Two-Sided CNC Without Fixtures!
Рет қаралды 7,048
7 ай бұрынHere I show my method using a touch probe and custom routines to identify reference holes to align top and bottom machining processes on a CNC router. No jigs or fixtures necessary!
- - - Affiliate Links - - -
Standard 1/4" plunge router bit: amzn.to/3LB8zi3
Long 1/4" plunge router bit: amzn.to/3y8p4yZ
CNC Dust Foot: amzn.to/3WxwaWZ
Want to build a Pinball Machine? Check out my CobraPin Pinball Controller electronics!
@siukcnc 7 ай бұрын
Nice to see someone else using cambam. It can handle all the fancy machining, it just doesn't have a fancy GUI.
@laurentmaillard1355 7 ай бұрын
🙌
@jabdoa 7 ай бұрын
Nice video. Guess for a professional production you would use a jig which fits alignment/reference holes. Not as cool but more robust and faster. Audio is slightly clipping in the video.
@thomasfulenwider 7 ай бұрын
Nothing I do will be for production. But yes, jigs are definitely the way to go for production. @jabdoa Regarding the audio, is it just the voice over or all of it?
@jabdoa 7 ай бұрын
Just the voice over. Just a bit but noticable in the beginning for me.@@thomasfulenwider
@thomasfulenwider 7 ай бұрын
@@jabdoa I found where the problem was. Thank you!
@michaellitzkow8123 4 ай бұрын
Great method. How can I learn to write similar gcode macros? Can you share yours?
@thomasfulenwider 4 ай бұрын
I can pull them off my machine. What kind of controller do you have. Mine has some Centroid specifics involved.
@arbjful 4 ай бұрын
So a reference hole is necessary for this method to work?
@thomasfulenwider 4 ай бұрын
Yes, some sort of reference. The reference could be placed in an off-cut so it is not on the part itself.
Encar Woodworking
Рет қаралды 20 М.
Pierson Workholding
Рет қаралды 22 М.
Nir Gaming
Рет қаралды 4,4 МЛН
Rj Mobile 01
Рет қаралды 13 МЛН