Trumpeter

Рет қаралды 27,083

Жыл бұрын

A big kit, a good kit, a long video... Took me more to edit than to build... This is the full Trumpeter Ju-87A Stuka built. Let me know what you think by leaving a comment below.

Пікірлер: 61

@josephstabile9154 10 ай бұрын

Thanks for showing your beautiful build of this kit! A couple of technical errors to note: 1. The Ju-87A did not employ those partiicular bomb/fuel tank racks; they are specific to the D model only. The A model wings were not "plumbed" for fuel lines for drop tanks, and the Jumo 210 of the A model did not have sufficient power to carry center-line bomb AND wing tanks/bombs. 2. A model only carried one 7.92 mm mg 17 wing gun. Typical Trumpeter lack of attention to historical technical detail by including D model-specific parts in an A model kit, and not, at the least, warning in the instructions the modeler.

@wbpsmodels3452 10 ай бұрын

Thank you for the information.. truth be told, I'm not a history buff and I had no idea of the facts that you mentioned.. So I simply followed the instructions and tried to make a realistic model. You are greatly knowledgeable in the subject. Thank you for watching.

@Scissorsguy Жыл бұрын

Congratulations on building a giant your award is a subscriber even though you have tons I’m still subscribing

@wbpsmodels3452 Жыл бұрын

Thank you :)

@Scissorsguy Жыл бұрын

@@wbpsmodels3452 your welcome;)

@Sea-cadet2838 7 күн бұрын

@wbpsmodels3452, it's been a year you all good mate

@Jeff-cv4qn 6 ай бұрын

Well saved on that cross decal at around 42.59! Beautiful work and just the right amount of chipping IMO.

@markc7002 2 ай бұрын

Exceptional job with the tones and weathering!!

@oranje1964 Жыл бұрын

Beautiful kit with lots more detail than the Airfix version i built a while back. I do believe a great kit like this deserves an aftermarket instrument panel and seatbelt upgrade. Your build looks amazing. Thanks for the video.

@wbpsmodels3452 Жыл бұрын

Thank you very much :)

@arthurrytis6010 Жыл бұрын

@oranje1964. Hope someone like Quinta or Red Fox brings out a 3D decal set for this.

@neilhaas Жыл бұрын

The Junkers 87A Stuka known as the screaming dive bomber aircraft for its screaming.

@paulhaynes1314 6 ай бұрын

Great video, awesome build, getting tips before starting mine, however I haven’t an airbrush kit, only ever used brush but never done one this big, I’m thinking of moving over to airbrush so this video has helped a lot, would like also a 1/24 Spit but from comments so far all over I’d prefer new tooling version Again nicely done sir 💪🏻 Happy new year

@stephenlovelock5563 Жыл бұрын

Really enjoyed your video,great to see 1/24 scale represented,lovely build, well done mate.

@wbpsmodels3452 Жыл бұрын

Thank you very much!

@johnlong7178 Жыл бұрын

A true work of art! Nice job

@wbpsmodels3452 Жыл бұрын

Thank you!

@scottledbetter7212 Жыл бұрын

Wow. This kit is massive ! Outstanding job on it !👍

@wbpsmodels3452 Жыл бұрын

Thanks a lot!

@scottledbetter7212 Жыл бұрын

@@wbpsmodels3452 You are welcome !

@monsieurchevrebois9811 Жыл бұрын

It looks closer to 1:18 as the Airfix 1:24 is considerably smaller.

@davidharrington1133 Жыл бұрын

Looks like a very cool kit. I have a 1/24th Spitfire and Hellcat in my queue but this one is definitely one to add. I always loved the Stuka

@wbpsmodels3452 Жыл бұрын

I have the 24 Spit in stash too... Haven't been able to find the Hellcat yet, although I must admit that it intimidates me a bit... Perhaps when I get more experienced I'll buy it..

@joshbeasant6858 Жыл бұрын

Very enjoyable video thank you❤❤

@wbpsmodels3452 Жыл бұрын

Thank you too

@thomasjewell6951 3 ай бұрын

AN AMAZING KIT! HOWEVER THEY COULD HAVE HAD A REMOVABLE COWL PANELS TO DISPLAY THE POWERPLANT AND SLIDING CANOPYS.

@daffo001 Жыл бұрын

Outstanding!

@wbpsmodels3452 Жыл бұрын

Thank you!

@steve1315 Жыл бұрын

Good work sir,looks a better kit than the very old Airfix kit be nice if they updated it.

@wbpsmodels3452 Жыл бұрын

I seen to remember having tried that Airfix Kit back in the far 70's.. but I can hardly remember anything, not even sure if I had finished it... (after 1977 I stopped for nearly 40 years) - Bu't I'm sure that "vintage" kits aren't as detailed or well machined as nowadays kits. Thanks for waching

@goforitpainting Жыл бұрын

Cool 👍

@grahamleach9440 Жыл бұрын

Brilliant work! Am doing the airfix one at the moment and it’s a dog in places.

@wbpsmodels3452 Жыл бұрын

Thanks!! Good luck with yours... Is it the old one (circa 1976)?

@grahamleach9440 Жыл бұрын

@@wbpsmodels3452 Yes, the 1/24 one. It’s nearly ready for paint now,just filling the gaps lol.

@memememe2674 Жыл бұрын

Airfix and the word DOG in same sentence, no way I!

@grahamleach9440 Жыл бұрын

Not the new ones! The new tool ones they are bringing out are brilliant. Have you seen the new 1/24 spit? It’s superb. Honing my skills to start mine.

@goldenscales 8 ай бұрын

Absolutely amazing aircraft! I built a 1-24 scale Ju.87 back when I was 19 or so. That was back in the day when they would provide a small battery-powered motor to spin the propeller blades! Sadly, I can't remember the name of the company that made it.

@wbpsmodels3452 8 ай бұрын

Thank you very much. There are still some "Technik" models which supply a motor (i think even Revell has some) but they are very expensive nowadays

@davidharrington1133 Жыл бұрын

Using the tablet foil for paint is genius, will definitely be stealing that idea.

@wbpsmodels3452 Жыл бұрын

I sincerely wish you didn't have to take any tablets.. but by all means, feel free to steal it ! :)

@SirSavesALot1977 11 ай бұрын

Outstanding build! Well done! Do you use a respirator when gluing and painting?

@wbpsmodels3452 11 ай бұрын

Thank you! No, I don't use a respirator... but I only use water-based acrylics, no enamels

@barrywhitfield930 11 ай бұрын

Lovely build! It's a shame there's no open engine panels though

@zaptekarskaprecyzja Жыл бұрын

OMG, this plane is huge! Do you have hangar to expose it? :)

@filipetabr9987 11 ай бұрын

hello everything is fine? I hope so, I'm Brazilian and I really want to start plastic modeling, I have a reserve of money destined for this, however, when I think about the painting part, in addition to not having the ability, I don't have money for adequate equipment, would you be able to help me? Thanks

@rafaeldelpozo1902 8 ай бұрын

Me encantaría q hicieras este modelo de avión Revell-Messerschmitt Bf110 C-2/C-7, 1:32

@wbpsmodels3452 8 ай бұрын

I have it in my stash... stay tuned.. won't be very soon however.

@rafaeldelpozo1902 8 ай бұрын

@@wbpsmodels3452 perfect!!!! Thx!!

@rodrigotalero754 Жыл бұрын

Fantastic work it's a pitty not to find a way to show up the engine details

@wbpsmodels3452 Жыл бұрын

Indeed... I couldn't risk destroying the cover... and I didn't want to have a "naked" stuka.. (I did that in my 1:48 build). Thanks for watching!

@androot69 7 ай бұрын

At this scale you can give the pilot a pack of cigs and a map and you didn't even made a single cable. Shame on you sir. For a modeller who makes such beautiful seat belts that should be a cake walk.

@neilhaas Жыл бұрын

Thats a plane aircraft of the Luftwaffe, Adolf Hitler & Goring.

@josephstabile9154 11 ай бұрын

Yes, it is.

@mohammedalmukhtar5428 8 ай бұрын

What was the problem with the right wing white cross decal?

@wbpsmodels3452 8 ай бұрын

I used my scalpel to cut the "inside" parts of the decal carrier (so that it wouldn't show) and the four cross sections were misaligned when applied... I had to align them as four separate decals.

@ejuist 5 ай бұрын

Ich wollte bei meinem neu zugelassenen Auto das Kennzeichen JU 87 haben, ging nicht ! Auch JU 88 und JU 90 waren angeblich vergeben !!

@ianday5583 5 ай бұрын

A great kit, but the tailplane endplates are wrong and the undercarriage trousers are way too big. Also, the complete centra canopy opens. More research before you build methinks! 2/10 for this video.

@adamw2442 Ай бұрын

Who cares

@ianday5583 27 күн бұрын

You should.!Oh and the spinner is the wrong shape for the Anton.