Tutorial | Hotbed Leveling of Sidewinder X4 Pro

Рет қаралды 2,913

5 ай бұрын

Hi all, here is the video to show how to level the hotbed of Sidewinder X4 Pro. Hope this can be helpful for you.
If you have any other questions about our printer, please feel free to get in touch with our support team via support@artillery3d.com.
Many thanks for your watching!
Visit Artillery official store: bit.ly/46s2X24
Follow our other social media:
Facebook: / artillery3d
Instagram: / artillery3dofficial
TikTok: / artillery3dofficial
Twitter: / 3dartillery
Review bundles on Sidewinder X4 Plus: linktr.ee/artilleryx4plusreview

Пікірлер: 13

@goes2112 5 ай бұрын

This is very helpful but requiring pushing Zoffset=0 and then separately z=0 and only THEN doing the actual leveling is a very bad design. If you go into auto bed leveling mode, it should give much clearer prompts and explain the steps that need to be done. Also if you select English as the language, seeing Chinese writing on the screen while it seems to be waiting for long periods is disconcerting. Hopefully these can be cleaned up in future firmware because the printer seems high quality otherwise. I hope this finally makes my new printer work. Very frustrating to wait for months to get something and when it arrives, it does not work because it keeps driving the print head into the bed.

@goes2112 5 ай бұрын

This immediately fixed my problems and it started printing. Thank you for posting this.

@Perkeletricksterservantofrher 4 ай бұрын

it says the bed and hotend is heating wait for bed mesh leveling.

@jozsefienciu2325 5 ай бұрын

SOME USEFULL VIDEOS FOR Sidewinder X3 Pro PRINTER

@Artillery3D 5 ай бұрын

Hi, we're working on it and update them as soon as possible.

@user-el4uf4ik1m 5 ай бұрын

I had a few nozzle crashes at the beginning ;-(( but NO Damage, it's a strong printer. There is no useful step by step explantion for die most important first z-axis calibration, the calibration infos in the manual are not for Noobs like me ;-). This Video was too late for me. Hope it helps other users. Its my 2. Printer (Ender 3 pro) and a very fine quick one, i love it. I enjoy the fast printing and linear rails for x- and y-axis. Klipper is new for me but i enjoy the printinfos and online checks. My Way: go to the MODE auto leveling: adjust the nozzle (0,8-1 mm) over the printbed with UP/Down, then press ZOffset=0, Printer starts again, then the MODE manuell leveling: adjust the 4 Corners (0,8-1 mm) with the bedsrews, check the middle und 4 corners (0,8-1 mm nozzle height above the printbed again, back to the MODE auto leveling Press Z=0, the Printheadnozzle should be 0,8-1mm over the Bed or adjust it with UP/DOWN, und press GO ON (Weiter), Printer starts to check the 81 points. Ready to go. I use Z=0 in the AUTO mode only for checking and adjust the height of the nozzle over the printbed. Is that o.k.?

@Perkeletricksterservantofrher 4 ай бұрын

So basically what they need to do is change the instructions on how it gives out its commands.

@febra7706 4 ай бұрын

I realy hope the process gets updated. there is no way you do it right without watching this video and doing it wrong crashes into the bed at the worst times, there seems to be no sanity checks on the calibtration.

@Artillery3D 4 ай бұрын

Hello. We're sorry about your bad experience. The leveling function is one we'll continue to update and improve.

@SerendipitousProducts 4 ай бұрын

Agreed I still haven’t gotten mine to work and have done it several times. But walk over to my SW-X1 or X2 and haven’t adjusted the need in months and perfect prints every time. Truly frustrating.

@Artillery3D 4 ай бұрын

@@SerendipitousProducts Hi， really sorry about your experience with our printer. The leveling is important and we know that, so we will continue to try to improve it like updating the firmware. If you have problems with the printer, please head over to evnovo.zohodesk.com/portal/en/newticket to submit a ticket. Our support team will get back to you within 48 hours.

@SerendipitousProducts 4 ай бұрын

@@Artillery3D I wouldn’t say it’s a problem, more like part of the barrier to entry. I followed the video again and I am able to print the objects on the included Flash disk. But when I push models over WiFi from the artillery slicer they fail on the bed like the configuration is lost or I get an error the object on the printer screen. I am test printing now so if I get the error I’ll take a shot and send it over.

@Artillery3D 4 ай бұрын

@@SerendipitousProducts We understand it. Our support team may help you to improve the user experience. So please feel free to contact us. Besides, we sincerely invite you to join in our user groups, in which we can have a closer discussion about the printers： facebook.com/groups/artillery3dprinters