Truck Tailgate Latch Repair

Рет қаралды 19,887

7 жыл бұрын

amzn.to/2kKbxSr Dodge right and left side latch
amzn.to/2kK225W Dodge Tailgate lock and Handle
amzn.to/2kKcvhv Bestop TrekStep Truck Step Dodge
amzn.to/2li5RRL Truck Step by AMP Research
amzn.to/2kKgjiK Dodge Tailgate Assist
In, this video I show you have to save a few bucks and fix your broken tailgate on your own. You may be able to add a spring to the outside or fix the broken spring on the inside. My symptom was that my tailgate would not shut or lock. Thanks for watching.
Help support Doublewide6 by sponsoring his Patreon account
/ doublewide6
Doublewide6 has a Master’s Degree in industrial technology with a specialization in Manufacturing, due to factors beyond the control of Doublewide6 and anyone featured in his videos, I cannot guarantee against improper use or unauthorized modifications of this information. Doublewide6 assumes no liability for property damage or injury incurred as a result of any of the information contained in this video or any of Doublewide6’s videos. Use this information at your own risk. Doublewide6 recommends safe practices when working on equipment, power tools, chemicals, electronics, electrical systems, vehicles, and or with tools seen or implied in this video. Due to factors beyond the control of Doublewide6, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Doublewide6.

Пікірлер: 36

@zoolanderfred 7 жыл бұрын

Nice job. These are the kind of fixes I like to do. Some of your fixes are pretty complicated for me, you're a talented guy. Thanks for doing your channel, I really appreciate it.

@doublewide6 7 жыл бұрын

Thanks for the compliment it is great to have dedicated subscribers. Thanks Bob

@JoshKilen 7 жыл бұрын

nice job, do you have a video or links on the lights that are underneath?

@tonym6920 7 жыл бұрын

Is there anything you can't fix? LOL. Great job, you're an inspiration to us all!

@doublewide6 7 жыл бұрын

Yes, there are plenty of things that I can't fix. You never know unless you try. One thing about me is I don't stop trying, most times I find solutions, but sometimes I can' t figure it out. Thanks for watching. Bob

@ynotsun31 5 жыл бұрын

Great video! Where did you buy the new elbow? How did you get it in the latch?

@raymondcampbell2346 7 жыл бұрын

Good job on the repair DW6. Put your mind to anything and you can repair it. And save you some money.

@doublewide6 7 жыл бұрын

I wish that were true. I have tried to fix many things that I was not successful with. I just spent an hour trying to fix my wife's steam mop, and now I have a bunch of hoses, hose clamps, and a 20" cord. Those parts will come in handy, but I'm still wondering why that thing did not work? Thanks for commenting good to hear from you. Bob

@icytucannoli886 Жыл бұрын

Thanks for the video

@skipwilliam5639 5 жыл бұрын

That latch thing worked great with the hole drilled thank you for saving me $124.00 Canadian funds lol

@Lanninglongarmmowing 7 жыл бұрын

Very cool stuff. I guess you could have just replaced the spring too. They probably don't sell just the spring though.

@doublewide6 7 жыл бұрын

Actually, the spring is not for sale. However, if I broke mine I would have put on a new spring. However, the springs are welded in place with heavy (3/8") rivits. If the spring breaks, you will need to grind off the rivet and reweld it back on with a new spring. So the bottom line, it could be done. Thanks for commenting. How is the chainsaw mill working out? I could use some planks.

@DonnaMSchmid 7 жыл бұрын

Great job! (Oh, and I LOVE that step you showed at the end! I've used friends' and family members' pickups, and getting in and out of the back is not easy for an old fat lady like me! That step would be perfect!!!)

@doublewide6 7 жыл бұрын

The step is a little expensive, but if you use your truck a lot it is a worthwhile investment. Thanks Bob

@terrylarotonda784 7 жыл бұрын

Good on as usual Bob. I'm going to look into the truck step. That looks real neat. Did your truck come with the hydraulic assist or did you put it on. Take care

@doublewide6 7 жыл бұрын

I put the hydraulic assist on a little while back, I like it especially when I am carrying something. Also it is safer with the kids playing around in the bed of the truck. The step is really nice, it is pricey, but these new trucks are too high to be jumping up and down all day long. It makes a world of difference and it simply bolts onto existing bumper bolts.

@ozzstars_cars 7 жыл бұрын

Nice fix on the latch. Did you buy that license plate cover at Getaway Car Depot? I need one of those in the worst way haha

@doublewide6 7 жыл бұрын

You could call that license plate cover custom made.

@douglaslaramie9245 7 жыл бұрын

One of those deals, you can't just order the spring, because the catch probably doesn't come apart. The way of the world. Throw away a $70 catch because a $1 spring broke. That fix would cost you close to $100 I bet at a dealer, counting labour. That $70 stays in your pocket at least for now. Nice fix. KIT d

@doublewide6 7 жыл бұрын

Yeah, I think it will hold up because I put the spring through the hole, so it is not over-streched from what I can tell.

@brianl6964 7 жыл бұрын

A tip for next time. Probably don't go in that access port often so while in there might make sense to lube and treat all pivots and linkages.

@doublewide6 7 жыл бұрын

I did, I just did not film it. Thanks for taking the time to comment. Bob

@MissouriOldTimer 7 жыл бұрын

that hole idea looks better than just having it hooked over that latch arm.. looks more positive.

@doublewide6 7 жыл бұрын

I guess there is a little flat relief where the spring sits on the bottom of the metal piece. If I did not have the hole the spring would not reach. Hopefully it does not break. Thanks again for taking the time to comment, you are a regular and I appreciate it. Thanks Bob

@MissouriOldTimer 7 жыл бұрын

thank you, I enjoy seeing videos of someone working on or fixing things, I have a few videos along these lines too , I don't put many up , if you get a chance , give one a look at...

@doublewide6 7 жыл бұрын

You have a lot of cool fix it videos. I did one of those john deer transaxles as well. You picked up a new subscriber. I am going to scan through your videos. Thanks for the tip. Bob

@MissouriOldTimer 7 жыл бұрын

to be honest, I saw your video , it helped me a bunch with the one I worked on. I had never tackled one of those before.

@coollasice4175 7 жыл бұрын

Good repair. If you want to cover up your license plate number, you might want to go back and blur it out in the video.

@doublewide6 7 жыл бұрын

I'm still trying to figure out why I'm covering my license plate, but thanks. Bob

@aleblanc3547 7 жыл бұрын

It's always frustrating when they advertise how great their vehicles are, then rip the heck out of you when it comes time to keep it running. Nice $100 save, Bob.

@doublewide6 7 жыл бұрын

This one worked out well. Hopefully it holds up for a while. Time will tell. I'm planning on keeping the truck for another 10 years.

@mike97525 7 жыл бұрын

dodge parts are high priced, good job fixing that latch

@doublewide6 7 жыл бұрын

Thanks, luckily I have not had to buy too many of them. Many parts are available after market, that is how I did my rear bumper replacement and the step rails. Sensors, I always go OEM. Thanks for commenting. Bob

@terrylarotonda784 7 жыл бұрын

Guess I shoulda d down a little farther on your links. That anew my question, duh.

@Pdpawlak 7 жыл бұрын

Amazon is a dangerous dangerous site. Go on there for one 7 dollar part and end up with 150 bucks in your cart. Those "suggested items" know me well

@doublewide6 7 жыл бұрын

The good thing about amazon is that they have everything. That's why I always go there. If you can't find it on Amazon try ebay. If it is not on either of those websites, Good Luck. Take Care. Bob