Tutorial #2: PVC Lapstand for Hoops and Smalls

Рет қаралды 1,663

5 жыл бұрын

Materials:
6 x 90 degree elbow joins
6 x T joins
2 x caps
1.5cm PVC Pipe cut into the following lengths:
1 x 39 cm
2 x 26 cm
4 x 15 cm
2 x 11 cm
1 x 9 cm
2 x 5 cm
2 x 4 cm
2 x 3 cm
Optional : PVC Glue for joints, epoxy glue to attach magnets

Пікірлер: 26

@boogiestitcher 3 жыл бұрын

New subscriber here! This is AMAZING 👏 Thank you for taking the time to make this video! Do you have a tutorial on how you use this frame as your scroll frame?

@MichStitch 3 жыл бұрын

Hello! thanks for your comment :) I just sit my hoop on the two knobs and let it rest against the top. I've since found it works a lot better if you use the magnetic cable ties to hold it to the frame (by wrapping around the side bars then onto your fabric) because just the hoop itself is a bit light, so when you're trying to use the frame it lifts off a bit too easily... does that make sense? :D feel free to DM me on my instagram @mich_stitch_1 and I can send you some photos if you'd like M

@minniegray-allxxs9332 5 жыл бұрын

I love it! I have all of the pieces, going right now to see if I can put one together. Great job!

@MichStitch 5 жыл бұрын

I am so excited to see what your finished frame looks like! Good luck with the metric measurements 😊😊😊♥️

@patchy_pony_stitcher 5 жыл бұрын

I’m running to Bunnings tomorrow!!!!! That’s awesome

@MichStitch 5 жыл бұрын

Yaassss! Make sure you share with me how you went!!

@stitchn304patience9 5 жыл бұрын

Thanks so much luv for taking the time to make this an share your creation

@MichStitch 5 жыл бұрын

Any time! Let me know if you make one, and how you go - was it okay? I was worried it was all too close.

@stitchn304patience9 5 жыл бұрын

@@MichStitch I will hun an the video was fine

@MichStitch 5 жыл бұрын

Thanks for letting me know! Give me an update if you end up making it!!

@jenniferradcliff8910 4 жыл бұрын

I'm going to try to figure out the imperial conversions and make one of these. Thank you!

@MichStitch 4 жыл бұрын

there are lots of conversion tools online :) hopefully it won't be too much work! Let me know how you get on! Cheerio, M

@jenniferradcliff8910 4 жыл бұрын

Mich Stitch And a success! I even used the metric measurements. 🙃

@MichStitch 4 жыл бұрын

Jennifer Radcliff yayyyyy well done you!! 😍😍😍 use it for a while then decide which joints to glue! Mine’s just gone in my bag for my Spain trip!!

@jenniferradcliff8910 4 жыл бұрын

Mich Stitch I will. Now I just have to practice not wrapping my thread around the frame.

@TopKnotStitcher 5 жыл бұрын

You are too clever!

@MichStitch 5 жыл бұрын

Haha I just like to make ‘stuff’. I think I was an engineer in a previous life 😁😉

@debbiearmstrong1302 3 жыл бұрын

How big of hoop fits this frame? thanks.

@kathybubier8061 11 ай бұрын

could you please send me the measurements and the materials for the scroll frame one you made please and ty

@michellemazlin1014 11 ай бұрын

Hey Kathy! the materials and measurements are all in the comments below the video :) Enjoy!

@katebrown3291 5 жыл бұрын

Mich - thanks for your excellent and inspirational tutorial. I like the”gong” pattern- is it for Mittagong? Wish I could be there ....

@MichStitch 5 жыл бұрын

Hello Kate! It absolutely is the Mittagong model I’m stitching 😊😊 well spotted! Maybe next year??

@flowerandlinen 5 жыл бұрын

So clever. I think you need to patent it!

@MichStitch 5 жыл бұрын

Thanks Susie! But I think I'd rather share the love with my stitchy friends! :) Let me know if you make one, and how you go!

@flowerandlinen 5 жыл бұрын

@@MichStitch on my one day list - I actually work for a company that manufactures PVC pipe but it's bright orange. I'll take more notice next time I'm out at the factory

@MichStitch 5 жыл бұрын

Ohh orange is my favourite colour! I would love to see that!!