Turbo LS3 Build - Part 1
Рет қаралды 6,756
3 жыл бұрынWe are going to be fully going through and building this LS3. It'll be a turbo daily driver LS3 set up, so nothing crazy.
More LS builds on our channel:
LS3 valvetrain upgrade on the 65 Nova - • LS3 valvetrain upgrade...
More 65 Nova LS3 build - • The LS3 is almost comp...
Other videos you might enjoy on the channel:
Fixing an overheating 63 Impala - • Traveling 350+ miles t...
64 Impala engine swap in 17 minutes - • 64 Impala engine swap ...
Here at ZHP garage, we do it all. Tune in every week for a look into our custom builds, arrays of car shows we attend, general service/how to videos we make, and multitude of races we participate in. We have over 25 years of experience, and can work on anything from the daily commuter, to a custom fabricated roll cage, to a custom Chevy C10!
For behind the scenes action, more look into our builds, and things not shown in the fully released videos:
Follow us on Instagram:
Camera Man: / rhziggy
Master Mechanic: / zhp72
ZHP Garage: / zhp_garage
Give us a like and check us out on Facebook:
ZHP Garage Facebook page: / zhpgarage
#zhpgarage #ls3 #turbols3 #enginebuild #fullbuild
@BrodieBro323 5 ай бұрын
Hey, thats the Barona track. :D
@the_boatswain 2 жыл бұрын
This is like watching Steph Papadakis do builds, the difference is he doesn't build engines I like --- you guys have filled the void! I really hope this takes off big, you've got all the right stuff! LOVE THE BUILDS, KEEP IT UP!
@ZHPGarage 2 жыл бұрын
Much thanks 🤙 we’re glad you enjoy them
@davidbarker7242 3 жыл бұрын
Thanks for the video, Did not know LSs were that different from earlier small blocks
@hafablake3599 3 жыл бұрын
I need one soon!
@pumasisneros1 3 жыл бұрын
Nice work
@mannysolis4588 2 жыл бұрын
How much in parts ?
@darrellmellon7819 2 жыл бұрын
Did you do ring gap for boost will the stock pistons stand 10 psi? Thinking of putting a procharger on my wife’s ls3 Chevy ss just wondering if I need to take it apart?
@ZHPGarage 2 жыл бұрын
I would maybe consider gapping the rings if you’re going over 7lbs, it definitely wouldn’t hurt.
@benjohnson6248 2 жыл бұрын
Do you need to align hone the mains if you're switching over to studs due to more clamping force? Or is it really negligible? Thanks in advance and great video!
@ZHPGarage 2 жыл бұрын
Some people say you do, some say you don’t. We didn’t hone this engine and will see how it goes.
@benjohnson6248 2 жыл бұрын
@@ZHPGarage Sweet! Just starting my own LS3 single turbo build and this series was invaluable. Great videos!
@lmar43 3 жыл бұрын
Good video. How do you find reliable LS engines in California LA area or SD
@ZHPGarage 3 жыл бұрын
Just gotta be on hunt, we’re constantly looking for good ones.
@reaperws6547 3 жыл бұрын
What’s your thoughts on arp studs without line honing block. I’m about to start assembly on my 6.2 block and studs were an after thought after I already had my other machine work done and when I went to buy studs said block had to be line honed with them. Really hate to take block back to machine shop and I’ve already got standard size main bearings, but will if it would be best just wondering how many have trouble that don’t line hone. It’s a 6.2 block stroked to 391 ci NA build if that matters
@ZHPGarage 3 жыл бұрын
We got a few other opinions and there seems to be mixed opinions about it. So I would go with what you think is best, maybe do a little research as well, we couldn’t really say 100%
超人夫妇
Рет қаралды 44 МЛН
GS PACKER
Рет қаралды 16 МЛН