Custom Wedge Shafts - Do They Make a Difference?

Рет қаралды 102,159

5 жыл бұрын

Join our new community on Patreon! / tourexperiencegolf
txg.ca - Testing three different shafts in the same wedge to see the difference in launch, spin, consistency, distance control and more! Is it worth having the shafts in your wedges custom fit for your swing? Find out in this video!
Filmed at: Tour Experience Golf
Custom Golf Club Fitting Studio - Toronto, Canada
Featuring: Ian Fraser & Matt Blois
/ theofficialtxg

Пікірлер: 190

@TC-ps9sd 5 жыл бұрын

Very informative, and I appreciate how Matt sums up the headlines/learnings. Thanks guys.

@fjvasquez1 5 жыл бұрын

Matt and Ian, your channel has really opened my eyes on fitting and how to improve my game. It really comes down to the comparison of a fitted suit or a shoe that properly fits. Off the rack just doesn't cut it for people who want to get the most out of the game. I applaud you guys on the work that you do, and continue the great content that you give us. Regards from Los Angeles, Jason.

@craigdempsey9133 5 жыл бұрын

Great video guys. I definitely think wedges are one of those clubs in the bag that people very often overlook in the fitting process for the exact reasons you just mentioned. Thinking that whatever shaft it comes with off the shelf will be good enough. Keep the great content coming.

@rogerashenfelter6275 5 жыл бұрын

Perfect Video guys. Would of never thought of changes on a wedge shaft.

@hbostars 5 жыл бұрын

Proud of being a Patrion member. Mat delivering the strikes, and Ian delivers the knowledge, which is almost as magic.

@chrischampion727 5 жыл бұрын

This is one of the most informative and relevant videos you’ve put out. You guys just keep raising the bar!

@ianfraser3194 5 жыл бұрын

Chris Champion Thank you Chris!!

@kevinguyotte79 5 жыл бұрын

Love this vid. Awesome to see how the weight is so important to consistency of strike

@mh1124800 5 жыл бұрын

Wow! All of those techs saying “get this, get that”. I can just watch you guys and just get what I want. Job well done.

@golf007sd2 5 жыл бұрын

I have owned a few different wedges in my years of play; shaft chose was never on my radar tell last year. This video verified my own testing of shaft weight, in regards to player ability. One great point that MUST be said again, in regards to wedge performance on "spin:" The Ball used will greatly influence action on the green. Thank you TXG for educating us all; please keep such insight coming....cheers.

@stephenshupert5534 5 жыл бұрын

Love the high-rev in my taylormade Hitoe, feels amazing.

@robertsalazar5874 5 жыл бұрын

Thank you this is really hard work! I appreciate the focus on these wedges

@davidminchin9469 5 жыл бұрын

Another great video guys, such a refreshing change to hear quality information without all the marketing BS that sometimes comes out of the manufactures. Keep up the great work. Just a shame that most people don’t have access to your level of custom fitting & knowledge.

@jasonchen1608 5 жыл бұрын

Great video guys! I've been waiting patiently for this one. Bridgestone Tour BX vs. XS next, Please!

@dabbs3 5 жыл бұрын

Great video! I found when trying the apex iron I liked the heavier tour elevate shaft better. I swung faster and made better contact with the ball. I swung slower and made bad contact with the ball with the lighter shaft. So some great info in this video. Great work guys!!

@eldonpetty501 5 жыл бұрын

Information is power.... 👏🏼👏🏼👏🏼 I enjoy every video you guys put up.

@Mj-CWO4 3 жыл бұрын

Excellent video, appreciate your efforts to clear up misconceptions

@laneevans7360 5 жыл бұрын

Excited about this and the wedges video to come! Still waiting to see the vid on using 7 iron taper tips in the wedges or soft stepping an X100 or whatever that deal is! Hopefully we’ll get the explanation soon 😉 Cheers guys, you’re on an absolute hot streak since the pga show with these videos!

@jerrypetersen5739 5 жыл бұрын

Great job, enjoyed watching and learning. Looking for more in the future.

@michelpaquette6396 5 жыл бұрын

Amazing video, once again. The knowledge is great keep it up guys.

@anthonycsimmons7215 4 жыл бұрын

Excellent Video guys, thanks so much. Just verifies that custom fit wedges are like custom fit Irons,they make a huge difference. When i had my Vokey 48 & 52 wedges fit, i ordered them with the same XP-90 R-300 shafts that we fit for the remainder of the Irons, and i notice that the lighter shafts work better for me. 61 years old and slow to medium clubhead speed. Thanks again Tony

@weslangkau1470 5 жыл бұрын

Reinforces the reason I’m coming in for a fit. Strike my irons all over the face. Club face just gets lost in the swing. Can’t wait for that! Great video guys!

@mikecook8059 5 жыл бұрын

Amazing information to be learned. Great video, thanks for the education!!

@zacharymilos392 5 жыл бұрын

I did my own testing using Trackman. I found that on any given hit, shaft didn't matter that much with spin all that much, etc. But it was more of the preferred feel and how that feel/profile and weight translated into how well I could strike the ball. I strike the ball much better with Modus than I do DG because I use Modus in my irons. Great vid boys.

@nastynate9529 2 жыл бұрын

This would make sense, considering trackman does not read spin from the ball. It uses predetermined calculations based on other ball data to approximate the spin rate. Thus the same shot from two different clubs would likely yield the same spin rate, despite perhaps one spinning more than the other by a marginal amount.

@isao8402 5 жыл бұрын

Thanks for taking the time to make this video. Going forward, I would love to see a video comparing and contrasting wedge shafts of the same weight range if it all possible.

@ianfraser3194 5 жыл бұрын

Isao great idea!!

@ripyerballs 5 жыл бұрын

Suberb video lads very informative experience keep up the fantastic work cheers Peter

@jesseruiz9257 5 жыл бұрын

Thanks again. Been always curious on this.

@storieswithaly1247 5 жыл бұрын

When I bought my wedges after a fitting on my irons, I went (after testing with std wedge and various steel shafts) with the same graphite shaft as my irons so that the feeling across the bag was more uniform and seemless. Indeed the results for me were much better especially going from the pitching to gap wedge (as srixon in left hand did not do a gap wedge in their set). Funnily the gap wedge (RTX 3) with that same graphite shaft as my irons is now the best and my favourite club in my bag. So I would say on my experience both in fitting, on the range and on the course the shaft does matter and in my case the graphite shaft made a big and preferred difference.

@frostshock13 4 жыл бұрын

I switched to accra spt on my 4 scratch forged wedge shafts after a lot of testing. I really love the overall feel of the clubs now, they feel stable and have solid spin. Good fitter really can help you find what feels and reacts to what you are looking for.

@jasondrake913 5 жыл бұрын

Another great video guys. Would have liked to see the stock shaft compared as well considering most amateurs play wedges “off the rack”.

@laurentschmitt5110 5 жыл бұрын

Great work Merci beaucoup !!

@chrisfreitag2603 5 жыл бұрын

Excellent video with great insight. I suspect you would see greater differences with an average golfer, with more variable swing speeds, when you optimize the shaft for wedges. Even with Matt, aka “Iron Matty”, consistency you saw subtle but significant differences with respect to consistency and dispersion. Based on this, looks like I’m getting Project X LZ shafts when I come for my wedge fitting.

@nv00021 5 жыл бұрын

Brilliant content boys....love it. Let's get some comparison videos on board if you are so inclined. Would love to see some of those. Thanks

@Wrobs01 5 жыл бұрын

Love the topics covered here guys always informative and helpful information. I'm not sure if you guys have done video on this topic before but could you possibly discuss shaft weight and how it effects your delivery to the ball ie heavier shaft keep you more shallow and heavier possibly allowing more vertical swing plane.

@ahowarda 2 жыл бұрын

Fitter put same shaft from 4 iron through all of my wedges, C-taper 130x. Can’t wait to see how it performs on the course! Hopefully getting them in the next couple weeks

@richardlovell7316 4 жыл бұрын

Good stuff, fellas! I can see it now: Matt and Ian petition the Golf Rules to carry...let's say 23 clubs to fit the partial wedge-shot shaft, etc, etc. You're reinventing the game, fellas and definitely improving mine. Still planning on my trip tp T-Town for a fitting. I may have to work out a contract with y'all for as many people as I refer to your channel and shop. Okay, j/k.

@whogg0521 5 жыл бұрын

I have the old rifle spinner wedge shafts and SW of D5. I just have always loved the feel. They are 5.5 stiffness. But that is also when I used to play rifles at 5.5 in my irons. I was fit again last year for Project X LZ in 6.5 and live those. Makes me wonder if I should revisit my wedge shafts again.

@sidnickels 4 жыл бұрын

The only problem with what you’re saying is finding a good fitter. I can go to 5 different fitters who all say something different.

@vikrampitre2343 4 жыл бұрын

So tru

@camehly2184 3 жыл бұрын

It isn't a bad idea to go to different fitters. If they are good they should be trying to achieve the same thing with you. Its up to you to decide which ingredients ultimately work and feel the best for you.

@markmcardle2934 3 жыл бұрын

I can tell you that only fitter that you want to go to is a master fitter that is top 100 in the world there is a huge difference going to some one that says okay looks like the clubs are this that come with this shaft and you get them and not that great. Cause those shafts aren’t spine aligned and are just put on. To many other things going on that they don’t care 🤷🏻‍♂️. Makes big difference on dispersion and consistency which increased confidence. 6 iron on my club set was 160 with stock dynamic gold stiff shafts right shaft and same head loft and look as well as forged. Hit ball 216 !! Do the math there and was swinging easy just making contact with right components. Go get fit true club fitters will tape up clubs so you can’t see brands in my experience !!

@xTRUExiNsANiTYx Жыл бұрын

@@markmcardle2934 you did not go from hitting a 6 iron 160 to 216 by changing shafts. The worst driver shaft to the best driver shaft isn’t a 56 yard difference. Absolutely no way in hell it’s there in an iron shaft. *Maybe* 160 to 186 is reasonable. PGA tour players average 188 of carry on their 6 irons. So if you really did go from 160 to 216, you had severely weak loft and went to extremely strong lofts. Zero percent chance the loft didn’t change if there’s that big of a jump

@cahal21 5 жыл бұрын

Great video. Loved the info on what to look for on launch angle, spin rates and deviation. Would love to know targets for lofts oustide of the 54 degree that was tested. Thanks again!

@JamesThompson-zl2sk 5 жыл бұрын

Nice to subscriber numbers going up well deserved

@ww-oo7ic 5 жыл бұрын

Brilliant!

@stepheningerski9177 4 жыл бұрын

Great video! Would love to see the same sort of thing in shorter shots. Something like a CTaper vs a Hi Rev 2.0, but on a 30-50 yard shot when the swing speed will be so much lower

@roniwankovitsch 4 жыл бұрын

It would be interesting and informative to have a video on the various wedge grinds.

@dukejet6997 2 жыл бұрын

Matty is a bloody robot ! What a great lefty he is. Glorious swing.

@MattMarcoccia 5 жыл бұрын

This was super helpful because I'm doing a wedge fitting with you guys in a few weeks.

@aarons8301 5 жыл бұрын

You two are absolutely fantastic! Your reviews, tests, and pure unbiased info is second to none. I can’t tell you how much I appreciate this feedback. Thank you!!

@waynesmall6384 5 жыл бұрын

Would have liked to have seen shafts like kbs hi rev 2.0 and dynamic gold spinner compared to standard iron shafts, I have 2.0 and they definitely spin more - love the videos great work

@craigedga4r 4 жыл бұрын

Excellent vlog again guys - 🌟🌟🌟🌟🌟 For a slow swing surfer I presume a heavier shaft for consistency. What are feelings about some people saying 50 and 54 go with your iron shafts and then change to a specific shaft for 58 / 60 and 62 / 64??? 🤔🤔🤔🙂🙂🙂

@stuboy13 2 жыл бұрын

More of these wedge shaft videos please lads! 80

@jelenajurkovic5307 5 жыл бұрын

Nice video, just got back from the Toronto Golf Show,.When can we expect to se TXG booth at the Toronto Golf Show? GC Quad : find out what your numbers are, closest to the pin challenge, optimize your drive, and so on. Maybe even Ian getting on the stage and doing a lecture on club fitting???? :-) Cheers, Dario

@jonasandersen2126 5 жыл бұрын

More wedge episodes please :D

@garythompson9439 5 жыл бұрын

100% wedge fitting fanboy here....TXG with Ping Stealth wedges - 50 (bent to 51), 56 and 60. I went with Oban CT 100 in my gap (51) to match my irons as it was primarily a full shot club. Fit with Nippon Modus 120's for the 56 and 60. Most consistent on yardages/spin/trajectory and best feeling wedge combos I have ever played. Interesting side note, my gap (51) has taken over as the greenside go-to club for bump and runs and low spinners given its tremendous consistency, feel and predictable run out. A fitting investment that continues to pay dividends. Kudos to Chris, Greg and Mike @ TXG...guys are subject matter experts and class acts.

@user-th4ux2qe3b 5 жыл бұрын

Modus 120 in Wedge Shaft? Or just the standard Modus 120 iron shaft?

@paulknox4965 5 жыл бұрын

Great vid. Really interested in learning more. I abandoned my TM milled grind 50/54/58 with dg s300 wedges from last year as they were so different in feel from my apex cf16 irons with xp95s. In a quest for consistent feel, I replaced them with apex AW/SW with xp95, and bought a Mack daddy forged 60 that has a relatively heavier dg s200 shaft. I was going to try an xp95 shaft in the 60, but am interested in hearing your thoughts on this (and also interested in learning more about 8i shafts in wedges). Btw, I hit full and partials with the 60, but do most of my chipping with the 50deg, which is now the AW. Thanks!

@colbys.6095 5 жыл бұрын

I would really like if you guys did a review on the Cobra MB blades. I know they aren't the newest club right now but I would love your insight on them. Love the videos.

@seancook2264 4 жыл бұрын

Had T20 wedge fitting. Modus 105S on irons but Gone with Modus 120S soft stepped in the wedges @ 50;54&58 and slightly flatter lie in 54&58.....🤔👍🏼

@mikeb1149 4 жыл бұрын

Amazed at the result of the 80yrd swings. They look like something I might get 30 yards out of at best.

@marcduncan139 Жыл бұрын

I'm playing Steel Fiber fc90 F3 in my irons and have been playing the KBS Hi Rev 2.0 115gm in my 54*/58* wedges and I really like the feel. Recently picked up an RTX FF with DGTI spinner 2 128g. Not sure I like it at all, however, the results on 60-90yd shots are really good, just feels like I'm hitting them with a piece of rebar.

@all_n_baby 3 жыл бұрын

I have the project x lz shafts throughout my irons and Wedges and couldn't imagine using a better Shaft for both.

@banditbaker1675 5 жыл бұрын

Really enjoyed the vid Guys as always, I'm on a high today as was discharged by my Consultant who suggests I start to swing a club again and start playing in March as it gets warmer in the UK. He offered to write to MrsBandit saying that it's vital for my recovery that I play at least 3 times per week, the Docs a Superstar!👍🤣🏌️‍♂️⛳😁

@clubchampionmedia 5 жыл бұрын

👍👍👍👍👍

@charlesrohl7635 5 жыл бұрын

Ok Raymond !😂🏌️

@ianfraser3194 5 жыл бұрын

Bandit Baker great to hear you’re heading back out to the links!!! Hope you’re well my friend!! 👍🏻

@banditbaker1675 5 жыл бұрын

Cheers Ian, yes feeling great thanks. I'm working hard in the gym building up my strength and fitness. I'm probably fitter now than I have ever been, so can't wait to get out and start playing again. BOOM!

@Keensensepersonaltraining 5 жыл бұрын

Watching TXG with some chillhop in the backgroup is my new unwind.

@jguitar29 4 жыл бұрын

Shafts definitely matter... The only stock shafts left in my bag are on my woods.... this past 18 months I’ve been fitted for different shafts through out and my game has improved by miles... after each fitting..immediately see the difference on the course I even changed shaft on putter... shaved off about 5-10 strokes this season

@martinredgrave4767 5 жыл бұрын

I am playing Ping G400 with graphite shafts down to gap wedge. What do you recommend for sand and lob wedge, steel or graphite? Great video as always. Thanks

@frogz2267 5 жыл бұрын

Hi can use do a new ball test compared to a used ball. It would be interesting to see the same ball new vs used. Love the Chanel 👍

@CraigalFun 5 жыл бұрын

I like the KBS High Rev2.0. 125g

@thegolflife7565 5 жыл бұрын

I put a KBS Tour-V wedge shaft in my new Cleveland wedges to bring the spin down a bit, the stock dynamic gold wedge or whatever came in it spun it way too much.

@austinlauer1910 5 жыл бұрын

In a video could you guys answer the process of becoming a club fitter or just being involved in the golf industry? I'm currently transitioning from the Air Force and want to make a career in golf. Whether that is playing or just being involved. Thanks!

@tnjbrown 5 жыл бұрын

The fitter I work with generally suggests using the 8i shaft you use in your irons in your wedges, to match up to the feel to the rest of your irons.. his view is the wedge specific shafts don't add much to spin (as noted in this test), and most players will be more consistent with something that matches up more closely to the feel throughout all the irons. Using the 8i gives a little softer tip section in the wedges for better feel on partial shots.... I think this testing supports that! Do you guys at TXG ever do this?

@ianfraser3194 5 жыл бұрын

Tony Brown you have a smart club fitter Tony!!!

@invisaman75 5 жыл бұрын

11:21 Timing is speed!

@FredzGolf Жыл бұрын

I found simar results that also gained more spin with stiffer/heavier ...big up the KBS Custom Series 😋

@JC-eq7jx 5 жыл бұрын

Guys, another great and informative vid. No wonder I am an avid viewer of all your material. Could you help me? I play JPX919 Forged with KBS TOUR (R) 110g shafts but have XP105 (R) shafts (fitted) in my Vokey wedges. I am really inconsistent with my wedges. Do you think my wedge shafts seem right and should I get the same shafts (as my irons) in my wedges or go for something heavier/stiffer? Many thanks.

@dongolfnut5558 5 жыл бұрын

Great video, what are the grips on the shafts?

@bad01neon 5 жыл бұрын

I did an iron fitting with Mizuno last season into the JPX900 forged with KBS tour 90 Stiff and have been better with my irons than ever. RTX 3 wedges with dynamic gold that I launch low and don’t feel comfortable with. Curious as to what you would recommend for a replacement wedge shaft in that weight category.

@79AnneMa 5 жыл бұрын

I love the rtx 4 with DG s400😁

@ianfraser3194 5 жыл бұрын

AnneMa Drou The new RTX4 heads are gorgeous!!

@davidlum8313 5 жыл бұрын

I have graphite shafts in my irons. Since using graphite, I've always had steel shafts (manufacturer's stock) in my wedges. Do you suggest trying to get the shaft weight close to the same as graphite? Or something between stock steel and my graphite shaft weight? I use gap and sand wedges for full and partial shots.

@tomduckworth8335 5 жыл бұрын

Following up on the Project X LZ I have the PX LZ stiff graphite in my irons based on what you said would you lean toward the LZ steel shafts in my wedges or would you think about the graphite? I have been wondering about this because I like the shafts in my irons but they are very different feel now to my wedges.

@robbarn 5 жыл бұрын

Hi guys! I really love what you are doing but could you get back to focusing some on the mid-high handicap players? You did some fittings etc. and I’d be very interested in more of that content. Especially I’d like to see the numbers on radar vs the players perception on what he/she normally thinks they are, in distance etc. I recently started going to a place with indoor trackmans and I’m having a hard time understandig it, I feel it is inacurate vs what I know I perform on course. Thanks!

@astroidother3609 3 жыл бұрын

Very interesting video. I play Modus 3 120S in my irons but have S200 wedge shafts, which are about the same weight. Should i try S400 or even Modus 3 130S shafts? Thanks

@fergusreeverealestate.7409 5 жыл бұрын

What about heavy/stiff graphite shafts? I have the recoil f3 in my cobra forged tec irons, and was considering getting my new gap wedge and 56 degree wedge with that same shaft. Any thoughts? I also game a 60 degree vokey with a steel shaft which I wouldn’t change- I like that club as it is for just working around the green.

@jlluthe 5 жыл бұрын

Just wondering if you plan on doing a video with other wedge shafts? KBS 610 or HI-REV. Modus 105,115,125 wedge flex, true temper spinner, ust wedge Proto or Accra?

@bradholomek9493 5 жыл бұрын

Great video guys👍 On the shafts you guys use, did you chance from pure grips to lamkin?

@ianfraser3194 5 жыл бұрын

Brad Holomek Lamkin Sonar

@stevenm223 5 жыл бұрын

Love watching you guys. But i don't have places where they offer wedge fittings like you guys recommend. Most fitting places do a basic lie,loft shaft flex.

@samnangith19 4 жыл бұрын

Matt, are you always asking a question? You remind of stewie from family guy with your voice inflection. Great content

@Barkingtoad1 4 жыл бұрын

Currently using project x pxi Stiff shafts in my irons , looking at getting some vokey or hitoe wedges what shafts would you recommend

@VERTICALWisdom 5 жыл бұрын

Quickly dating myself, the best feel wedge was the Wilson R90 --- coated a red color sort of rubber. Miss that ole dog.

@thom7272 5 жыл бұрын

Would you match your gap wedge shaft that you use mostly on full shots with the rest of your iron set

@p1miguel999 5 жыл бұрын

TXG I am a terrible wedge player with all my off the shelf wedges. I believe they are all S200's. One day I found an old Izzo wedge in a salvage yard and hit some rocks around. Loved the response and feel it gave. It has a Precision rifle WeDgZ shaft. I messed up the head so looked on ebay and found a full set of these. Been playing better golf ever since. I don't see this shaft anywhere. What is this shaft and why do i not see them in stores?

@ronirwin1443 5 жыл бұрын

Would you generally increase shaft weights from Driver through irons?

@CarlosLopez-yi8fw 5 жыл бұрын

Hi! Could you tell me which shaft plays stiffer... PX LZ 6.5 or KBS Tour S+ ? I’m thinking of putting a LZ 6.5 in my 48 and Tour S+ in my 54 & 60. Love the 125 weight, just don’t want to play a stiffer shaft in my 54 or 60. Thanks!

@deuce3811 5 жыл бұрын

My iron shafts are project x lz 6.0. 120gr. What would be a good wedge shaft?

@mtaddei78 5 жыл бұрын

If I have DG 120 X100 in irons is it a good idea to go the same with wedges? Thanks.

@andywarren277 5 жыл бұрын

I know you can't test everything, but interesting that you didn't include a KBS shaft. I was custom fit into a KBS Hi-rev 2.0 shaft for my 55 and 60 wedges which outperformed (spin, launch and control) everything else. I tend not to hit full shots with these wedges which may be the difference.

@neilfournier4200 5 жыл бұрын

How about KBS Hi-Rev and 610 shafts? Though I suppose it will still come down to which promotes consistent contact etc ...

@ZefrossMoss77 5 жыл бұрын

I've got Ping i200's and Glide 2.0 Stealth Wedges with Moodus 105 shafts. Should I have something more like Project X LZ or DG S300 shafts to get more weight in them? Seems understandable that Matt has Nippon 130 shafts and so the S400 Was able to hit the 105s during a fitting but was only against the Ping AWS shafts. Curious as to your opinion on if I should get my wedges reshafted for something heavier. Great video again guys.

@ZefrossMoss77 5 жыл бұрын

Specifically asking about getting heavier wedge shafts.

@Zero.124 3 жыл бұрын

I have project x 6.5 LZ in my irons. What would you recommend in the wedges? 8 iron 6.5 LZ shaft in wedges? Or straight in in?

@kimhannemann 5 жыл бұрын

Matty the Machine. Your very own human Iron Byron.

@ianfraser3194 5 жыл бұрын

Kim Hannemann 🤣🤣🤣

@jameswalton2845 4 жыл бұрын

Im playing project X 6.5 in the irons and love them!! is LZ 6.5 a good wedge shaft? Or 6.0 LZ?

@apaulmcdonough2170 2 жыл бұрын

6.0 X LZ has the same Stiffness as 6.5 X. You can find X in 7.0, but NOT X LZ. I play 5.5 X LZ in my 718 AP2 Irons along with a 46° & 50° Vokey SM6. I have 5.0 X LZ in my 54° & 58° Vokeys. The four wedges were Custom Ordered after my Driver/Iron Fitting, before I bought the Irons. I use these two for a wide variety of short and partial Shots 80 Yards in.

@ultradcool122 5 жыл бұрын

I feel like my wedge shafts are too light cause especially on those partial shots I feel I have no control

@mangoman2148 5 жыл бұрын

Where does the stock Dynamic Gold 'wedge flex' fit into this? I swing about 116 with driver, X100 shaft in my irons, but my wedges came in 'wedge flex'. Are they too soft in comparison to the rest of my bag?

@hurley7414 5 жыл бұрын

Interesting how shaft weight effects spin on other clubs in the bag, but not wedges. Is that because of the amount of loft?

@bryanduchane2371 3 жыл бұрын

I absolutely love my wedges, but don't really like the feel of my irons. Beginning to think I need to copy the weight and stiffness of the shafts I'm my irons.... What is the typical shaft in a sand wedge??