I've done that before, where I forgot to install the fire ring. Now I have a 709 whp EJ8 Civic coupe with a fully built LSVTEC (B18B1 bottom end with CP pistons and Eagle rods) with a Garrett GT3582R turbo.

Top effort for owning up to your errors. Lots of others would just blame the cheap gear

Great show man you are very knowledgeable about the vehicles I saw of the pond this channel today. God bless you my brother keep them coming.

Maxpeedingrods coil overs are fantastic i have 2 civics and they both are running their coilovers. Super impressed with the drivablilty of them and the comfort at a super low price

Absolutely top effort mate. The previous commenter was absolutely right. So many guys would blame the cheap gear! You're definitely a motivated bloke. I'll be keeping an eye on you mate!lol. Another great vid!

Hey bro. Just started watching this part 2 and yup glad u figured it out.

I like how ballzy this channel is. Thank you homie

5:57 Good 2 fast 2 furious reference! 😂

Good to see an actual Ozzie finally doing one of these, keep up the great work man

I really like his paint job on the car! It looks nice and the little painting under the hood is kind of cool too lol

Weeew im here to see some d series go pew pew sututututu

Subscribed mate, great videos

I’m here for it!!

Awesome video. Good work.

what a great video very informative

Keep the videos coming 💥🔥

glad its going strong

Thanks 😊 very much i an will now to buy ebay turbo kit for my integra😊

I'm loving this build. I'm building a turbo kit for my car(g37/370GT coupe) and so far the only issue I'm having is realizing the tuning software is INCREDIBLY expensive for what it offers.

Rocking the boostedboizzzzzz gear!

Subbed, great videos

Damn those wuhan whistle rockets lol

Use hair spray on intercooler pipe couplers. They slide on slick and easy but when it dries they aren't going anywhere

This has been a cool video I have the American d16y7 98 sedan and kinda wanna do something like this or an amr500 supercharger just a little more power but not stupid money

Nice, good diy info

Awesome. Your channel rocks man!

Glad to help mate 🏁

Hey man great Vedios✌️

You could tune it with hts for next to nothing... we use to run missing links or check valves to bleed of boost b4 the map sensor but it didn't fix the lean a/f

Also get rid of the gasket for the Watergate. Just use a piece of sand paper and sand both surfaces and put the fire ring right to the manifold.

Hose clamp a piece of flex pipe on the end of the dump pipe

Aye you live in melb. somewhere in the south east. Noble park or clayton area maybe XD. Keen to see your civic around.

Another boost leak is your catch can setup. I promise you that stock pcv isn't closed all the way and your putting boost into the valve cover and out the port of that red catch can. Get rid of that setup. Ditch the pcv. Plug the hole on the manifold and put a hose from the valve cover to the firewall. Just a tip. Not ragging on ya.

I’m hoping you can answer a question for me. I manage a nonprofit feeding program in Mindanao Philippines been here about 7 years now. I’m from the US.I recently purchased a Mitsubishi Adventure that has a normally aspirated 4D56 diesel engine. I love this AUV so much.They don’t have these in the states.I live in a very remote mountainous area and haul lots of supplies all over the country.Ive made lots of modifications to it in order to make life easier.Installed a heavy duty clutch and shocks as well as lifting it a few inches.My only problem with the car is lack of power.I know that the engine internals are different on the normally aspirated 4D56’s than the turbo models but I’ve been told that I can install a turbo kit and recalibrate the fuel pump and have no worries about blowing the engine.Do you think it’s possible to do this?I have a small budget and can’t afford to replace the engine if it blows so I’m pretty nervous.I really need the extra power but can live with it as is if I have to.Anyway I would love to hear your thoughts. Thanks in advance for your feedback

Btw honestly I wouldnt use a gasket on the waistgate. Fire ring seals it just fine.

The boost control line goes to the top of the gate an you have vacuum from turbo for the bottom of the gate

I normally don't sub, but you cool bro. I had a turbo charged red headed step child b13 sentra (1.6L 5 speed =/) RIP it died. Now I'm gonna boost my CR2 accord 6 speed!

So if I put that turbo kit in my D16Y8, I would just need to put better injectors, fuel pump, and a good tune to made it run smooth? (With like 6-8 psi)

Last one. Move the vacuum source for your blow off valve to the manifold spot that I told you to take the pcv from. That wastegate spot you have it now will not work.

9:23 so that's why they're called "blow off" valve :D

I might boost my d17a1 this way for fun

Throw some mounts and arps in it. then all ya need is a tune.

how much horsepower do you think a D series transmission from a 96' Del Sol CRX can handle? (1.6l SOHC) 5spd.

Hey mate just finish watching this video and couldn't help but notice you're in the keysy area? Cause I'm looking to get a civic next year, do you do it for friends only or for customers?

I would assume a popular video would be like, what is the MINIMUM, to make turbo woosh sounds and stuff… it has to LOOK the part too, have a turbo, all the nice pipes, but, not necessarily making mad power…. Is there a “stand alone” system that could(i’m spitballing here) take a reading at the intake and exhaust, and make fuel adjustments, itself, without the original computer really even noticing? As boost goes up, you program the injector to add fuel and maintain the right air fuel mix..?

Do I need to change rods and piston to turbo charge a 1nzfe engine in Toyota vitz

🔥🔥🔥

So how exactly do you change the ECU, I can't seem to find any solid info on how to do it

I want turbo noises!😃👌

Can't believe u put ejecto seato cuz 😵😂😂

Why is the waste gate only on piston 4 on the manifold?

Turbotristan what wheels are on the spool up car

Hi man can you please help to put a new turbo on my accord 2.4 cp 2010. I’m from Melbourne

He blew off his blow off valve!

Hola, qué es el anillo de fuego?

mate how did you turn it up when you did not get out of the car

Customer should of just done it himself as he had to fix the problems anyway. And heads up fuel pressure on rising rate is set with vaccume blocked to fpr.

Garage door but no wall haha

Does anyone know. What can boost cut at 3000 trpm?

mate near the end you talk about doing what u can with the money you have and have fun, This is what i try to explain when im talking about dropping a 7.3L Godzilla into a AU Falcon yeah the motors $15600 for a long crate engine but to me that a bargian hahahahaha, regardless if you can afford Very Budget, Mid End, High end, extremely high end it all circles back around to one MAIN thing.... Have you had fun? and if you can say yes thats all that matters, (also build a car for you, nobody else, do what YOU want) Hell i wanted to turbo my old daily 121 just because it would be ridiculous

Any parts for sale y8 head?

Ima put a $900 ebay kit on my k24

how much was it for the whole kit

Just got to the part where u raised the boost. U have no boost gauge, u shouldn’t touch boost until u have a gauge.

I have a areodeck 1.6 vetec I have to stop watching this 🤣 or I may be tempted

You must not know about maxspeeding rods

Shit so I could possibly do this and make it work but I don’t really want to lose ac and heaters 😂

He looks like ben afflik, agree?

How boost terboo

You live in chingvale

Inspires me to turbo my 97 shitbox camry... I daily a hellcat

not tryna bash but i think its completely useless to put a turbo kit just to get less than 5psi.... couple more steps get it tuned and get your moneys worth!

you arent splitting atoms here were ran stock ecu on 12-15 lbs using slightly bigger injectors and a vortech fmu...thats it

Why do you speak with an upward affliction? ?