D16 ebay Turbo Kit Stock ECU NO TUNE -Revisited 2 years and 815,000 Views Later!

No video

D16 ebay Turbo Kit Stock ECU NO TUNE -Revisited 2 years and 815,000 Views Later!

Рет қаралды 10,457

Күн бұрын

Items Used IN the Builds You see On This Channel Can Be Purchased from
spoolup.com.au...
BIG THANK YOU To The Channel Supporters
RACEWORKS
PROTEX
MTQ TURBO /GARRETT
T7 DESIGNS
COMPLETE AUTOPAINT SPRINGVALE
CHONGDATA
MAXPEEDINGRODS
BURSON AUTO PARTS SPRINGVALE
I Couldn't Do What I Do Without Their Help.
Below are my past & present builds
*1991 Nissan Pulsar N14 SSS- 118kW not raced
*1996 Nissan Silvia S14 200sx -220kW 13.0@109mph
*1990 Nissan Skyline R32 GTR- 350kW 12.0@118mph
*1996 Nissan Skyline R33 GTR- 520kW 11.0@127mph
*2015 Nissan Pulsar C12 SSS- 200kW 14.0@104mph
*1998 Honda Civic EK sedan K24 TURBO SWAPPED 275kW
*2012 Honda Accord Euro K24 CU2 128kW
*2003 Honda Accord Euro CL9 Racecar 151kW
*1987 Holden VL Commodore Turbo Restoration 250kW @15psi
*2000 Honda Civic EK D16 N/A SOLD
*1995 Honda Civic EK4 B16A VTEC SOLD
*Toyota SW20 MR2 SOLD
*1990 BMW E30 318 M54B30 SWAP

Пікірлер: 94

@timtrial3971 11 ай бұрын

That wastegate pipe design seems to be inspired by American tuners who exhaust it out the bonnet. That won't impress the police in New Zealand I'm afraid. A lot of mods you see in the US wouldn't be allowed on the roads here. Far better to follow local channels or ones like yours for sensible inspiration

@TURBOTRISTO 11 ай бұрын

thanks heaps for watching Tim! I appreciate it

@5GmotorSPORTS 11 ай бұрын

Part of America I'm from they pull you over for EVERYTHING! And California is just as bad! Besides that the best way to run a turbo is to make it as stealthy as possible 😂

@timtrial3971 11 ай бұрын

@M_eg_an_performance best thing to do is check your local regulations before you spend money or start chopping things up.

@OfficialMenOfCulture 11 ай бұрын

very informative, straight to the point. Well done

@TURBOTRISTO 11 ай бұрын

Cheers my hack is working

@TheShifftii 10 ай бұрын

Man this is defs a throw back, finally catching up on your videos

@TURBOTRISTO 10 ай бұрын

Thanks legend

@nathanlevander1867 11 ай бұрын

Morning coffee and T-man talking about turboing a D series, jus lovely

@TURBOTRISTO 11 ай бұрын

💜🩷🩵🩵💚💛

@ST1L0KS 4 ай бұрын

Best content brother thank you for your time and inspiration.

@TURBOTRISTO 4 ай бұрын

Thank you for watching bro

@ST1L0KS 4 ай бұрын

@@TURBOTRISTO your videos really helped me out with my project thank you again for the finest instructional tutorials that you have helped another non-Mechanic get it done big shot out to you brother keep on that grind

@TURBOTRISTO 4 ай бұрын

thanks man im glad i inspired someone

@GlassWerx 11 ай бұрын

Been wondering bout how well this held up. Haven't been gettn notifications from your channel some reason lately. Glad to see your doin well.

@TURBOTRISTO 11 ай бұрын

Better turn on the bell man

@GlassWerx 11 ай бұрын

@@TURBOTRISTO o it's been on. One of the few channels iv got it on for actually. Idk what's up with KZfaq lately

@lostkauz83 11 ай бұрын

Good on you bro for talking about those dumb reaction vids, in 200% agreement 👊🏻. Congrats on your success my friend !!

@TURBOTRISTO 11 ай бұрын

Thank you legend

@D3Media1234 11 ай бұрын

The Og fast and furious civics and Vl's was what got me into the car scene lol.... nice vid only thing missing is a Denver nuggets hat and jumper heheh

@TURBOTRISTO 11 ай бұрын

Haha thanks for watching brother

@shonez5527 9 ай бұрын

Hey just so u know, at the beginning of the video I say obviously this video is way to long. It was absolutely not too long it was just long enough to have all the details that make it easy to understand. And it is your most viewed video so I would say if anything u need more videos that style. Great videos either way keep doing what ur doing

@TURBOTRISTO 9 ай бұрын

thanks Shonez, I appreciate the feed back and you are 100% correct

@igvtec 11 ай бұрын

B18c2 turbo build all the way.💪

@TURBOTRISTO 11 ай бұрын

Just waiting on parts haha

@adieselcotton 11 ай бұрын

The old school Phoenix Suns Logo was the best.

@TURBOTRISTO 11 ай бұрын

100!!!!!!!

@TURBOTRISTO 11 ай бұрын

The old NBA was the best hahaha

@angry9901 11 ай бұрын

Nice one Tritto, I hope this vid gets as many views as the original one.😁

@TURBOTRISTO 11 ай бұрын

Me too haha

@ridinglacs 11 ай бұрын

Hooray for phx suns

@TURBOTRISTO 11 ай бұрын

Hek yeah brother

@skate166 5 ай бұрын

can you do a d17 a2 turbo build?

@TURBOTRISTO 5 ай бұрын

I would love to I. The future for sure

@hoofshealz 11 ай бұрын

Hey Triston, I enjoyed the frank honesty of the original, good to see you are still slinging spanners. I am in Brisbane, do you have any idea where to get a good D16? planning a D swap for my classic mini.

@TURBOTRISTO 11 ай бұрын

I have a fully forged d16 turbo ready to go all complete ready to go it’s never been run

@ENTshortsdaily 11 ай бұрын

I put an eBay turbo kit on my d16y8 but I’ve never had an issue with the fitting from eBay

@TURBOTRISTO 11 ай бұрын

That’s awesome which kit did you use

@victorwilks88 11 ай бұрын

spool up!!!

@TURBOTRISTO 11 ай бұрын

Hek yeah

@rronav 8 ай бұрын

My only concern is if you can use the air conditioning, since most turbo kits do not allow you to do so, I ask because I want to build a D16 turbo for my daily drive, of course until I buy the honda in a couple of months, I only have that concern

@TURBOTRISTO 8 ай бұрын

Yeah it won’t work unless you spend more than what the car and turbo kit is worth to make it fit

@ragewolf1240 7 ай бұрын

Rear mounted turbo is how to keep AC

@Jos-mx8nr 11 ай бұрын

Hey mate bad ass content 👍 Have ever thought about doing any 90's mustang 2.3 liter engine?

@TURBOTRISTO 11 ай бұрын

We never got them Here man and the ones that made it here are extremely expensive, but yes I have and I would love to

@Jos-mx8nr 11 ай бұрын

@TURBOTRISTO over here in USA they're getting pretty expensive as well, specially coupes, but it would be cool if you ever come across one of them, there's almost nobody, doing videos of a 4 cylinder mustang n/a to turbo, because everybody wants to go v8, and if they do a turbo, they just do a turbo engine swap from a turbo mustang svo or any other turbo car

@nickclashez 9 ай бұрын

Yeah buddy love d16 content doing one on my channel small turbo set up 48/49

@TURBOTRISTO 9 ай бұрын

Nice man I’ll check it out,

@nickclashez 9 ай бұрын

@@TURBOTRISTO keep up the hard work bud it’ll pay off signing in from the states 🇺🇸

@TURBOTRISTO 9 ай бұрын

i would love to get more into the usa market- more honda builds to come

@berylzhou7236 11 ай бұрын

good video！

@TURBOTRISTO 11 ай бұрын

Thank you

@KKDriver 11 ай бұрын

I’ve been wondering how it had held up… guess I finally get to see

@TURBOTRISTO 11 ай бұрын

All still going strong surprisingly to me

@KKDriver 11 ай бұрын

@@TURBOTRISTOI bet if I tried this I’d blow the motor same day🤣

@TURBOTRISTO 11 ай бұрын

nah they love it

@5GmotorSPORTS 11 ай бұрын

Hah they sent you the intercooler kit for intake side on RH side that's why it was off by a mile... they needed to send you intake LH side

@TURBOTRISTO 11 ай бұрын

Yep, it was janky

@666.32 Ай бұрын

Hi mate , i have turboed a citroen saxo vts 16v ,its on stock ecu right now i need to make a custom map what you recommend me

@666.32 Ай бұрын

I send you photos and all if you can help with anything all help is good

@TURBOTRISTO Ай бұрын

I RECOMEND GOING TO A TUNING SHOP AND BUYING A STANDALONE ECU AND LKETTING THEM FIGURE IT OUT

@666.32 Ай бұрын

@@TURBOTRISTO yeah i need to bring it to someone that knows wasap jejj

@ilikecereal4033 11 ай бұрын

is it even worth buying one of these kits, or should you just build your own piece by piece

@igvtec 11 ай бұрын

In my personal opinion, I wouldn't waste my time or money on one of these kits. Realistically if you want to turbo your motor, don't cheap out get quality parts. Save yourself the time and headache, and do it right the first time.

@TURBOTRISTO 11 ай бұрын

@@igvtec exactly

@JackDerichsweiler 6 ай бұрын

Where can I find forged 134mm rods for a d15b7, the d16 rods are longer and I can’t run them without ruining a thicker headgasket. I cannot find rods for my d15 please help

@TURBOTRISTO 6 ай бұрын

Try maxpeeding rods

@goodmatchplay1372 10 ай бұрын

Hey, I have an issue with the Skunk2 70mm for my D serie I have set over all the stock sensors to it and I installed it but for some reason it keep jumping up and down revs from 1000rpm to 1500rpm consistently. I would appreciate any help.

@TURBOTRISTO 10 ай бұрын

If it’s jumping then it could only be a vacuum leak or an iacv leak try unplugging the iacv and see if that stops it

@zeriel0009 5 ай бұрын

You didnt explain how this is working without any tuning!

@TURBOTRISTO 5 ай бұрын

Check the OG video :)

@patricktaing7979 11 ай бұрын

is there going to be a spool up t shirt anytime soon ?

@TURBOTRISTO 11 ай бұрын

Should be soon

@halalautoworks 6 ай бұрын

Bro, i Planned to turbo my suzuki ignis 1.2 litre. Only 4 or 5 psi, will be tuned. Can I tune w/o upgrading injector or fuel pump?

@TURBOTRISTO 6 ай бұрын

More air requires more fuel, you much do a fuel pump and fuel pressure regulator and injectors, swift 1.6 or baleno 1.8 injectors might bolt in that should be enough

@halalautoworks 6 ай бұрын

Even its just 4 psi? Im budget limited. Btw the injectors i have is the same as suzuki ertiga 1.5 litre

@TURBOTRISTO 6 ай бұрын

if you are on a budget you cant afford to do it wrong and blow it up,

@halalautoworks 6 ай бұрын

Well my tuner said, the injector can be maximized with injector module to accomodate extra air. So im a bit confused, wheter its true or not

@halalautoworks 3 ай бұрын

ive turboed mine, and no need to change injectors, just maximizing injector

@emsea7279 8 ай бұрын

Awesome did you change the injectors what size what fuel pressure

@emsea7279 8 ай бұрын

Ok stock 240 awesome

@TURBOTRISTO 7 ай бұрын

I didn't

@cosmicpanther63 10 ай бұрын

Is this a Honda only thing? Or can I do this to any car?

@TURBOTRISTO 10 ай бұрын

You can do it to any car, all the principles are the same, just follow the correct recipe and don’t cut corners on the important stuff like boost management fuel management and engine management the rest of the parts can be cheap and nasty and you will still get decent increases in performance but as usual if you use quality ingredients it will make a better recipe

@cosmicpanther63 10 ай бұрын

@@TURBOTRISTO bigger injectors for sure, fuel pump perhaps. Def an AFR to know if I'm leaning out too much. Thats the plan