TurboJet Engine (3D Printed)

Рет қаралды 2,112,838

3 жыл бұрын

The first 100 people to go to www.blinkist.com/integza are going to get unlimited access for 1 week to try it out. You'll also get 25% off if you want the full membership.
Follow me on Instagram: / integza
Support me on Patreon: / integza
Discord: / discord
Reddit: / integza
Paypal me:paypal.me/jgomes1992?locale.x...
3D Models
Turbojet Engine: www.thingiverse.com/thing:477...
Siraya Tech Resins (Engineering Resins):siraya.tech/collections/all
Tucab filament:www.botnroll.com/en/filament/...
Intro Animation:www.fiverr.com/mutlutuncer
Music
Tropicao by AwaDu Artlist
Yadda Yadda Ya Instrumental Version by Anthony Lazaro Artlist
Tick Tock Blues by The Bottle snakes Artlist
The Speakeasy by Stefano Mastronardi Artlist
Boom Instrumental Version by Anthony Lazaro Artlist
Sunset by Jally Kebba Suso Artlist
The Funny Neighbor by Anthony Vega Artlist
Mood Instrumental Version by WEARETHEGOOD Artlist
Sottolasabbia by Trio Particular Artlist
Bachatta Button by Skygaze Artlist
The Day Before by Maya Belsitzman Matan Ephrat Artlist
Strange Behaviour by Matt Stewart Evans Artlist
Cities Under Guns by Francesco DAndrea Artlist
Black CatSoiree by Bob Hart Artlist
Learn How to Walk by Ziv Grinberg Artlist
Sneak Peek by Alon Peretz Artlist
Merry Christmas by Zac Nelson Artlist
Mood by WEARETHEGOOD Artlist
A Simple Matter of Fate Instrumental Version by Bunker Buster Artlist
Conga Disco by Matt Stewart Evans Artlist
So Fresh by Rex Banner Artlist
Noidelsud by Orazio Saracino Artlist
Shantytok The Wellerman by SPEARFISHER Artlist
Belong to You Instrumental Version by Denitia Artlist
Play with Fire by RocknStock Artlist
Slime Time by Randy Sharp Artlist
StillLife by ANBR Artlist
#3dprinted #turbojet #engine

Пікірлер: 8 300

@integza 3 жыл бұрын

The first 100 people to go to www.blinkist.com/integza are going to get unlimited access for 1 week to try it out. You'll also get 25% off if you want the full membership.

@itsmealextheme6259 3 жыл бұрын

@vittorioqwerty 3 жыл бұрын

ausome video integza

@Irish0wl 3 жыл бұрын

Love your vids!

@ayjzertgamer4594 3 жыл бұрын

hello integza make a rocket powerd rc car pleas

@FARMERHARDY 3 жыл бұрын

he linked the discord join it now

@PeterSripol 3 жыл бұрын

69420 out of 10, using the 3dprinted male and female parts to make the turbine blades is geeeeenius

@ccf_1004 3 жыл бұрын

Peettteerrr STTTttrrrriiiippppooollll!

@shilohbursle8859 3 жыл бұрын

The legend himself🙏

@dfct9494 3 жыл бұрын

You um are impressed by a mold?

@wolfsworkshop9095 3 жыл бұрын

@@dfct9494 stamped metal

@Shonty_on_gfuel 3 жыл бұрын

Peettteerrttr

@Weisz 3 жыл бұрын

Every one of these builds is absolutely mental, you’re a legend my dude - mad props.

@ahumanbeing7554 3 жыл бұрын

Not props. We did away with the propellers for the turbojet engine.

@nathanmccormack4681 3 жыл бұрын

@@ahumanbeing7554 aweeee you got there first 😭

@donutninja13 3 жыл бұрын

Chicken man!

@pancake5830 3 жыл бұрын

@@ahumanbeing7554 darn it, i was too late

@justgottasendit8825 3 жыл бұрын

Your turn. Let’s see a chicken powered engine to recycle all the meat beater victims lol

@lukearts2954 2 жыл бұрын

17:25 "for some reason the lubricant is not getting to the ball baring" - I think it does, but if you look at the footage before that point, you'll see a bright blue flame coming out of the lubricant tube, which means that it just burns off and even increases the temperature of the bearing... I would conclude two things: you're using the wrong type of lubricant, and there's a connection between the bearing and the combustion igniting the lubricant. =)

@bluespidergaming7719 Жыл бұрын

to be fair he was using wd 40 as a lube in an un protected bearing in a jet engine

@TheDarkElk Жыл бұрын

@@bluespidergaming7719 Yeah, grease would probably be better, wd40 isnt going to do much for a bearing even if it wasnt burning

@bluespidergaming7719 Жыл бұрын

@@TheDarkElk or a bearing chamber with oil

@littlebacchus216 2 жыл бұрын

I have binge watched Integza and this is by far one of my favorite builds. That engine glow when it sprung to life is just sexy. Why isn't Integza recommended to every ElectroBOOM, BobbyDukeArts and ColinFurze fan out there?

@YetAnotherJohnSmith 3 жыл бұрын

Can we appreciate his excitement lasted longer than his engine? Also, being an engine builder for trikes, I know and understand blowing up something "but it worked" feeling

@haipingcao2212 Жыл бұрын

@dunodisko2217 3 жыл бұрын

“In the name of Colin Furze, Isaac Newton, and propane fuel, amen.” -Integza, 2021

@shutdahellup69420 3 жыл бұрын

had me rofl 😂

@mightydeathlash2867 2 жыл бұрын

The prayer came thru too! Looks like it works better than the one from the Bible.

@sospex9805 2 жыл бұрын

A prayer of "mechanic engineer"

@erusenger 2 жыл бұрын

Instantly put a smile on my face.

@randallracer 2 жыл бұрын

But he forgot propane accessories. If he said that itd run long enough for him to not make a v2.

@escortturbo98 2 жыл бұрын

I'm a little late, but if you want to revisit this some day, consider going to a scrapyard and get and old turbocharger as a donor for the compressor and turbine. It might require some modifications but if it works you can enjoy your rocket engine for a little longer.

@Boltman47 2 жыл бұрын

Even though I know I have zero understanding of what's going on, your ability to help me feel like I understand the important parts of what's going on is unique. It makes me feel involved instead of just talked at. Great work my friend, happy I found your special channel.

@purplepumkiin4851 3 жыл бұрын

Can we talk about the fact he's making jet engines in what looks like his attic.

@david6054 3 жыл бұрын

Well... where do you do your mad sciencing?

@bw1532 3 жыл бұрын

What about that fact would you like to talk about?

@purplepumkiin4851 3 жыл бұрын

@@david6054 In the basement, if my house is going to burn down I want it to all burn

@david6054 3 жыл бұрын

@@purplepumkiin4851 Acceptable

@ricardofranca1186 3 жыл бұрын

With 3d printed parts

@superdupergrover9857 3 жыл бұрын

#2. rule of welding: DON'T wear synthetic fibers! Synthetic cloth melts on contact with hot particles, then the hot drops of plastic stick to your skin and burn you. Kevlar and Nomex are the exception, they act more like natural materials. Natural materials, like cotton, wool or leather, burn and char but do not melt, usually keeping hot particles off your skin. Even if it does burn through, it won't be covered in molten sticky plastic. Check EVERY tag of your clothing, shirt, pants and even your socks. A lot of T-shirts are synthetic blends with cotton. Get leather shoes, preferably boots without laces. Laces will trap hot particles; if you do get lace up boots, replace the laces with leather or at least cotton or another natural fiber.

@gordonlawrence1448 3 жыл бұрын

Absolutely dude. I got into the habit so much I now only wear cotton all the time.

@Hawkido 3 жыл бұрын

Grade A advice, many newbies might not think of these things until they get burned, pun intended.

@beanieteamie7435 3 жыл бұрын

@@Hawkido I recommend getting some very protective boots as well, I can't stress enough how much I've appreciated mine every time a glob of molten steel dripped onto em.

@unknownutensils1840 3 жыл бұрын

Welding ppe goes for pretty much the entire workshop, you can catch fire from anything that gets hot, ive got experience in quite a few areas with catching fire

@NesiasvonWolfen 3 жыл бұрын

THIS! also gloves, leather welding gloves are a must unless you want sunburns and skin cancer. Also for the weld beads themself, more gas if that welder uses gas (should be CO2/Ar mix if you are welding odinary steel) and higher wire speed (looks like its way to slow and even burns back). EDIT: Also remove that zinc before you weld, zinc oxide fumes are no joke, just feeling sick for some hours after exposure is still a good turn out!

@greasemonkey7744 Жыл бұрын

just gotta say your determination and ability to learn new things to make the things you do is great! i do a ton of non standard fabrication and custom vehicle work and its awesome to see someone finding ways to just make things work love all the vids been watching for a couple years now and never pass when a new one pops up

@eagle3906 2 жыл бұрын

Your face of pure delight when it started is so wholesome! Epic journey and amazing project.

@Voltaic 3 жыл бұрын

Not taking into account the skill of the welder, you never had a chance to make good welds with this since you tried welding steel with a zinc layer. Thats a big nono. Grind the Layer off everywhere it gets hot on both sides and dont breathe it in. Zinc fumes are extremly dangerous.

@rompdude 3 жыл бұрын

This!

@ThePcGamingBoss 3 жыл бұрын

also flux core is doo doo for sheet imo.

@schwalbenflug3350 3 жыл бұрын

I once welded a zinc tube to a furnace for a forge. It was a really stupid idea. Was sick three days after. Integza should really look up more about welding.

@klausbrinck2137 3 жыл бұрын

Integza beware of your health !!!

@petergregorypottery5476 3 жыл бұрын

@@klausbrinck2137 Beware of Tomatoes!

@austinleonard2206 3 жыл бұрын

"that's why he has 13 kids" made me laugh. An endurance test for jet engines on airplanes is throwing a chicken in it. Let's see if your next engine can withstand 13 tomatoes ;)

@chickenman7032 3 жыл бұрын

Ahhhh o no a chicken 😵

@alexanbreizh6337 3 жыл бұрын

@Infamousvlogger Yes but that chicken was alive at some point ... I would rather throw it in my oven.

@prabhkaransingh3363 3 жыл бұрын

next project idea - build a plane using one of the many engines you have built and release some dirty tomatoes while watching them scream and being mushed after falling on the ground. love your videos and will wait eagerly for the next one

@RobertLeyland 3 жыл бұрын

Also, don’t use a frozen chicken for this test!

@eamonia 2 жыл бұрын

Holy cow... After years of watching dozens of your videos, by gum you finally did it. You made something that actually works! Here's to a thousand more 😊

@mariolibrado5084 Жыл бұрын

I just love how he uses such different materials and productions in different places depending on the local demands to make such a well thought out muchin Thanks for the amazing vids .keep it up .

@phoneaddict3585 3 жыл бұрын

“My grandpa always said you can’t have too much lubrication” 😐 “maybe that’s why he had 13 kids“ Bruh that got me

@robblerouser5657 3 жыл бұрын

LOL!!! Up-vote from me.

@user-cp1ce5mu2v 3 жыл бұрын

@@robblerouser5657 r/ihavereddit

@abliviustrey 3 жыл бұрын

@@robblerouser5657 r/ihavereddit

@lokeypokey9744 3 жыл бұрын

@@robblerouser5657 u/ihavereddit

@willkwon7644 3 жыл бұрын

Theme: Make a ion thruster and use it to burn some tomatoes or a railgun, that would be freaking awesome.

@filgiupo4853 3 жыл бұрын

dont edit

@willkwon7644 3 жыл бұрын

@@filgiupo4853 what?

@diegonogueira8222 3 жыл бұрын

Seriously? soon, the people will aks for him to make a warp drive, a nuclear bomb, a functional rocket engine to reach orbit or so? c'mon..

@willkwon7644 3 жыл бұрын

@@diegonogueira8222 what do you mean? I think both are feasible ideas.

@diegonogueira8222 3 жыл бұрын

@@willkwon7644 dude, do you know what it neet to make a ion truster? you need to sustain tousands of volts into a vaccun chamber with an constant electric field, just to ionize a (very expensive) noble gas into an plasma in such a way that you contain it and redirec part of it (charged) into a nozzle, for further neutralize it somehow. Many experts and universities work into that just to make it work and produce incredible tiny amount of trust, by using state-of-the-art tecnology. I though that thoes sugestions are supose to do a feasible idea. If not so, easly you could prupose to do a fusion reactor, a particle accelerator or anything else lol

@mikeconnery4652 Жыл бұрын

Great build. I like that you explain the steps and then do the building. And then you have to go back and redo something. In this video you showed learning something new. This is what your videos are about. Prefect

@vintagemotorsalways1676 Жыл бұрын

The primary reason for your welds turning out the way they are is a lack of shielding gas, when using "flux core" wire there is no way to completely prevent oxygen from remaining in contact with the active weld which results in oxidation and leaves an undesirable result. This is why most welders use an inert shielding gas such as argon or CO2 which are often blended in an 75/25 mix or helium and argon in a 50/50 mix depending on the application. As an aside you should always wear gloves while welding to prevent UV burns to your skin and never wear gloves while using a bench grinder or an angle grinder as if the glove makes contact with the active wheel it can pull your hand into the abrasive.

@kdahm1 3 жыл бұрын

Can we all pitch in and get this man a CNC? The things accomplished with simple tools on this channel is mind blowing. Love the content man!

@larslansing5618 3 жыл бұрын

one like johnny90 has

@kdahm1 3 жыл бұрын

@@larslansing5618 100% a PocketNC. Tell us how we can help you get one Tomato lord.

@Lucas_sGarage 3 жыл бұрын

Like the pocket nc V2 it's a 5k machine, but still mabey

@rattyratstuff7125 3 жыл бұрын

mini cnc would be dope. and some instructional vid so we can all try it.

@paperflight5803 3 жыл бұрын

If he put a project in kickerstart or etc, I will support

@erikpatrone1077 3 жыл бұрын

Can we just take a moment to speak about the song? U really caught me off guard with that Italian song

@brighamruud5090 3 жыл бұрын

IT SAID IMPOSTER IN IT😳😳😳😳SOUNDS LIKE AMOGUS TO ME😳😳‼️‼️💀

@Andrea-gh5qq 3 жыл бұрын

Lol that surprised me too ( im italian😂)

@spike_the_dragon1748 2 жыл бұрын

@@brighamruud5090 Actually mate it says " La fila in Posta" , ye sounds like "imposter" ;)

@redactedredacted4080 2 жыл бұрын

What is the name of that song anyways?

@erikpatrone1077 2 жыл бұрын

@@redactedredacted4080 Name of the song: "Noi del sud"

@awesomeapollo428 2 жыл бұрын

For version 2 try using multiple impellers to compress the air more as it gets closer to the combustion chamber. great to see you succeed building a turbo jet.

@juggernaut3299 Жыл бұрын

I have had your videos suggested. I find them entirely entertaining, you are really funny in a nerd way, which I love, here is the difference. when you interview other scientists in industry, it really shows you are legit, and you have their respect. I really enjoy your work.

@1soupasaurus 3 жыл бұрын

Grinder and paint make me the welder I ain't. -AvE, since the beginning of his channel.

@justgottasendit8825 3 жыл бұрын

Exactly. Words of wisdom from AvE

@kz03jd 3 жыл бұрын

@@justgottasendit8825 I wish I knew just a fraction of what that man seems to know! Been following him for years and don't even know how I came across his channel as this was before he was so well known like he is nowadays, but I'm sure as hell glad I did! Learned a lot, and laughed even more.

@goldenfox334 3 жыл бұрын

just got done telling him that. i was thinking it was this old tony who said that but i could see ave saying it

@rattyratstuff7125 3 жыл бұрын

i laid 1 flawless bead once. flipped out haha

@danyalag3366 3 жыл бұрын

"In the name of Colin Furze, Isaac Newton and Propane." 🤣🤣🤣

@keithyinger3326 3 жыл бұрын

In the name of Colin Furze, Isaac Newton and Hank Hill would be my quote :)

@LegendaryGodKing 3 жыл бұрын

This shit was the best

@harriwade7836 3 жыл бұрын

the holy trinity

@maeve615 3 жыл бұрын

That reminded me of when I was a kid getting dragged to church, I'd always say "In the name of the Harley, the Ural, and Honda Suzuki"

@finonevado8891 2 жыл бұрын

2nd video I watch and you sir have a new subscriber, this is the kind of hands-on approach to science that's compelling to watch

@colbychildress9792 4 ай бұрын

Congratulations, this was my most favorite build that you have done

@ruuman 3 жыл бұрын

Awesome work dude. just one tip, get some welding gloves, you will get some deep UV burns otherwise. Get tig gloves, they are thin and easy to work with. Take it from someone with bad skin damage, you don't want it. Also move to gas shield over flux core when you can afford it, its much nicer to use.

@mozkitolife5437 3 жыл бұрын

Gas shield FTW. Much easier to get a nice bead

@dontnubblemebro 3 жыл бұрын

Proper self shielded is fine, takes a few seconds with a wire wheel to tidy up, plus it tends to get in a bit better.

@abelsz4407 3 жыл бұрын

I weld with rod, and one time I forgot to put on my gloves and my long sleeve welding jacket. I was building a ladder frame for a heavy duty trailer, it took like 10 hours of nonstop welding. Every uncovered square inch of my body was deep red after that. So yeah, UV is a b*tch.

@W1gglePuppy 3 жыл бұрын

All of this, get gloves and if your welding inside for ease of filming, ventilate the space. Welders flu isn't fun, and heavy metals in the lungs is never good. Also watch your splatter, if a bead goes between the floorboards your attic is probably on fire. Learn with shielded MIG, especially working on that thin gauge. Your going to get cleaner welds, I also feel like it gives me more time during the weld. Love the 3d printed 2part moulds!

@ANATURALDREWSASTER 3 жыл бұрын

I noticed his hands were red after the welding scene lmao

@The_Mr_mak 3 жыл бұрын

“you can never have to much lubrication maybe that’s why he has 13 kids” -intgeza 2021

@IndustrialParrot2816 2 жыл бұрын

oh boy

@mulciber7428 2 жыл бұрын

For evry one who searches this part: 17:58

@pascaledits7219 2 жыл бұрын

😂😂😂

@gabeestes1276 2 жыл бұрын

This video made me feel better about my inability to weld. Thank you for showing the process of your welding, I'm still learning, and it's nice to know the bug boys struggle too

@theonlywaytogta6665 8 ай бұрын

Cool video. I like that how you went about designing and building the rocket engine did finally yield good results, but the process was pretty difficult. It perfectly illustrates the process of invention and realization, and how truly challenging and difficult that is when done properly. I also liked that you didn't give up even with all the iterations this project went thru. Thanks, I always find your content very entertaining and I always learn alot.

@pinker4922 3 жыл бұрын

"My grandfather always used to say, you can't have too much lubrication. Maybe that's why he had 13 kids." LMFAO

@AsitShouldBe 3 жыл бұрын

As italian i appreciate the soundtrack LOL.

@lennardbos4218 3 жыл бұрын

As a dutchman I do to, but I don't know what its about😂😂

@tubeampsrule1 3 жыл бұрын

What's the name of that song around 13:30?

@AsitShouldBe 3 жыл бұрын

@@tubeampsrule1 is not a famous song, i read in the description SOTTOLASABBIA BY TRIO PARTICULAR ARTIST.. bye

@AsitShouldBe 3 жыл бұрын

@@lennardbos4218 the song speak about southern people of italy😉😁

@whoisryanp 3 жыл бұрын

What’s the name of the song?

@internalerror00 2 жыл бұрын

Using a 3D jig for bending the fins just right was clever. Great stuff.

@davesdigitaldomain 2 жыл бұрын

at 19:47 you reminded me of mad Doc Brown from back to the future when he said " it works... I finally build something that works"

@PlasmaChannel 3 жыл бұрын

Hahahaha ASMR segment has me rolling 😂Also, awesome job on the concrete staying together.

@harryprendergast7499 3 жыл бұрын

hmmm commenting before you finished the video

@PlasmaChannel 3 жыл бұрын

@@harryprendergast7499 pretty normal thing, yes :P

@pvic6959 3 жыл бұрын

honestly asmr is ok, but it doesnt really work for me. That said, I would love to see more lol. It could become a running joke on this channel!

@harryprendergast7499 3 жыл бұрын

@@PlasmaChannel wow My favorite KZfaqr actually replied thanks man

@Eireman_on_Twitch 3 жыл бұрын

I am IMPRESSED that the cement ended up as a functional series of components! Well done, you are now an official turbo jet engineer!

@adritoghosh8839 3 жыл бұрын

17:59 - "My grandfather used to say u can't have too much lubrication thats why he used to have 13 kids" really integza.............

@strikertgio2367 Жыл бұрын

Ayo

@jannejohansson3383 2 жыл бұрын

2:30 is turbofan. Inside there maybe turbojet, but it's attached to big fan and it makes big part of engine work and output power.

@gmvpmb Жыл бұрын

Just found this site from Plazma channel and the stuff between the two. Love the work

@Nerdforge 3 жыл бұрын

Amazing that you got it to work! Love these videos! :D

@integza 3 жыл бұрын

Thank you so much guys!

@prabhkaransingh3363 3 жыл бұрын

@@integza hey Integza next project idea - build a plane using one of the many engines you have built and release some dirty tomatoes while watching them scream and being mushed after falling on the ground. love your videos and will wait eagerly for the next one

@doge-co 2 ай бұрын

I was not expecting y'all here lol

@hallelujahxo298 2 жыл бұрын

As a welder my self i appreciate the amount of effort he put into the project to show how actualy hard it is to weld but still he did a good job for someone with no experience so congrats mate

@squarebodycasewademckenney6190 2 жыл бұрын

Useing a wire feed with gad is easy i tryied it from the get go and my welding instructor was baffled and insisted I've practiced before but I didnt.... now stick welding it tough I never got past the basics (regular stright line looking down at the metal)

@CoolAsFreya 2 жыл бұрын

Last time I welded anything was in workshop class in highschool, I bet if I tried again today my first dozen practice welds would look like his

@annyeong6373 Жыл бұрын

I’m not a welder, nor have I ever welded, and I was also impressed by his effort and the fact that he showed the process of learning something: you have to be shitty at it for a while.

@chucksweet7533 Жыл бұрын

Looked like he was trying to run it with no gas, or at least not enough of the right gas, the surfaces were all oxidized and the welds bubbly. I am very glad he made enough smal welds that the whole thing stood up without popping on him. For a non-metal worker he sure did a decent job of faking it.

@quark3415 8 ай бұрын

A monkey could weld, its not hard

@nos1000100 2 жыл бұрын

that song used during the assembly of the combustion chamber was fire

@patrickmackinder8616 2 жыл бұрын

The excitement of when the engine began self sustained operation was tremendous. You probably need to use some bleed air from the compressor to cool the combustion and turbine sections.

@momentiumengine1424 3 жыл бұрын

"In the name of Colin Furze, Isaac Newton, and propane fuel." I am SO going to use that.

@chadxcore8749 3 жыл бұрын

that was hilarious 😂

@fragfb4175 3 жыл бұрын

Same.

@lewismassie 3 жыл бұрын

Some Wright brother's facts for you all: - The Antonov 225 is so large that the entire Wright flight could take place within it's cargo hold - The engine used on the Wright Flyer was so light because it was made of aluminium, not steel. They painted rust onto it to hide this fact - Orville Wright publicly ridiculed attempts to make transatlantic flight

@xelafed 2 жыл бұрын

I was so happy for you when that finally works ! Let's gooo !

@sharkamov 3 ай бұрын

Integza; Your inventor enthusiasm [coupled with the way you are making these videos, which obviously takes a lot of effort and not least _time,_ I'm sure] is _very_ contagious (and addictive!), wish you all the best of luck with future ideas and projects & your Y.T.-channel! 👍

@callsigncarrot8742 3 жыл бұрын

Me: he has no precision tools, no way it will work. Integza: watch this.

@alientehnologi 3 жыл бұрын

Well what is 3D printer? Not precise? :))

@JasonP6339 3 жыл бұрын

@@alientehnologi not at all

@Nonpain 3 жыл бұрын

@@sonacphotos for fdm yes ,sla though is a lot more precise but you are limited with resin.

@santiagoperez2094 3 жыл бұрын

@@JasonP6339 it's a ultra violet résine one so it's as accurate as a digital screen

@callsigncarrot8742 3 жыл бұрын

@@alientehnologi yeah but not his metal working, those hand tools are anything but lol

@MurkyWaters677 3 жыл бұрын

Don't be afraid to prop your arms a bit when you're welding. You'll be far more stable and have better control. EDIT: BUY SOME WELDING GLOVES!

@reaganharder1480 3 жыл бұрын

For real. Those bare hands next to the arc were giving me anxiety.

@gavincarstens6497 2 жыл бұрын

has to search for this comment before I added my own.. every time I watch someone weld without gloves I cringe!!

@MurkyWaters677 2 жыл бұрын

@@gavincarstens6497 At least he's not welding in a wifebeater and shades. That's how you get a 2 minute tan with a side of melanoma

@3ch0_17 2 жыл бұрын

I think his problem is the lack of shielding gas

@grimfpv292 2 жыл бұрын

You'll get arc sunburn!

@baleshwarsahu6280 2 жыл бұрын

You really work hard to make your audience.i appreciate your work

@chrisoakey9841 Жыл бұрын

you could use and auger as a pump for each side. I would love to see the exhaust come out of a circle of ports taking advantage of the venturi effect . if you put a second cone around the outside you should maximise thrust.

@adamvalt6609 3 жыл бұрын

A video dedicated to sugar rockets would be amazing concept for future video! It is pretty easy to make, (you only need a few basic chemicals) really scalable (can be huge), high thrust, and you can destroy a lot of tomatoes with it! (Or launch them to the moon!) edit: also did you try wax rockets? Or expansion-deflection nozzles(that is going to be hard). Also another idea: buy a mini engine and try to power something with it. Maybe something like a rc car. But they are pretty expensive and almost impossible to make at home without necessary tooling(lathe, cnc mill). Tomatoes are disgusting.

@andy_liga 3 жыл бұрын

And getting 99% pure KNO3 in Spain/Italy is extremely easy, just ask any butcher and they are happy to sell you kilos of it (I'm Italian and been doing it for fun for several of my teenage years)

@nic.h 3 жыл бұрын

@@andy_liga Curious what the butchers use KNO3 for?

@jakehurwitz2154 3 жыл бұрын

I literally suggested the same theme last time

@blanana_m 3 жыл бұрын

He did that in his aerospike nozzle video

@jakehurwitz2154 3 жыл бұрын

@Simonas Aukštuolis Yes but if they're guided, the tomato destroying possibilities are endless

@coopermeshew4298 3 жыл бұрын

Welding, grinding, and testing jet engine in a dry wood-framed attic. Seems safe to me. Lol

@kshatriya1414 3 жыл бұрын

Yeeea, He should definitely invest in some welding blankets lol

@Hellsong89 3 жыл бұрын

That got me "little" nervous since i do have fire working permit.. though if he did proper safety checks and procedures it should be fine, but it involves waiting several hours as fire watch (after every fucking time sparks are created) on the site to see if anything started smoldering... yeah i think he might want to get new place for his hobby/proper workshop. If his backyard has enough space, maybe put in a shipping container as workshop/test site, or renovate some place to really work as workshop that can be welded on.

@goldenfox334 3 жыл бұрын

@@kshatriya1414 welding without gloves is a good way to get burned good too. i welded without a jacket one with a stick welder one time and god the sunburn i got was horrible.

@MrKaiyooo 3 жыл бұрын

It kinda is. The exhaust fumes can just flow through the tiles. Don't forget. Carbon monoxide is the real silent killer.

@goldenfox334 3 жыл бұрын

@@MrKaiyooo thats also a very good point

@alhaste8683 2 жыл бұрын

I thought I had subscribed but I hadn't.. so I did.. I loved this video. Best part was the look on your face when that engine ripped into life.. keep up the good stuff mate

@Professional_FunHaver 7 ай бұрын

As a machinist who studied/studies aerospace engineering and is currently making another jet engine, I just want to say you designed and made everything right. One piece of advice is that you need more fuel pressure on startup than you had due to the mass influx of air.

@egamersmk771 3 жыл бұрын

"in the name of colinfurze"

@AdamGreenwell 3 жыл бұрын

...Isaac Newton and propane fuel. Sounds like a holy trinity right there.

@paddlesaddlelad1881 3 жыл бұрын

amen.

@ghostinmatrix 3 жыл бұрын

In high-speed applications like this turbo jet engine roller bearings like the ball bearing you used is not recommended. Instead you should try and look into precision ground surfaces and slide bearings to reduce the number of parts that can fail.

@NickY-lx7rr 3 жыл бұрын

For sure, a good high precision bushing could transform this build

@rafiulazim8960 3 жыл бұрын

Top you go

@billymonday8388 3 жыл бұрын

bushing will never work, ball bearing is whats used. unless you mean air bushings

@ghostinmatrix 3 жыл бұрын

@@billymonday8388 well, they do work perfectly fine in turbochargers and are still state of the art there, i think they can handle the much lower rpm of a turbojet just fine...

@yabojabo8578 3 жыл бұрын

Negative. At these high speeds and low loads journal bearings would be unstable and self destruct in seconds. Journal bearings also require 10x the lube flow of rolling element bearings. That would be challenging. Rolling element bearings are perfect for this application. They will only last a couple hundred hours at best, but that turbine probably won't last beyond 10 hrs so it's GTG.

@spray_cheese 2 жыл бұрын

We getting a part 2 on this one? By far my favorite engine you’ve made

@evilke-kneebone8025 2 жыл бұрын

Dr. Hans Von Ohain is considered the designer of the first operational turbojet engine, Whittle was first to register a patent for his schematics of a prototype, in 1930. Von Ohain obtained a patent for his prototype in 1936, and his jet was the first to fly in 1939. Whittle's took off for the first time in 1941.

@levidennison9811 3 жыл бұрын

Im a welder my self and it was so hard to whach you do this

@McOffsky 3 жыл бұрын

Im no welder (I've welded like 15cm in total in my entire live), and this was painful to watch. It looks like self-shelding wire, or not enough shelding gas. But for me, the worst crime was NO WELDING GLOVES and not enough protecting cloths/equipment. During welding there's a lot of heat, UV light and harmful gases. If you want to be a welder and live at least a day ober 50yo, remember to protect yourself.

@matthewtremain683 3 жыл бұрын

@@McOffsky yep. Even a pair of $10 leather rigging gloves will do the job.

@theflyingbrit6345 3 жыл бұрын

his welding may not be the best but hey it sustained itself

@fakehesap1731 3 жыл бұрын

welder gatekeeping aside he used gloves to fucking remove plastic but not for welding bruh

@hairymcnipples 3 жыл бұрын

@@theflyingbrit6345 mostly by luck, weld flaws can easily be invisible. It's also very likely to fucking kill him. Welding is dangerous.

@MoonFlux 3 жыл бұрын

The fact he got something working, with fire the "first try" is amazing.

@Gaming_Badger 2 жыл бұрын

This guy has a wide range of humor both funny and stupid well not stupid ig but you know stupid things are funny now this guy deserves some subs

@normanray9403 11 ай бұрын

19:45 when they made the first ever turbojet engine work.

@Ev.FromMars 3 жыл бұрын

"In the name of Colin Furze" had me. 😂😂😂 Well done mate.

@malos9680 3 жыл бұрын

Dude is just invoking the correct gods

@thirdeyenz 3 жыл бұрын

I'm sort of surprised massive blades didn't suddenly appear on it.

@loopymind 2 жыл бұрын

That 3D printed turbine blade press is actually really clever :)

@Dev255 2 жыл бұрын

Very nice video, I was right with you for the successful run, plus, nice socks 👍👍

@luissoule 8 ай бұрын

I really enjoy your videos, especially this one cause i love turbojet engines too. Also really enjoy watching the ionic plasma video. All i can say is keep going as from now on i will follow your videos.

@iBeast_M0de 3 жыл бұрын

A wise man once said: A grinder and some paint makes me the welder that I aint

@integza 3 жыл бұрын

I love that quote !

@butterbaybiscuits8694 3 жыл бұрын

Bless the Kingdom of Dirt and its Canadian Pesos!

@cambridgemart2075 3 жыл бұрын

@@butterbaybiscuits8694 Do you not mean Canuckistan Peso's ?

@remiqaine 3 жыл бұрын

@@butterbaybiscuits8694 Canuckistan Kopecs

@iBeast_M0de 3 жыл бұрын

@@butterbaybiscuits8694 This! Hahaha

@skwerleyz 3 жыл бұрын

"I almost burned my face" My guy you almost blew your hand off 😂

@fantasticphil3863 3 жыл бұрын

Yep. Got me scared.

@abnormaalz 3 жыл бұрын

My guy almost burned his ATTIC DOWN

@simekon80085 2 жыл бұрын

True, it would be like the burn Colin furze had.

@medanisjbara1348 2 жыл бұрын

MAN your videos are amazing.

@enderreaper9240 2 жыл бұрын

you know what my fav part about this video is? the awesome italian music as well as the sensual and purr from the engine... i could listen to that purr for hours Also this is my fav of all your videos

@tsbrownie 3 жыл бұрын

The metal fan you made looks like the ones to cool motorized hand tools. Oh, and never weld in enclosed spaces or within 10 meters of ANYTHING that burns. Trust me on that.

@PLAYERSLAYER_22 3 жыл бұрын

this ^^^^^^

@alexharvey9721 3 жыл бұрын

I second that lol

@undersiege3402 3 жыл бұрын

i just did next to some propane tank and kerosene gallons and i dont see a problem

@cursedcliff7562 3 жыл бұрын

@@undersiege3402 dont worry, even if a problem arises you wont see it, or atleast you wont see it for long :)

@anubisvex3309 3 жыл бұрын

And use gloves unless you want cancer on your hands

@rolandasa.1112 3 жыл бұрын

Video idea: make an RC plane that uses the HV ion wind as the thrust source to fly it.

@nic.h 3 жыл бұрын

HV power sources tend to be heavy so probably have to be tethered to a power supply

@MrShuer11 2 жыл бұрын

the only channel from the entire youtube where he put a lot of work and effort without any brain just to acomplish nothing. Only integza can create turbo jet engines out of plastic and conclusion that something didn't worked as expected

@daniellewest265 2 жыл бұрын

Oh! A good idea for an episode is if you can make a small engine run on water!. Your channel has brought me great joy.

@hanleypc 3 жыл бұрын

You REALLY need some heat resistant gloves for welding!

@evilplaguedoctor5158 3 жыл бұрын

Awe common. Why deprive a person from severe sunburns? :p

@1944GPW 3 жыл бұрын

Standing inline with the compressor and NOT wearing safety goggles. You're a braver man than I am.

@oscar-dl7hv 2 жыл бұрын

Brave or stupid?

@HDMediaUK 2 жыл бұрын

@@oscar-dl7hv He's still alive so we're going with brave for now

@thegreenxeno9430 Жыл бұрын

@@HDMediaUK Safety third

@ciprianherea9250 8 ай бұрын

The excitement over the lubricant is contagious

@davidinmossy Жыл бұрын

Noice !! plus good to see you helping others that don't have the funds to do such projects.

@alexandredevert4935 3 жыл бұрын

The sheer "I stick to it with whatever tools I can afford" is remarkable and inspiring. If you keep welding, please use clothes designed for that tho, say some cotton suit. Synthetic fibers are a recipe for horrible skin burns.

@JackClayton123 3 жыл бұрын

My grandfather was an engineer and used to say proper lubrication was the key to running all machines. And he only has 6 kids. I like the shout out to Colin!

@timgrant8729 Жыл бұрын

This is my new favorite channel !

@phillipsexton-zz9yb 7 ай бұрын

Great job bro - you did it !!

@Tokii141 3 жыл бұрын

Using the syringe needles as fuel injection was genius!

@PLAYERSLAYER_22 3 жыл бұрын

*fuel distribution*

@njones420 3 жыл бұрын

that's in the original KJ-66 plans (which I'm pretty sure all these parts are 3D printed from) I'll finish mine one day...

@thatradioguy6839 3 жыл бұрын

AvE has a saying... A grinder and paint make me the welder i ain't! :D

@beanieteamie7435 3 жыл бұрын

This

@smokenchoken1736 3 жыл бұрын

Good ol uncle bumblefu**

@nielscremer599 3 жыл бұрын

That ain't just AvE. Just about everyone uses that now

@flame774 2 жыл бұрын

thats one of the coolest things ive ever seen dude, nice

@oak_meadow9533 5 ай бұрын

I love the idea of forming parts with printed molds; once again you have conquered the limitations of your tools! Not only are you smart, but you are cute too!😊😊😊

@mrmunchkin2181 3 жыл бұрын

Now that tou have made a jet engine, you should make a turboshaft engine to power a propeller. Should be relatively easy seeing as you have now made the jet engine.

@benji376 3 жыл бұрын

*Is sponsored by a learning platform *proceeds to use KZfaq to learn to weld for the project

@klausbrinck2137 3 жыл бұрын

The result implies, he should have better used a learning platform...

@PLAYERSLAYER_22 3 жыл бұрын

you sat through that? his welds looked like he did not try to play with the feedrate or amperage whatsoever. like no shit they all splattered and boiled.

@benji376 3 жыл бұрын

@@PLAYERSLAYER_22 honestly I’m a little disappointed compared to the production quality of the rest of his builds

@iainwalker8615 2 жыл бұрын

Fun fact: My great great grandfather swept the floor of the Wright brothers’ shop for a job. You can tell me I’m lying if you want to but in the end I’m the one who’s great great grandfather worked for the Wright brothers.

@carlwheeler5789 2 жыл бұрын

Hey integza try letting your ceramics pieces air dry for a couple days then throwing them in the oven at 500° for a few hours before the kiln. Slow is smooth in ceramics. Love your videos