At Dollar Tree they have cork sheets with adhesive backing. That would be good for the back instead of the glue.

I've used napkins, wrapping paper. Never used resin. Just sprayed with clear sealer. Always used felt on the bottom so it wouldn't mark up table top or countertops.

That half box of white 4x4 tiles in my garage just became useful again. Great diy, can't wait to try it!

Thank you so much for going nice and slow for us seniors 💙 💕 💖

What a neat idea! This way you can make coasters to match your curtains!

This tile to coaster idea is a REALLY cute one...I especially loved the use of fabric for the design, and the added step of the resin seal, which most people probably wouldn't have bothered with, unless they were already familiar with mod podge... Honestly, the only tip that I could offer would be for the backings, and I realize that this is completely unsolicited advice, but it comes from a TON of first hand experience in trial and error, so hopefully it saves someone out there the extra time and frustration that I had to endure while learning the hard way... Sure, hot glue dots will work fairly well as "legs" for a little while, but they'll eventually come loose after a few mugs of hot coffee (if that), and the fabric will also be at risk of peeling up around the back edges, potentially causing the entire front to come loose... Basically, my point is this...If you really want these to last and/or you're planning to sell something similar, it would definitely be beneficial to use a coat of resin on the back as well, with rubber dots as "legs" instead...They're inexpensive, and can be found at any craft store, in a range of colors including clear...They can easily be added into the resin itself during the setting process (after removing all bubbles), and once it's finished hardening they'll be FAR less likely to come loose, or melt entirely, unlike the hot glue version... Personally, if I were planning to mass produce and sell something similar, give them as gifts, or even just to use them in my own home, I'd probably add color to the resin on the back side, that either matched or complimented the color in the fabric's design...This step would insure that the edges of the fabric were sealed tightly on all sides (with the added benefit of making the entire coaster water tight for easy cleanup and maintenance) while also concealing the area where the fabric was added on, as well as the rough, unfinished texture on the back of the tile...You can do this using anything from resin dyes or pigments, and mica powders, to even a small amount of acrylic paint...It all just depends on the overall look that you're going for...Hopefully these tips are helpful to someone out there...😊

Excellent instructions, easy to follow, and thank you for not showing repetitive steps.

Great idea and thanks for not endlessly showing up repetitive steps.

Simply beautiful. What a great idea and I love your choice of fabric.

I've never worked with resin but always wanted to. That is a gorgeous one of a kind set of coasters that given as a gift to the right person could have extreme sentimental value.

Very pretty! Would never have thought to use cloth. This I have to do!!

Brilliant idea. 😆 I work in a tile shop and we are selling larger hexagon tiles aswell as small ones. I will get some tomorrow. But will use clear lacquer on top instead of resin. Thanks anyway.

Beautiful, Thank you for sharing have a blessed day stay safe and healthy. 🙏❤🙏❤

I love this craft! Thank you for taking the time for showing us how to take inexpensive tile and extra fabric to create coasters. ❤ 🎨 ❤ For those who have shirts that np longer fit, or that have a rip, this could be a cool way to up-cycle a shirt. Again, thank you!! 😊

If you count materials and TIME, it's a spendy set of coasters. But, if you had fun doing it, more power to you.

Very Pretty and Nice!! 💕Tiles can be used for sooo many wonderful ideas!!

Those are gorgeous!!! Love the idea!!

I like the choice of colors! Would be perfect for my coffee table!

YOU COULD ALSO USE FELT. CAN ALSO USE THE FLAT CRYSTAL/ MARBLE STONES GLUE TO TILE

Lovely, but a lot of work for a few coasters!

You could also custom design accent tiles in your bathroom or kitchen.

Love the hex shape of the tiles and nice choice of fabric...

Yeah, I have leftover tiles laying around everywhere...I've been wondering what to do with the pesky things...

So pretty. Thank you!

They turned out lovely Lisa. I was happily surprised, never having seen anything like that. Thanks.

You are a wonderful teacher and you make the steps to completion of the project easy to understand. 🌺

Thank you Lisa, I always love your tricks & tips. 💛🌻

Very well done video! Thank You.

I like that, I have some scrap liberty fabric that would go in my newly decorated kitchen 😂 I am laughing cos I have started the big home makeover with a LOT of inspiration from Hometalk, Thank you all so much 💖🌸

How do I stop the coffee mug from sticking to the tile. I'm having that problem with all my resin coasters. You did a great job.

Ingenious..and beautiful!

Omg great great idea!!!i do have some fabric that I love but too small for a napkin.. I will definitely try it!! Thank you for your video!!

Unimaginative. Coasters have been done to death on these DIY videos.

I just have to say these fabric coaster's with resin is such a great idea, the shape of the tiles makes them extra special, thank you for sharing

Very nice ....I have square tiles will definitely give this a try

Lovely, great idea and will last for ever

Beautiful coasters, and very do-able! 🥛💜🧁

What a sweet looking project! I’m impressed with the tactful suggestion to use coasters by making some!

Loved I will definitely try it

Awesome idea and tutorial! Thanks!

Love that idea. Thanks for sharing 🙏🏻

All that trouble for coasters? I pass

Gorgeous! Great idea for my IKEA tea towel🥰

Smart and pretty. 💙💙💙

With matching trivet! 😍

Beautiful! 😍

Thanks for sharing this with us here on KZfaq! This is a fabulous way to make all sorts of crafts. Thanks again!

I really like this craft idea. Thank you for sharing 🌻

For what you have spent you can by them for a couple of quid

I love the pattern and colors in the tiles....

Fantastic idea, they look stunning!

Very pretty, but not practical for iced cold drinks, as the glasses sweat. I would so hang these on my wall in groupings!

I just love all the ideas your Home Talk channel comes up with, love these coasters. I would use felt or cork to make the feet, I like the idea of the cork adhesive backing instead of the glue.

Love this idea, thanks for sharing your creativity!!!

I love your idea! I have the material I want to use already! Thank you! 😍👏💡😍👏💖💖

Wow, absolutely beautiful work 😍

So beautiful tx for your tutorial 👍👍😁

Great project!

Those are beautiful! Thank you so much

It's always good to add the modge podge a little on the over lap. It will make it easier to cut when dried.

Would also be a nice gift if you added an additional large tile as a heat resistant trivet .

I absolutely love your beautiful home decor and I will do this for my home in a few days when I get some of the resin. :)

I never thought that you could use hodgepodge on fabric. Great idea! I have curtains like yours but mine are black and cream. I have a sheet in the same fabric that I can use. Thanks for the 💡!

Thanks for sharing awesome diy...

Super cool!

Lovely idea ❤

I actually thought you were going to use as a backsplash, who knew? Either way it would have been nice. Thanks for sharing.

Very Very pretty.wonderful idea.thank you for sharing.

Beautiful

Should have glues cork or felt on the backs.

Great gift idea

What a great tutorial. I would like more like this please

Wonderful idea.

What kind of mod podge? Gloss flat????

I made refrigerator magnets with tile and all you need is magnets hot glue any beautiful letters , Hobby lobby has really pretty small letters and also have really pretty small flowers in bags by letters that make beautiful refrigerator magnets.

Great idea🙌

Clever idea!

I like this. I'll put this on my list.

Hi Lisa! What a great idea!.I have some square pieces that are too small for coasters but I have some larger squares and I was thinking your idea might work for trivits but I'm not sure if that's a good idea either. I'm sure I'll figure something out lol! Thanks for sharing such a neat idea!

Awesome

A thrift store by me, one that sells donated items, always has packs of ceramic or stone coasters for .25 to .75 and this would be a great way to switch them up! Thanks. 🙂

Man! I made these with my son back in the 80’s! Was I an InfluenceR?

Awesome, unique 💟

Very pretty❤️

I have a better idea. Cloth, hot glue, Scotchgard spray... done. Ta-dah! EZ-PZ! Less time, effort and money. Scotchgard is much better than decoupage-glue-soaked fabric. If you want a really good tough coat, get the Outdoor Scotchgard, the one for tents, umbrellas, and patio furniture.

That's A great idea 💡 👍

You likely got it @ Goodwill, but I liked the table runner better

Thar is genius. Tanks for this great idea.😘

Great idea

Good job!

Impressive! 👏🏻😁

Very nice!

Very beautiful

FYI taping the back with painter's tape before using the resin will eliminate the resin drips. cut the excess off of course before hand. Peel the tape off after dry and the drips come off with the tape making a smoother back for cork or legs.

Cute idea

You can’t use those as coasters. The minute your drink starts to sweat it will slide right off the coaster. What’s the solution?

super cute

Great 👍👌👍👌👍

Perhaps Low Odor Polycrylic, cheaper too. At Walmart😁Great job on tiles! Backsplash or counter... here i come!

I like it! I painted my mailbox 📬 and want to decorate it with Beach Motifs. Can resin be used outside? Will it crack in the heat of the Sun?