Turbocharging A Barra Greentop

Рет қаралды 20,619

Күн бұрын

In this video i tackle the tasks of installing a turbo on my greentop and get it ready to install in my EB Falcon.
I need to drill an oil return in the sump, install some new valve springs, install a petrol intake manifold and injectors.
Hope you enjoy!
Follow me on the socials!
Facebook: / evrythingfuzzy
Instagram: / evrythingfu. .
If you'd like to get in contact with me:
Email: info@everythingfuzzy.com.au
Music in this video:
Insygnia
0:00 Intro
0:50 Installing Valve Springs
7:13 Drilling Oil Return In Sump
10:49 Bolting On The Turbo
15:47 Intake Manifold, Injectors, Loom
19:21 Plazmaman Top Half
20:14 Turbo Oil and Water Lines
23:50 Dip Stick Tube
25:35 Outro

Пікірлер: 64

@km-gi4lw Ай бұрын

Access with those 'fat ratchet spanners was overcome by looking around for old- school on the cheap ring spanners on the barra just hunt for the specific sizes shocking locations. In the day mechanics used valve lapping grit for m- cycle case sealing , might have helped when finishing off the final seal , just rubbing the fitting parts together . Enjoyed watching the video again thanks .

@rayackland3697 Жыл бұрын

Had to do intake manifold gasket myself while still in the car was definitely the most difficult thing I've done so far took 6 hours all up 🤣🤣 but great video mate very helpful

@happymanasfksubaru2846 Жыл бұрын

Its easy job take airbox you can get hand under

@PangazShed 6 ай бұрын

New to working on Barras (although I've had a couple of BA's and a Territory). Your videos have been awesome, loving the deep dives and the attention to detail. Wouldn't have been able to put together my current build without you! Keep it up mate, cheers.

@TurtleBuggLoz 2 жыл бұрын

Very good and informative video. Well done! Also.. killer music 🤘

@robcantwell1981 Жыл бұрын

Have only just found your channel. I quite enjoy it and find in informative. Keep it up mate. Rob

@sic04250f Жыл бұрын

Would love to do this to my FG xr6 egas ute one day.

@evildogbilly 2 жыл бұрын

Top video as always 👍

@EverythingFuzzY 2 жыл бұрын

Thanks for watching, Paul!

@jamesmartin-by9xh 7 ай бұрын

Tip for cutting braided hose…tape around the hose,use anglegrinder with cutting disc,alot neater cut,no fraying wire..

@bengibson3955 Жыл бұрын

Great 👍 info mate. Love the music you choose to go with your vids too. Keep up the great work and I’ll keep watching.

@EverythingFuzzY Жыл бұрын

Thanks for the support! Glad you’re enjoying the videos, more coming soon!

@bengibson3955 Жыл бұрын

Just another tip for the people out there. You can feed some rope into the spark plug hole to prevent the valves dropping while the retainers are out. No special air fittings required. 😉

@deeznuts6286 2 жыл бұрын

Great job matey 💪

@EverythingFuzzY 2 жыл бұрын

Thanks for watching!

@meXicossie Жыл бұрын

Love your vids … have a suggestion how about turning a turbo barra to lpg or running this on lpg, just curious what the performance would be like

@EnviXR81 2 жыл бұрын

Great video mate. I’m hoping to turbo an NA at some stage in the not too distant future. Very informative.

@EverythingFuzzY 2 жыл бұрын

NA+T build will be a lot of fun! barratheworld youtube channel just started a video on an FG na turbo buid. Check it out!

@mrmister5729 2 жыл бұрын

Excited to see it in the car 👀

@EverythingFuzzY 2 жыл бұрын

I’m excited to drive it! Thanks for watching.

@plumbs7199 Жыл бұрын

Good vid . I used 5/8 ( think it was ?) heater hose for the drain . 35000k all good . Checked it the otero day and still good !

@Ameliastaehr Жыл бұрын

Grate vid make keep them coming if I was to do a green top motor and all the bit of my ba turbo motor can I use my ecu ?

@lancecooper4646 2 жыл бұрын

Top vid m8 👍

@EverythingFuzzY 2 жыл бұрын

Thanks for watching, mate!

@julianalderson3938 9 ай бұрын

Great vid just wonderd if cold intake n better exhaust would help a lpg motor?

@onecrak 2 жыл бұрын

yep, had to pull turbo out of BA XR6 and refit whilst in the car and its a pain in the arse...

@EverythingFuzzY 2 жыл бұрын

The worst.

@peterb121 Жыл бұрын

I used the exact tool to change valve springs , the cut out sockets that comes in the kit need to be linnished at their backside for clearance , they hit the cyl head towers. And the washers supplied for the M6 bolts are just rubbish , you need to use 3mm thick washers. Other than that all good.

@age1714 2 жыл бұрын

Awesome videos mate very informative.. Just wanted to ask what was needed to install the Barra into the eb falcon.

@EverythingFuzzY 2 жыл бұрын

Thanks for watching! Had to modify k frame, make a bracket for the accelerator pedal, needed an AU bellhousing for the auto, had to cut out a rib on the bonnet as it hits rocker cover. Fair bit to do but its worth it 👍

@age1714 2 жыл бұрын

Thanks for responding mate.

@joshong1295 9 ай бұрын

Hey man! So you can just run petrol set up on a green top and don’t have to change valves or anything? I’m asking cos I wanna put a green top on my petrol na xr6 haha thanks

@whaddayawant2197 6 ай бұрын

Considering this is probably one of the few lpg factory 'performance' engines would you consider reviewing the lpg system.. and it's limitations. I can forsee lpg systems being used in performance applications more often.

@km-gi4lw Жыл бұрын

re Inlet manifold fitting (in car) the gasket was neatly cut in half between 3 & 4, seemed easier. 123 ! 456.

@user-dc4up6rq2u 9 ай бұрын

Hey bro did you have to change your valves when upgrading it to turbo?

@simplecodedeeker7823 Жыл бұрын

Put my intake mani on in my patrol today but shitty but only took 5 mins

@theclinchdrive Жыл бұрын

Hey man are these green top engine running on 98 or E85? I don’t want the hassles of E85 with one of my builds as I don’t plan to drive it all the time and don’t want the hassles of chasing up E85 every time I want to drive it

@shanevanwyk8776 Жыл бұрын

Did you leave the bottom end and pistons standard. Thanks.

@MrLrs2 Жыл бұрын

Hey mate what did you use to get the green rocker cover looking brand new like that again?? Cheers for all the info.

@EverythingFuzzY Жыл бұрын

I used a lot of workshop degreaser from Supercheap Auto and a sponge. Came up like new. Thanks for watching!

@filthyyates Жыл бұрын

just remove the Turbo brace or you turn the bottom left a top right stud into grade 8 bolts with tread tight then they lined up with an extension and socket

@TheHayruss Жыл бұрын

Did you have any issues or concerns with the Crow race valve springs or did you just want to try something different? Cheers H

@EverythingFuzzY Жыл бұрын

No issues with the Crow valve springs at all, they're still in my old red top. motor. The domintor springs were significantly cheaper so i wanted to give them a try!

@st333n Жыл бұрын

Hey mate have you done any other internals apart from the valve springs etc?

@EverythingFuzzY Жыл бұрын

Using an MLS headgasket instead of the original ford single layer gasket. I threw some replacement rod bearings in but the headbolts and pump gears are still stock for now. Thanks for watching!

@vazwnl 10 ай бұрын

did you put new oil pump gears in it?

@EverythingFuzzY 10 ай бұрын

Nah, I’m using factory oil pump gears.

@1616Rotor Жыл бұрын

What do you think of the toolpro electric ratchet?

@EverythingFuzzY Жыл бұрын

Love it, mate! can't beat it for the price. Use it all the time!

@1616Rotor Жыл бұрын

Yea I've been looking at getting one, it's Soo much smaller than say Makita, DeWalt, and Ryobi ones, and much cheaper than Milwaukee and snap on

@adampollard7944 2 жыл бұрын

What's the actual song title by insygnia my dude

@EverythingFuzzY 2 жыл бұрын

It’s called What Does This Mean. Thanks for watching!

@bradwright9586 10 ай бұрын

We're are u located I need my engine built

@EverythingFuzzY 10 ай бұрын

Near Melbourne

@AngryGermanGarage 2 жыл бұрын

I have changed an intake manifold in the car. It was not fun, not at all.

@EverythingFuzzY 2 жыл бұрын

R.i.p

@dphothisane Жыл бұрын

do barra green tops fit in ford territory

@n8o8n Жыл бұрын

Yep!

@aciawin9861 Жыл бұрын

was this a bf greentop?

@EverythingFuzzY Жыл бұрын

Yes it is

@aciawin9861 Жыл бұрын

@@EverythingFuzzY beautiful exactly the same as mine, would you mind writing a complete parts list for myself and any others interested? ill 100% rent a garage and get this done at some stage. cheers, love all the videos!