Рет қаралды 6,522
Showing how I put together my PVC lap stand to hold my scroll frames.
Materials:
4 x 1 metre lengths of 15 millimetre diameter PVC plumbers pipe
10 x 90 degree joints
2 x 45 degree joints
2 x T joins
2 x Caps
PVC Glue
60 cm x 60 cm piece of patterned contact
Lengths for my stand (EXCLUDING excess to fit into joints which was 1.5 cm per joint):
4 x 1 cm (tiny joins)
2 x 41.5 cm (horizontal lengths across knees and top of frame)
2 x 13.5 cm (lengths to down from the knee horizontal)
4 x 30 cm (beside legs and top of T intersection)
2 x 8 cm (lengths to go up at the end of the lengths beside legs)
2 x 4.5 cm (first bit going up at 45 degrees - bottom of T intersection)
Make sure you give it a test drive before gluing to ensure all the heights and lengths are good for you.
Patterned contact from www.chicshelfpaper.com