Tuning the RIFLESPEED Gas Control

Рет қаралды 32,199

Жыл бұрын

JOIN THE FIGHT: donate.gunowners.org/ga01/
SIGN UP FOR THE ARGOS EMAIL LIST: bit.ly/42Txa8T
In this video, Chad demonstrates how easy it is to tune the ‪@riflespeed‬ Gas Control featured on our ‪@ArgosOrdnance‬ R/Series A115 rifles. Be sure to follow us on Twitter and sign up for our email list above to stay up to date!
AMAZON STORE: amzn.to/2H7Lq6Y
PATREON: / iv8888
GUITARSENAL: / guitarsenal
IV8888 ON THE WEB: www.iraqveteran8888.com
SHIRTS & ACCESSORIES: ballisticink.com/iv8888/
FACEBOOK: / iraqveteran8888
INSTAGRAM: @iraqveteran8888_offical
TWITTER: @iraqveteran8888 @argosordnance
AMAZON NOTICE: As an Amazon Associate, Iraqveteran8888 earns from qualifying purchases.
DISCLAIMER: Our videos are strictly for documentary, educational, and entertainment purposes only. All shooting is performed on state-approved firing ranges under the supervision of trained professionals. Imitation or the use of any acts depicted in these videos is solely AT YOUR OWN RISK. All work on firearms should be carried out by a licensed individual, and all state and federal rules apply to such. We (including KZfaq) will not be held liable for any injury to yourself or damage to your firearms resulting from attempting anything shown in any of our videos. We do not endorse any specific product, and this video is not an attempt to sell you a good or service. Iraqveteran8888 is not a gun store and DOES NOT sell or deal in firearms. Such a practice is heavily regulated and subject to applicable laws. Iraqveteran8888 DOES NOT sell parts, magazines, or firearms. We are not instructing our viewers on how to modify firearms, accessories, or otherwise to change their basic legal function. These videos are free to watch, and if anyone attempts to charge for this video, notify us immediately. By viewing or flagging this video, you are acknowledging the above.
Fair Use: In the rare instance we include someone else’s footage, it is covered in Fair Use for Documentary and Educational purposes to drive commentary and allow freedom of speech.
Copyright 2023, 88 Industries, LLC

Пікірлер: 109

@BlueAlphaBelts Жыл бұрын

We bought a Argos Ordnance SPR and our first impressions are that it's a fantastically built rifle! We were super impressed by the attention to detail throughout the build!

@seanridner1385 Жыл бұрын

Excellent components choices, guys. Really impressed with what we can see thus far on these!

@DaveL9170 Жыл бұрын

Make them ambidextrous!!!!

@Pilot4prophet661 Жыл бұрын

I have two of these systems. One on a PSA 16" 5.56 and the other on a PSA 20" 6.5 Grendal. Griffin gate-lok muzzle devices for Griffin 30-SD can. Like that quick, no guess gas adjustment.

@Rocksteady713 11 ай бұрын

How does this work with long handguards? I have a 15 inch handguard

@Pilot4prophet661 11 ай бұрын

@@Rocksteady713 Meant to say gas system length and handguard length.

@hairydogstail 9 ай бұрын

15 is a bit too long..Stick to 13 inch..@@Rocksteady713

@silver4drrx828 Жыл бұрын

Ive been wanting a Riflespeed gas block for my 6mm ARC. And glad you mentioned yall can hard pin it as well. Now just need a price to do the package deal of purchasing the riflespeed and hardpin at the same time! Insert meme of FRY from Futurama saying "Shut up and take my money"🤣

@bobbyc2768 Жыл бұрын

chad is such a chad. and i love that you guys tune them to run full power 5.56. i can't stand the people who say "if it don't run steel it doesn't deserve brass" that is such a stupid thing to say - if a rifle runs the lowest powered 223 ammo, when you run full pressure 5.56 it's going to be stupidly overgassed. great to see builders going the right direction on that. and i like how this adjustable gas block has such a wide range of settings, and each click up or down is such a small increment so that you can really fine tune it. i've previously steered away from adjustable gas blocks because you find that one moment it's undergassed and the tiniest adjustment makes it overgassed. these small increments are nice letting you really dial it in perfectly. that thing is awesome

@martinvangilsjr.4135 Жыл бұрын

The Riflespeed Gas Control is amazing. Best in the industry... 🤗🥰🤙🪖🙏🇺🇲

@SantosGunworks Жыл бұрын

I've used adjustable gas blocks in the past including the Riflespeed one. The one thing I recommend is to set up the gas block with the rifle at a 45 degree as if you had a red dot at a 45 degree. I had set up my gas block with the rifle perfectly upright and it was perfect until I did some drills with the offset red dot and it would not hold open on the last round. I had to open up the gas block a few more clicks and it worked perfect and I didn't notice any recoil differences.

@albanfisher6857 3 ай бұрын

what does your red dot have to do with gas blocks? wtf is this comment

@PatternRecognizer 2 ай бұрын

@@albanfisher6857 lol agreed, doesn't make sense at all

@sethrockwood 2 күн бұрын

He’s saying if the rifle is canted at 45 degrees when shooting, as in shooting from odd positions, or when using an offset red dot, it changes the way the rifle reacts and it needs more gas. That’s also why for “duty” use, you go up another setting….much higher likelihood of firing in odd shooting positions in real world over punching paper at the range.

@ArmyMatt79 7 ай бұрын

I love my Rifle Speed AGB!!!😃

@JeffKnoxAZ Жыл бұрын

Excellent cammo job on the tank in the background!

@jeffbetts4254 Жыл бұрын

That is what I like, Full Power. Fast and heavy rounds.

@tommycho9068 Жыл бұрын

Great video. Thanks.

@brando104 Жыл бұрын

You kno as someone that got chance to meet you guys and getting opportunity to truly understand what you guys are about/ beliefs. I have no interest in owning an AR. Ak all the way. But because its one you are building Chad. I will end up getting one as my one and only AR

@Allen338LM Жыл бұрын

Cant wait to see how these gas systems work and upper in general on a meltdown

@ArgosOrdnance Жыл бұрын

Coming soon 😇

@Fister_of_Muppets Жыл бұрын

Love the idea of the Riflespeed AGB. Don't like the price. That said, I'm buying one to try out. If I do that, the retail price of my "modern Mk12" will come to $3300. Luckily my fiancè has no idea just how much I spend on gun stuff lol.

@godsdozer 7 ай бұрын

if you are worried about her finding out, let me save you some time, find another. :)

@Fister_of_Muppets 7 ай бұрын

@@godsdozer it was a joke lol

@jasonlord5141 Жыл бұрын

That's a sick gas system.

@hairydogstail 10 ай бұрын

I love the Rifle Speed adj gas block, it makes all the others obsolete.The one concern I have is the controls are a little too easy to turn, so I added a second adjustment spring to the first and it was perfect..

@Scooter_cash 10 ай бұрын

Where does the excess gas go?

@hairydogstail 10 ай бұрын

It restricts the gas, not expel it..@@Scooter_cash

@bfonfield1534 Жыл бұрын

Component choice is top notch

@voltairee3012 Жыл бұрын

I was very interested with this gb when it came out. Since then I stopped running an adjustable gb. I'm running a bcm upper, criterion/bcm headspaced bcg, cmt rail. With a v5a2/springco green.

@successvibrations380 Жыл бұрын

Nice!

@berniestraight126 Жыл бұрын

Awsome

@gamecock4205 Жыл бұрын

Hell yeah..

@charlesrichardson2372 Жыл бұрын

Imma save up this summer and get one 🤙🫡

@user-ye4zz8nt8g Жыл бұрын

استمر ❤❤

@eric_brooks Жыл бұрын

Nice

@djupchurch2673 6 ай бұрын

Will it work with the super 42 with h3 buffer

@allenx7124 6 ай бұрын

Why does Chad looks like a College TA with the hat and Glasses 😂😂

@scottwilson1258 6 ай бұрын

Chad, do You Dig the Keymo mount?

@bryanduchane2371 Жыл бұрын

Chad, are you doing anything to the barrel & bolt interface to increase accuracy of these rifles? I vaguely remember a video you did about accuratizing the bolt/barrell lock up and bedding to increase the accuracy of an AR.....

@ArgosOrdnance Жыл бұрын

I shim and/or bed the barrels in place in all these rigs. The tight fit provides a marketed improvement in accuracy potential.

@HatsuneM1ku01 Жыл бұрын

Can you do an mp5 melt down as well as a ptr91 meltdown?

@StevenB6963 Жыл бұрын

Looks great I might need to pick one up soon. Do you think you might start building AR 10s?

@ArgosOrdnance Жыл бұрын

Yes, I have plans to offer R/Series AR10s (that will actually work out of the box) hopefully later this year. Will be getting other small frame cartridges up and running before that though. 6ARC and 300BLK namely.

@Rocksteady713 11 ай бұрын

Does this reach far enough under 15inch hand guard

@JVRottweil 8 ай бұрын

I want a block that I can shut the gas off almost entirely supressed. Thiso still seems to cycle the action even all the way down on light loads. I am guessing 300 blk subsonics its going to eject.

@eltenda Жыл бұрын

Science!

@timjohnson8390 Жыл бұрын

I gotta have it

@jayboogie9614 Жыл бұрын

So did you (iraqveteran8888) ever make the video showing us the max potential of a 7.62x39 ?? It's like you mentioned that you were going to be coming out with one for us 7.62x39 ppl don't leave us hanging brother and God bless

@Larrymoecurley Ай бұрын

What if you run all the way up to setting 12 ?

@m0bnm0n3y Жыл бұрын

Any gun smiths in in the comments I got an issue. I was cleaning my Glock 19 gen 4 and when I went to go put the slide back on the recoil spring pushed through the hole and is sticking out the front end of the gun

@bryanduchane2371 Жыл бұрын

First Argos rifle I've seen. Great collection of manufactures installed for sure. What would this rig set me back??

@Battlethief8 Жыл бұрын

Carbine for $1700, pistol for $1550, 18 inch spr for $1750

@martinkitevski7056 Жыл бұрын

Meltdow test on the XM7

@christiangonzalez89 6 ай бұрын

How long is your barrel and hand guard??

@johndavidson9331 Жыл бұрын

So basically you adapted the FAL gas adjustment system. Don't get me wrong. It's a great idea. Someone should have done this a long time ago.

@hairydogstail 9 ай бұрын

The FAL vents gas and the Rifle Speed restricts it..Different designs..

@JohnSmith-fi2gu Жыл бұрын

Adjustable gas blocks only fix over gassed not under gassed people i feel like that should be a disclaimer at the beginning of every glass block video

@mattfleming86 Жыл бұрын

Correct. That said, it is a LOT cheaper to drill up than it is to "drill it smaller" But even with a nicely gassed rifle, it is nice to have the ability to tweak the setting because of steel ammo, suppressors, etc.

@boygonewhoopdataZZ Жыл бұрын

This happened to me until one of my buddies told me to put his suppressor on and bam it worked flawlessly.

@godsdozer 7 ай бұрын

Yep, I have a stag arms 300 blackout, wont shoot subs without my can. Finally called Stag Arms and they said they send their pistols out to run only supers. Got to get the hole opened up to .095.

@sahzookey Жыл бұрын

If you make an 11.5 or 13.7 upper pinned and welded with YHM sRx flash hider I'd buy it.

@alijaber1111 Жыл бұрын

Where was that adjustable gas block before the semi automatic weapon ban in Washington State 😢I really want one!

@Americandog83 Жыл бұрын

Chad! Awesome work! Just curious how this might affect dissipater rifles? Thanks for what you’re doing, if I hit the big bucks I’ll invest heavily. I love to see Georgia build Georgia!

@ArgosOrdnance Жыл бұрын

You can absolutely use a Riflespeed on a Dissipator. You’d likely need to run a shorter plunger to provide more gas to the system due to the reduced dwell time; but it can made to work. Thanks!

@Rocksteady713 11 ай бұрын

Is your ar a 16inch

@DaveL9170 Жыл бұрын

Make then dual ambidextrous lowers for all items. Bolt release and mag release. Then I’ll buy one.

@ArgosOrdnance Жыл бұрын

I’ll be offering billet versions with right side bolt release and ambi mag releases in the future.

@andrewwilson8115 Жыл бұрын

Can you use this with a 350 legend upper?

@ArgosOrdnance Жыл бұрын

Between the gas control itself and the wide variety of plungers available to fine tune, absolutely. The Riflespeed can be made to work perfectly with any cartridge, barrel length, gas system combo out there.

@tomwinterfishing9065 Жыл бұрын

Start at setting 5, then you can go up or down accordingly. Quicker.

@jw5297 Жыл бұрын

What weight buffer?

@ArgosOrdnance Жыл бұрын

We set these rifles up for use with a standard carbine buffer and White standard power Sprinco spring. With the Riflespeed block, there is no need for heavy buffers to tame the system.

@jw5297 Жыл бұрын

@@ArgosOrdnance Thank you for the feedback. I ask because I have a preference for the Guiselle super 42 buffer spring and run an H1 in all my ARs now, but I don't run suppressors at this time due to lack of tuning knowledge in regards to that process, and I think the rifle speed devices are slick as snot, one of my fellow ranger buddies put one on his personal weapon and running a Franklin binary trigger and using it for that reason. But I look forward to getting my hands on one of your builds

@hairydogstail 9 ай бұрын

No need for buffers that are heavier than the carbine weight if the rifle is gassed correctly..Heavier buffers do not effect dwell time (bolt lock time) they only effect carrier velocity..The heavier the buffer the more perceived recoil..@@jw5297

@theiviachine Жыл бұрын

What’s that muzzle device? I know it’s Dead Air

@Jimmy.O. Жыл бұрын

Nvm, it's a keymo

@ArgosOrdnance Жыл бұрын

Forward Controls Design 6315KM. Standard on these rifles.

@theiviachine Жыл бұрын

@@ArgosOrdnance Thanks Chad!

@zgennaro Жыл бұрын

Just get a few PWS’s and call it good.

@ronpettit3200 Жыл бұрын

Would you use that gun in a combat .

@ArgosOrdnance Жыл бұрын

It is setup for duty use, so yes.

@ronpettit3200 Жыл бұрын

Thanks it looks like a great gun, I seen it on that little girls show

@mobilizedorb438 Жыл бұрын

How rigid is that adjuster? I feel like in adverse conditions it could get moved somewhat easily. Just my thoughts though, I run a poor build so I have no clue about this stuff 🤣

@ArgosOrdnance Жыл бұрын

It feels loose on the higher settings when new, but it’s never come out of position, especially once a little carbon gets built up.

@A14275 Жыл бұрын

You can run two springs and it will be very difficult to turn. Probably overkill. I just use the one spring it comes with and I’ve never had mine adjust accidentally in many thousands of rounds of hard use in the field.

@kearnstools1331 Жыл бұрын

Take my money

@jeremyparck5649 9 ай бұрын

Lol you should always run 2rounds to see if it chamber’s another round

@cheezychungus967 Жыл бұрын

Unga bunga

@oakland002 Жыл бұрын

I like the close up and pictures , for visual aid . Very informative Only thing I would have done differently is have a full mag , instead of having to instal one round at a time 😅

@Mjdeben Жыл бұрын

I think he was loading one at a time to check if the bolt was locking back on an empty mag.

@patrickcollins5945 Жыл бұрын

That would literally defeat the purpose. He's looking for bolt lockback.

@alexg9697 Жыл бұрын

I miss FPS Russia

@AB-qs7vw Жыл бұрын

Your videos aren’t showing up in my feed. Going to be more intentional in finding them.

@stephencooper5040 Жыл бұрын

They’re MPI tested? Do you mean that they are “high pressure tested” and “magnetic particle inspected?” Further, the second is basically nullified by not doing the first. So if they’re not doing the high pressure testing, the magnetic particle inspection is a waste of money…

@BreezyBeary 7 ай бұрын

I believe most bolts re mpi tested now

@mblake0420 Жыл бұрын

Sounds expensive

@jacksonnra1856 Жыл бұрын

Who is this short haired civilian? Powder makes rifle videos now??

@bryanduchane2371 Жыл бұрын

Do y'all plan on killing your own rails and receivers or going to use components by others in the manufacturing of your rifles?? Would be nice to have a company do turnkey assemble if the best components from selected manufacturers.....