Great video however could you make a step by step tutorial video on converting Fg boots to sg would be very helpful for a lot of viewers also I’m not really Sure what mm metal studs to use on front and heal on my Nike mercurial vapor 11.
@czcleats3 жыл бұрын
Thanks mate I will try do this video in future ✌
@rad52723 жыл бұрын
@@czcleats I’ve got my notifications on for later videos then 👍
@stmichaelfc45202 жыл бұрын
11 mm for the fronts 13 mm in the back mate 💯💪🏽
@drewfoster8062 Жыл бұрын
@@stmichaelfc4520 what if i wanna clear people which ones hurt the most?
@danielnizam11473 жыл бұрын
Wondering how can u attach receptacles on one piece upper boot like Vapor 13, Phantom GT, X19 etc as it is hard to reach inside. Will wait for your video for that
@czcleats3 жыл бұрын
Challenge accepted ✌
@dndjdooekebdb33513 жыл бұрын
Do Nike studs fit in the adidas receptors
@h0nz1iik Жыл бұрын
imagine giving someone brexit tackle in these boots ☠️
@SYCOOFFICAL5003 Жыл бұрын
And I need this
@daniyal5174 ай бұрын
JUST BUY A CLEAT WITH STUDS!
@czcleats4 ай бұрын
Yes it is better 👍
@tbn19963 жыл бұрын
what if you cut too much off from the stud so that the receptacles go through?
@czcleats3 жыл бұрын
You must be careful this is one of the most important think. If you cut too much off you can use some backplate ✌
@chamindapalithaekanayake5450 Жыл бұрын
Can you make a list of things that need to do this and post it?
@czcleats Жыл бұрын
You can see at the start of video
@cesc4awesome3 жыл бұрын
bro, can you change FG to AG, and vice versa? I have adidas nemeziz .3 FG
@czcleats3 жыл бұрын
Hi mate, you can do lower studs ✌
@andrepierfly11993 жыл бұрын
Where can I buy those studs receptacles?? I am from Mexico
@czcleats3 жыл бұрын
I bought mine on ebay ✌
@mediaeasieruk5 ай бұрын
ah so thats how you do Studs Conversion / Boot Conversion
@Celavapsina2 жыл бұрын
Hi, I have a question. Would adidas replacement studs fit on Nike boots?
@czcleats2 жыл бұрын
Hi, nope, here is difference
@matiasYarmuch5 ай бұрын
Hey nice video I recently bought some puma future z fg/ag but want to convert them to sg can I do that with adidas studs?
@czcleats5 ай бұрын
Hi, thank you, yes you can to it but I think it is better buy SG boots. I think that studs pressure on your feet is bigger if you convert and studs doesn't fit always perfect
@tbn19963 жыл бұрын
if you buy 10 and 12 mm receptacles but then you were 13 and 15 mm Nike studs will that be OK??
@czcleats3 жыл бұрын
Will be ok
@PhilosopherMindset-on4kk2 ай бұрын
Hey bro can i do this for puma future
@kenditata3 жыл бұрын
Hey bro is it good to play football with cleats without studs on asphalt like on concrete?
@czcleats3 жыл бұрын
Hi mate, I don't know I have never tried
@waj19754 ай бұрын
Wondering what the cost is for all the kit compared to a second hand pair of soft ground boots?
@czcleats4 ай бұрын
Yes, it is for sure better buy a second hand SG boots ✌️
@emanuelmartinez40653 жыл бұрын
I bought the receptacles but I got some studs that didn’t fit, I bought adidas 4x11mm and 8x8 mm metal studs but they didn’t fit. I don’t know much about metal stud sizing and what fits what. Help please 😞
@czcleats3 жыл бұрын
Hi mate, don't worry if you have Adidas receptacles you need nike studs ✌ thats all, good luck👍
@emanuelmartinez40653 жыл бұрын
@@czcleats any size? Thanks for the reply it was big help!
@czcleats3 жыл бұрын
@@emanuelmartinez4065 welcome, yes, you can use 11, 13 or 15 mm ✌
@rianmcnamara1640 Жыл бұрын
Would u be able to link the stud receptacles u used in this vid can’t find them anywhere???
@czcleats Жыл бұрын
Try local football shops or ebay ✌️
@rianmcnamara1640 Жыл бұрын
@@czcleats thanks mate trying to get into the boot buisness 🙏
@substanceftbl Жыл бұрын
Hi great video! What is the name of that type of saw?
@czcleats Жыл бұрын
Hi, thanks mate ✌️ it is better use some electric saw, angle grinder or good drill attachment
@substanceftbl Жыл бұрын
@@czcleats thanks!
@raheemharris552529 күн бұрын
What’s the name of the thing you put inside the boot to turn the studs into ?
@czcleats29 күн бұрын
Studs receptacles ✌️
@rafaf8984 ай бұрын
Got a pair of adidas predators but feel the studs slightly too long to use them on turf ground, do you think cutting like 1/4 of the stuff off would affect the boot in a bad way? I feel that if the studs were shorter they would be more comfortable
@czcleats4 ай бұрын
Hi, which model do you have?
@rafaf8984 ай бұрын
@@czcleats predator elite FG
@czcleats4 ай бұрын
@@rafaf898 I saw couple boots with shorter studs but I think it is better sell youurs and buy AG version, there is more benefits like stronger glue and better structure for AG pitch. If you will cut your studs they will be still really fat for AG
@sttuyishime9066 Жыл бұрын
Hey how do I make sure I drill right in the middle, so the T nut is straight for when I put the stud in?
@czcleats Жыл бұрын
Hi, this is the most difficult part
@sttuyishime9066 Жыл бұрын
@@czcleats how do I do it? I’ve tried twice and failed. You should make a video tutorial for the many people asking
@czcleats Жыл бұрын
@@sttuyishime9066 sorry but I don't know how to help you with this problem. You must have perfect hole and if you will short studs precisely it helps a lot. Good luck.
@henryroberts7011 Жыл бұрын
Hey do you know where i can find stud receptacles or something similar? Can’t find them
@rafal_rybnik Жыл бұрын
@@henryroberts7011 those are t-nuts or tee nuts (en.wikipedia.org/wiki/T-nut). You can buy them in a hardware store. M5 probably.
@SYCOOFFICAL5003 Жыл бұрын
Hello brother I need this metal studs but I don't know he's name
@sammorris10276 ай бұрын
Hi , would m5 tee nut 8mm work or does it have to be 10mm and 12 mm ? Also where would i be able to buy them from? I have 5mm studs but cant find somewhere that sells the inserts
@czcleats6 ай бұрын
Hi, I am not sure about 8 mm. I bought mine on ebay but you can try your local shops
@sammorris10276 ай бұрын
@@czcleats thanks for replying , i tried my local stores and they didn’t seem to have m5 . I tried amazon and ebay but they only seem to have 8mm
@hazimzahir16867 ай бұрын
Hi bro. Can i know stud hole thread size and receptacle please? I just want to customize the receptacle using T-nut, should i buy T-nut size M5 or M6?
@czcleats7 ай бұрын
Hi mate, check my vid and you will see all details ✌️
@yazeednawasreh70837 ай бұрын
Hi, i just got sg boots cuz they are the only ones available atm, is it possible to replace the metal studs with something else so it would be suitable for turf?
@czcleats7 ай бұрын
Hi, it must be really good artificial grass (3. generation) and you can use TPU studs
@yazeednawasreh70837 ай бұрын
@@czcleats alright thanks!
@marwamarwa83384 ай бұрын
comment acheter les pièces ?
@danielprivara60953 жыл бұрын
I cant find the receptacles anywhere can you help me?
@czcleats3 жыл бұрын
Check ebay
@romilica3 жыл бұрын
prodirect
@davidyepez8494 ай бұрын
Can you post the links where you got the stud receptacles? And the metal studs please. Thank you.
@czcleats4 ай бұрын
www.ebay.com/itm/355411795810?mkcid
@davidyepez8494 ай бұрын
Can you also post the link where you got the metal studs please thank you so much !
@czcleats4 ай бұрын
@@davidyepez849 just nike studs www.prodirectsport.com/soccer/p/accessories-12-amo-studs-xl-tube-13-15mm-blue-102353/
@davidyepez8494 ай бұрын
Thanks bro! Just wanted to make sure that the studs fit on the receptacles
@davidyepez8494 ай бұрын
@@czcleatsjust to be clear , those studs screw onto the receptacles correct? Like those studs fit on those receptacles??
@salmanthasleem52643 жыл бұрын
My boot is an adidas traxion, it comes with integrated plastic studs and one of those has broken. Is it possible to replace my studs like in this video?
@czcleats3 жыл бұрын
Hard to say, send me pic how bad is your damage czcleats@gmail.com and I can help you ✌
@salmanthasleem52643 жыл бұрын
@@czcleats I just did ✌
@czcleats3 жыл бұрын
@@salmanthasleem5264 you can do it 👍 good luck
@salmanthasleem52643 жыл бұрын
@@czcleats thanks a lot
@vinaynithilan17423 ай бұрын
Hey bro ihave the nike mercurial 5 .what materials do i need to replace the studs
@czcleats3 ай бұрын
Hi, don't do it these boots are fragile
@SYCOOFFICAL5003 Жыл бұрын
And I don't have drill plzz make with hand in another video plzz
@vsubhuti Жыл бұрын
Please help my plastic stud on my cieats is worn out how can i fix it ?thanks
@czcleats Жыл бұрын
Hi, try soleplate swap
@cesersalad38007 ай бұрын
do you drill all the way through the sole of the shoe?
@czcleats7 ай бұрын
Yes mate, but be careful you can damage upper very easy
@henryroberts7011 Жыл бұрын
Where do i find stud receptacles or something similar ? Can’t find them anywhere
@czcleats Жыл бұрын
I found my on ebay, maybe try your local football shop
@Ugrbic17 күн бұрын
I know its a year later but i recently found that its actually something called captive t nut, you just need to figure out what size you would need
@willmorgan6922 Жыл бұрын
Where do u get the receptacles from
@czcleats Жыл бұрын
Ebay
@caes444445 ай бұрын
is it possible to convert FG studs to AG studs by hallowing out the studs?
@czcleats5 ай бұрын
I don't know I have never seen this before
@ikromhusanov22777 ай бұрын
hey where can we find receptacles from
@czcleats7 ай бұрын
Hi, check ebay or your local shops ✌️
@enriagui852 жыл бұрын
I'm in USA I was looking on Google for the studs receptacle and I didn't find anything, can you share the link? Thank you
@czcleats2 жыл бұрын
Maybe they are sold out, I have couple home
@FULLSENDFC2 жыл бұрын
is it possible to convert sg boots to ag?
@czcleats2 жыл бұрын
Maybe yes if you have some TPU studs
@alonsomvx227 Жыл бұрын
What is the blue saw u used called ?
@czcleats Жыл бұрын
It is iron saw but you can use knife even better is electric saw, angle grinder or drill with good attachment
@benreesmtb93628 ай бұрын
Can you put 15mm in the back and 13mm in the front?
@czcleats8 ай бұрын
Yes
@07duduzin073 жыл бұрын
are studs nike and studs receptacles adidas?🤔🤔
@czcleats3 жыл бұрын
Yes 👍
@rickpatel38192 жыл бұрын
Is it possible to do this on Nike cleats?
@czcleats2 жыл бұрын
Yes it is
@jonnybarron15183 жыл бұрын
Whats the point of drilling the first smaller hole? Why don't you just drill the big hole?
@czcleats3 жыл бұрын
You can better target middle of stud ✌
@jonnybarron15183 жыл бұрын
@@czcleats your wo helpful 🥺thanks so much
@ggswagg4 ай бұрын
Avere can I find those stud replacement of Adidas? And how coul I use to avoid the hammer? Not to damage the shoes?
@czcleats4 ай бұрын
Hi, try ebay and be careful, if you have really good boots find some specialist on IG like bootsnpieces instagram.com/bootsnpieces?igsh=czgxaGpka2l0b202
@ggswagg4 ай бұрын
@@czcleats I find something on eBay, but are the stud holders that are placed in front different from those on the heels different?
@czcleats4 ай бұрын
@@ggswagg yes, front are shorter
@ggswagg4 ай бұрын
@@czcleats ah ok, is it possible to know the dimensions that should be placed? both thread and length? both those in front and behind
@czcleats4 ай бұрын
@@ggswagg you have in package 4 longer and rest are smaller
@darthajax1594 Жыл бұрын
Is it possible to change FG to AG?
@czcleats Жыл бұрын
Yes if you will swap soleplate
@marcusvinicius4816 Жыл бұрын
Onde encontrar pra comprar esse peices adidas ??? Que coloca por dentro da Chuteria ???
@czcleats Жыл бұрын
English please
@respect_1224.2 жыл бұрын
But what material is needed means metal studs
@czcleats2 жыл бұрын
Nike replacement studs ✌
@Cukier_102 жыл бұрын
Hi, where I can buy the studs and studs receptacles? but in different sizes
@czcleats2 жыл бұрын
Hi mate, try check ebay or your local shops. Studs are classic from nike. Receptacles are now very rare so if you don't find, send me a message czcleats@gmail.com ✌
@offthehookfishingnyli980 Жыл бұрын
Where can I buy receptacles?
@czcleats Жыл бұрын
Try ebay
@leonardopieruzzini86707 ай бұрын
Cómo se llama la pieza donde van los tacos de aluminio enroscados?
@czcleats7 ай бұрын
English please
@respect_1224.2 жыл бұрын
From where should I buy this
@czcleats2 жыл бұрын
Try ebay or some local shops ✌
@ryanwhyte13123 жыл бұрын
How did you get the studs in the front in?
@czcleats3 жыл бұрын
It is little bit tricky. You must prepared good hole ✌
@ryanwhyte13123 жыл бұрын
@@czcleats Thanks - what size studs do you recommend? Can rugby ones also be used that are 4x15? and 8x11?
@czcleats3 жыл бұрын
@@ryanwhyte1312 I used 11 and 13 mm but you can use also 15
@ryanwhyte13123 жыл бұрын
@@czcleats Thanks man. One last thing, have you got an alternative to stud receptacles? I can't seem to find any where I am
@czcleats3 жыл бұрын
@@ryanwhyte1312 I found my on ebay ✌
@arunrana6170 Жыл бұрын
Can you convert sg to ag/fg?
@czcleats Жыл бұрын
Yes, if you use plastic studs
@user-ob8ki2tm1t2 жыл бұрын
where can i find the studs with these bases?(pls answer)
@czcleats2 жыл бұрын
Hi mate, check ebay ✌️
@user-ob8ki2tm1t2 жыл бұрын
how to look it up in search?
@czcleats2 жыл бұрын
@@user-ob8ki2tm1t stud receptacles
@user-ob8ki2tm1t2 жыл бұрын
@@czcleats ty bro
@rightsingh4813 Жыл бұрын
Bro can you make my studs like this i will pay you
@czcleats Жыл бұрын
Hi mate, check some specialist on IG loubootscustomasition ✌️
@ytursaltyxdd949910 ай бұрын
Where could I find those adidas things at?
@czcleats10 ай бұрын
Try ebay
@praveenc072 жыл бұрын
Where can we buy this studs? Any links?
@czcleats2 жыл бұрын
Ebay
@czcleats2 жыл бұрын
If you can't find try check local shops in your country or l have couple in my house ✌️
@praveenc072 жыл бұрын
@@czcleats can you please send the link for eBay
@czcleats2 жыл бұрын
@@praveenc07 I don't if they are still on ebay must search trought their system
@praveenc072 жыл бұрын
@@czcleats where you brought that inside socket for screwing studs
@muhamatissahak84052 жыл бұрын
Link
@czcleats2 жыл бұрын
?
@SYCOOFFICAL5003 Жыл бұрын
I am from Pakistan and I don't think ebay is in Pakistan
@riceandbeans82902 жыл бұрын
Jesus is the way the truth and the life no one gets to heaven except through Him. Repent before it’s too late it’s your choice... heaven or hell change your ways and turn to Him !!