Ottawa, Ontario - In this episode, we walk through installing the Dynojet Power Commander 6 hardware for Harley-Davidson Touring bikes and trikes. It's a simple installation that involves removing the seat, installing the Power Commander 6, and testing the Power Commander connection.
We'll also show you the Dyno Tuning results. First, we ran a series of baseline passes and then began modifying the fuel curve. We found several lean areas at the low end, which we corrected. At the top end, we had to pull out some fuel to correct the rich areas in the fuel curve.
Ultimately, we increased this Harley-Davidson's performance from 101 lb-ft to 116 lb-ft and from 79 HP to 92 HP.
** You can find instructions for downloading and installing the software can be found at www.dynojet.com/blog/how-to-i...
internationaldynoauthority.com