How to Replace Water Pump 2011-2019 Ford Fiesta

No video

How to Replace Water Pump 2011-2019 Ford Fiesta

Рет қаралды 94,378

Күн бұрын

Buy Now!
New Engine Water Pump from 1AAuto.com 1aau.to/ib/1AEW...
This video shows you how to install a water pump in your 2011-2019 Ford Fiesta. The water pump keeps coolant flowing through your engine. Common failures of the water pump will leave the coolant leaking, or stagnant. Both will lead to overheating if left untreated. Install a new engineered to fit water pump from TRQ for total peace of mind.
This process should be similar on the following vehicles:
2011 Ford Fiesta
2012 Ford Fiesta
2013 Ford Fiesta
2014 Ford Fiesta
2015 Ford Fiesta
2016 Ford Fiesta
2017 Ford Fiesta
2018 Ford Fiesta
2019 Ford Fiesta
Tools you will need:
• Pry Bar 1aau.to/oa/1AXA...
• 10mm Wrench 1aau.to/oa/1AXA...
• 13mm Socket 1aau.to/oa/1AXA...
• 15mm Socket 1aau.to/oa/1AXA...
• 8mm Socket 1aau.to/oa/1AXA...
• Trim Tool Set 1aau.to/oa/1AXX...
• Bent Nose Pliers
• Hose Clamp Pliers 1aau.to/oa/1AXA...
• E8 Inverted Torx Socket
• T27 Torx Driver
• Ratchet 1aau.to/oa/1AXA...
• Socket Extensions 1aau.to/oa/1AXA...
• Torque Wrench 1aau.to/oa/1AXA...
• Drill Bit Set 1aau.to/oa/1AXA...
• Block of Wood
• Cloth Rags 1aau.to/oa/1AXS...
• Hose Clamp
• Wire Ties
• Gear Marking Compound
• Drain Pan 1aau.to/oa/1AXA...
• Floor Jack 1aau.to/oa/1AXA...
• Funnel 1aau.to/oa/1AXA...
• Pick 1aau.to/oa/1AXA...
• Turkey Baster
• Utility Knife 1aau.to/oa/1AXA...
Subscribe: / @trq
Check out our playlist:
Ford Fiesta 2011-2019 6th Generation: • Ford Fiesta 2011-2019 ...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Пікірлер: 42

@TRQ 2 жыл бұрын

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

@caspermarks9300 2 жыл бұрын

Thanks I just changed my pump n if u take the head light out u get so much more room to work with way easier

@willf5360 2 жыл бұрын

Had to change my mom's water pump this weekend. Best video I have seen related to the water pump change. Thanks a lot. I work in the elevator industry so I'm no stranger to mechanical problems.

@chris333reeves Жыл бұрын

Thanks! I'm definitely not doing this after all. Holy crap man

@paulsmithson6866 Жыл бұрын

Every other vid shows cambelt timing shenanigans for this engine. I was hoping it would be possible to clamp the cambelt in some way in order to squeeze the water pump through from behind the belt. Many thanks for showing me it is possible!

@timbolton274 8 ай бұрын

Thank you for these detailed instructions. I followed them straight through and it worked out perfectly for me. I had a bit of trouble trying to figure out how to get that pin inserted in the timing belt tensioner pulley. I know to use a breaker bar to release the tension on my full-size truck's serpentine tensioner, so I searched around for several other youtube videos to find out how to release the tension. It didn't occur to me that I could pinch the two tabs together with my bare hands! When I figured out that part, the rest was a breeze. Thanks again.

@johnstewart2115 20 күн бұрын

Using this video as reference for our 2013 Eacape. Definitely a lot more room to work around the Fiesta! Great video👍

@sierrahines1804 Жыл бұрын

Thank you. Based on this video, I see I was not overcharged by my mechanic. I will never, buy a ford again though lol.

@robertfindlay2325 Жыл бұрын

Remind me not to buy a 2011-2019 Ford fiesta. Too damned complicated to change a simple part such as a water pump! Ford design just is not what it used to be.

@joemason9187 16 күн бұрын

Thankyou I was going to get this done in the shop but 450 english kopeks but it doesn't look beyond my capabilities nice vid

@zoomcinema9650 Жыл бұрын

All this work just for replacing water pump 😕

@yutao1982 2 жыл бұрын

Great video! Thank you for sharing. I found "Lisle Stretch Belt Remover / Installer" is a life saver.

@andrewdewar8159 Жыл бұрын

Is it cause the cam belt tensioner goes through the water pump you need to do all that ?

@jokosuwito79 10 ай бұрын

Thank you very much..this is the most efficient way to replave ford fiesta water pump..thank you for sharing guys!!

@gamenrage5998 Жыл бұрын

You know what is funny most small shops will not even do this job yet i can do in my garage on the floor, so we have here in Sturgis Michigan a lot of lazy want-a-be who will not do much.

@kchappie6672 2 жыл бұрын

Great video didnt know about the engine mount or timing tensioner so thank you! should be a fun weekend lol

@michaelabraham3677 Жыл бұрын

Good vid. How to tell if the water pump is bad?

@andrewdewar8159 Жыл бұрын

Is it the same on a UK Fiesta ? I love your careful and well presented video. I love that you show the whole process from beginning to end, no cutting to something having been completed. I really like this video.

@listotrucking 4 ай бұрын

Not much working room but it’s a lot simpler then I thought for this car

@jokosuwito79 10 ай бұрын

This is the best instruction ever!!

@blade82188 2 жыл бұрын

You skipped a lot of important steps and potential problems, but it was very useful

@xjinit Жыл бұрын

Like what?

@dsar6099 Жыл бұрын

Wth ford? Im selling my fiesta! I dont get why ford has not ever learned from toyota!!!!!!

@djerome2 Ай бұрын

Did you have to drain the coolant from the radiator before taking off the old water pump?

@andrewdewar8159 Жыл бұрын

Great video, made it look easy but I bet it is not. Well lit.

@konrill2 2 жыл бұрын

Great video, great explanation to all parts plus torque values. Much appreciated and attempting pump change next week. Thanks again

@sohipnation 2 жыл бұрын

How did change go?

@spike7703 Жыл бұрын

perfect video instruction. thanks

@user-ox2lc6qi1j Жыл бұрын

Am i missing something? Why does the pump not just come out independent of the timing belt? Does it not just run on the pulley belt?

@FastEddieQ Жыл бұрын

Excellent video, good work… much appreciated!

@javiernoyola2669 Жыл бұрын

I have a question. Can I replace just the water pump pulley or do I have to do everything like water pump and timing set?

@sarutobi191 Жыл бұрын

The procedure should be the same/similar for a 2013 Ford Fusion with the same 1.6 engine, correct? My main concern is the timing belt, since I dont have locking tools for the cams

@user-dg1zp1xh6r 2 ай бұрын

Whos had a problem with the timing after doing this?

@chadlyntaylor7831 5 ай бұрын

How do i know if ive got a bad water pump? I hear a noise coming from that area but cant be sure ??

@Jamalthethrd Жыл бұрын

Can it be done without taking serpentine off?

@gelatnous_cube6118 2 жыл бұрын

Do you have a list of tools you need for this?

@gamenrage5998 10 ай бұрын

Could anyone give me an opinion on my car i had it towed to a ford place, and they are saying the water pump broke but to fix it they have to first do a compression test on the engine because he says the pump may have damaged the engine and want 700 dollars just to do that test first is this a known issue with the car?