Twin Disc Clutch - Adjustment Instructions

No video

Twin Disc Clutch - Adjustment Instructions

Рет қаралды 77,401

EWDRILLING

Күн бұрын

Cause of clutch smoking and how to make necessay adjust,ments to Twin Disc clutch.

Пікірлер: 22

@davidgould5708 Жыл бұрын

appreciate the info given here. hopefully I find success with my set up.

@lotlee 10 жыл бұрын

THANKS A LOT FOR THE VIDEO.BECAUSE OF YOUR VIDEO WE WERE ABLE TO SOLVE A PROBLEM IN OUR OF CAT MACHINE(RM 300) WHICH IS ALSO HAVING A SIMILAR TYPE OF OVER CENTER CLUTCH.

@udoweber5819 8 жыл бұрын

Thank you from Canada.

@EWDRILLING 8 жыл бұрын

+Udo Weber - Your Welcome

@JlhIncExcavation 6 жыл бұрын

Thanks, i'm going to check in the morning to see if that solves my tub grinder problem or its shot

@stuatwhakatu 10 жыл бұрын

thankyou

@rmallaire 7 жыл бұрын

Hello, I am working on an American 7250 crane. It has a SP 214 P1 twin disk clutch. The clutch is slipping when we try to pick heavy loads. I tried adjusting it. Once the pin is pushed in, the plate will not spin when hitting it with a punch and hammer. I did not want to excessively hit it and damage anything. Would you have any ideas as to why it will not spin? Thank you

@EWDRILLING 7 жыл бұрын

I am waiting on a reply from our Mechanical department! We will let you know as soon as possible! You could also call the office at 570-966-7312 and ask for Michael or Laverne!

@EWDRILLING 7 жыл бұрын

Here is the response that I got from Michael who was the one who shot the original video: "Either your out of adjustment or then its locked up." If you have more questions feel free to call 570-966-7312 and ask for Michael or email him at michael@ewdrilling.net.

@rmallaire 7 жыл бұрын

Thank you for the reply. I gave it another attempt and was able to get the ring to spin clockwise one notch, it did take several blows of a 3 lb. hammer and punch but the clutch is now properly adjusted. Thank you for your help, the video was very useful.

@EWDRILLING 7 жыл бұрын

Wonderful - I'm glad it was helpful!

@RandallMoore1955 7 жыл бұрын

The SLIDING SLEVE.

@2thetoptreelandscapingperd737 3 жыл бұрын

I have a morbark model 290 twin disc. We was engageing in to start chipping and it was going in put all a sudden it want move any now, you can move it a little but it want engage. My question is, what could it be causing it not to engage it's real hard please help. Thank you

@EWDRILLING 3 жыл бұрын

I recommend that you contact our service department. Contact us at 570-966-7312 and ask for the shop foreman, Laverne.

@fidelleon7550 22 күн бұрын

Were you able to solve your question, I’m currently having the same issue

@WCW7578 9 жыл бұрын

Thank you for sharing the video :)

@frankcurtis3368 7 жыл бұрын

Does anyone supply a tool to fit the adjuster? It is easily damaged by a punch & then jams in the over centre mechanism.

@EWDRILLING 7 жыл бұрын

I am checking with the person who shot this video about your questions. I will let you know his response shortly!

@EWDRILLING 7 жыл бұрын

The person who shot the video is not aware of a tool - Sorry!

@frankcurtis3368 7 жыл бұрын

I was disappointed with the video. I was hoping Twin Disc or someone supplies a tool to fit and turn the adjuster nut. It is quite soft & easily damaged by a punch. It then jams in the over centre mechanism. How do we measure the 150 lb/ ft adjustment torque?

@EWDRILLING 7 жыл бұрын

I am checking with the person who shot this video about your questions. I will let you know his response shortly!

@tobyhel0 4 жыл бұрын

Hi Frank, I handles Applications & Sales Engineering at Twin Disc. Did you ever get helped with this issue?