл бұрын

@@ganeshnarayan5505 the man literally gave a different opinion from a tech perspective...plus last time I checked KZfaq is free to the public 🤷🏾‍♂️ I'm just saying

@LifeInElSalvador 2 жыл бұрын

In my opinion this is the best video on removing an Alt. Very detailed, very well explained and very good focus on the most important areas.

@joesamtos238 Жыл бұрын

I just wanted to thank you for your help I couldn't been able to replace my 07 Nissan Murano's alternator without your help so thank you so much I appreciate it 🙏

@bubbatennessee7531 2 ай бұрын

Thank you so much. Among all the videos I have watched on the Murano alternator replacement, your method of removing the radiator out of the way is the way to go. It is a lot easier to remove the radiator than to tray to remove the alternator with the radiator in place. Draining radiator is nothing. By the time alternator goes out, the radiator and fan are probably also due for replacement anyway, might as well to take this opportunity to put in a new radiator.

@chrisd350 2 жыл бұрын

Leave it to nissan to do asinine stuff like burying an alternator..

@sarajaques4680 Жыл бұрын

Right!! My next car will be a Chevy lol much easier to work on

@cowsongs Жыл бұрын

I am so with you here. I actually own one of these Muranos, but it's agony to work on. I miss old-school conventional stright-mounted V8 engines, LOL. I changed things like this in my 1970s Olds V8 in about 30 minutes. Loosen belt, 3 bolts, unplug connector, and it's out. Taking apart half the engine compartment just to get an alternator out is absurd.

@randygoff9420 Жыл бұрын

Best video and showed all the important sections to complete the job right the first time.. "Great Job"

@ronmelliad7327 10 ай бұрын

A1 Auto Always Have the Best R&R Videos!

@tonytofa2128 11 ай бұрын

Thank you. Excellent video. Might be the long way but it's the best example ive found for us DIYers. Blessings

@formaldyahyde6141 Жыл бұрын

beautiful ! smart ! excellent ! BRAVO & THANK YOU for a grade A PERFECT VIDEO for Nissan Murano do-it-yourselfer's

@khalidabdelaziz829 2 жыл бұрын

I did this yesterday and it was fairly easy. This is the best video around for this task.

@vekthor5892 Жыл бұрын

Thanks a lot of your video. Its a very good learning for murano owners. Very detailed and relaxing too. God Bless and more power to you..

@mrdoitall1936 Жыл бұрын

Wow that was freaking beautiful

@Blueberrybones 2 жыл бұрын

Did not mention 12mm and Jack stands in list of tools as I do not have a lift at home. Other than that wasn't bad video but my buddy refused to take the tire off. Its 12am rn. We started at 8pm

@armanminasyan7009 Жыл бұрын

Thank you very much respect from Armenia city Artashat

@charlgrobler4967 10 ай бұрын

Excellent video. Thank you.

@amandacarney2674 2 жыл бұрын

You didn’t include in the list a 12mm but I made it work. Other than that very great video

@ricardomora7816 Жыл бұрын

Excellent video. Thanks

@merlinpalma4219 Жыл бұрын

Great video.. I have to do it on my 04 murano. Just need a place to do it since I live in an apartment complex they don't let residents to work on cars 😫

@leo9153 Жыл бұрын

Can I use a Nissan maxima 2005 alternator if I redo the wiring harness? Looks exactly the same and in the same location I already purchased it and had it tested

@mikeekim242 Жыл бұрын

Does the belt tensioner pully bolt "lock in" the tensioner bolt?

@lucascady4992 Жыл бұрын

Did mine without removing the radiator, had to remove the fan assembly and AC compressor..

@jerrysmith5763 9 ай бұрын

Cool job , video

@your_stupid1012 6 ай бұрын

Thank you for help

@jaybird7953 8 ай бұрын

The tension pulley bolt won’t losten when I use my 3/4 wrench, what should I do

@elizabethflowers1668 9 ай бұрын

How long did this take you? I’m having to do this on someone’s car and I’m trying to figure out how many hours this will take me.

@ChrisMcGuire0 Жыл бұрын

can this be done without a lift? no one wants to help me work on mine because they want it to be on a lift and i dont have access to one

@wtfmanicanthaveaname Жыл бұрын

Ok so you have a TON OF SPACE IN THERE. I just did mine and had no room. Can’t reach the long bolt from the back needed universal joints to reach the nuts. There is no giant ac compressor in your way. My ac compressor was in the way every step of the way. It BARELY was able to come out and i had to twist it around. Still trying to figure out how to get the new one in as i cant get my hand into where the long bolt goes. This car sucks.

@aridiscesarguerramustelier2356 10 ай бұрын

Thenk you.

@adianhenry1625 8 ай бұрын

A customer call me to change is alternate on it 010 Nissan minerno told him I can't I take a look it was out of my reach just don't wantto spend the time to do that on a Sunday at is home 😢

@chozen0018 Жыл бұрын

How much did you charge for this? In labor? 400$

@StevenChant Ай бұрын

I’m doing this at home & my idler pulley nut rounded off. Now the top holes don’t wanna line up. Terrible design

@richardbaumeister466 Жыл бұрын

I smell a rat here. We have the ac pump disconnected all but the lines and still can't get the darn thing out. It's getting cold outside so we will hit it with fresh eyes in the morning and we will see