I appreciate all the views, comments and advice on the video from you all. Thank you for watching, and if you want to see something else with it let me know in the comments below. I'm trying not to copy to much of what's already been done which is nearly impossible at this point but what I'm trying to provide is a really close in depth look at these guns while also giving you a decent view of them shooting so it can help you decide on a purchase or not.
@americanpatriot98652 жыл бұрын
I’ve got the Cattleman with the birds head grip. It’s my favorite. Nice shooter in 38 special/357 mag. Screws do come loose, but if you use lock tight, that eliminates the problem
@caseysammobench2 жыл бұрын
Absolutely love this pistol. I put loctite on about 2 years ago and haven't had a single issue since. I'd really like to get the 357 version.
@donne9768Ай бұрын
Good video! Knowing what I've learned after owning my Cattleman II for a few years, the first things I would have done is install the Wolff springs in it, and blue Loctite most of the screws. I found an ACP cylinder for it on the bay, and had my gunsmith fit it. It shoots great with ACP, maybe a little more accurate and definitely cleaner. It's a blast to shoot, but I most enjoy in while setting in my recliner and watching INSP. lol
@kerygonder331 Жыл бұрын
I just bought my Uberti Cattlemen in a 45 colt . I got it used but I don't think the person shot it much. It was still in the box and doesn't even have a scratch on it. I paid $ 350.00 for it , I didn't get to shoot it yet but I can't wait. Great video .
@caseysammobench Жыл бұрын
It's a bad ass pistol, tons of fun and by far a favorite in the collection.
@krodkrod81322 жыл бұрын
I bought 2 of these from Cabelas in 357. Hands down, my favorite guns to shoot. I wanted a matching rifle so i bought a henry big boy classic. I wanted it in 357 but they only had a 44 magnum in stock. i ended up getting it. I have a lot of modern guns but the single actions and lever actions are the most fun to shoot.
@caseysammobench2 жыл бұрын
Bro, I did the same thing,lol. You can see in one of my other videos.
@soniapoch7905 Жыл бұрын
hey, which caliber will have less recoil 357 mag or 45 acp? I wonder which one to choose? help
@krodkrod8132 Жыл бұрын
@@soniapoch7905 Mostly depends on the rounds your shooting. But to me, 45 and 357 feel about the same.
@claytonoakley86776 ай бұрын
@@soniapoch7905to me a 45 slowly pushes while a 357 has a sharp snap the 45 is much flatter in comparison to the 357 recoil is much higher in a 357. The 45 hits much slower at about 900 or so fps with 230 g ball ammo. A 357 travels 1400 fps approximately 158g ball ammo both with a barrel of 5 inches. A heavy 45 full size pistol is flat shooting like a 38 special a 357 with a heavy frame has a snappy but manageable recoil may take time to adjust also a 357 can shoot 38 special as well hope that helps
@lovethehuntOutdoors Жыл бұрын
Hold your pistol with the load gate to the sky and lower your cylinder into the weapon. Close the load gate then turn the revolver upside in a horizontal position holding the cylinder from underneath the weapon cradling it. Center the cylinder while slightly pushing forward on the pin until it aligns in place. I hope this helps
@caseysammobench Жыл бұрын
I appreciate it, great channel too man.
@RealPrimusPalus2 жыл бұрын
Three clicks... U - ber - ti. 😂
@caseysammobench2 жыл бұрын
Never thought of it that way, lol. Maybe they planned it.
@mr.mojorisin99992 жыл бұрын
🤣
@reliom983610 ай бұрын
My Uberti makes 4 clicks....
@lovethehuntOutdoors8 ай бұрын
Did you steal that from me? I've said it on my channel before . Lol @Lovethehuntoutdoors
@Wildwestwrangler7 ай бұрын
I have a stoeger uberti 45 colt that is a 4 click.
@megatrends2 жыл бұрын
I have one of these and love it, mine is in .357/.38 Special / .38 Long Colt / .38 Short Colt .... I love it to death.
@caseysammobench2 жыл бұрын
John B. That is awesome. I definitely want to get another one in that caliber.
@megatrends2 жыл бұрын
@@caseysammobench I would not mind a 45 LC if I reloaded my own since it so hard to find but I don't reload my own. I bet it's a fun caliber.
@deerhearseАй бұрын
Just picked up a 5.5 inch and really like it.
@blackpowderfirearmenthusia31942 жыл бұрын
Beautiful single action Army revolver. Great video, thank you.
@caseysammobench2 жыл бұрын
I appreciate it! Thank you. You have a lot of nice revolvers yourself.
@blackpowderfirearmenthusia31942 жыл бұрын
@@caseysammobench thank you.
@wittelarry12 жыл бұрын
Nice video and gun
@caseysammobench2 жыл бұрын
Thank you!
@AliasMark69 Жыл бұрын
I own one of these and it is awesome. Love it. If you hold the trigger and hand "Fan" the hammer _Clint Eastwood style it fires quite fast.
@caseysammobench Жыл бұрын
Haha, I need to practice a lot with revolvers and just pistols in general. I botched the fan in another video. I definitely am pleased with this revolver though.
@terrytilson92015 ай бұрын
I have the cimorron ssa 7.5 inch barrel and it has the 4 clicks I bought it at a gun shop about 3 weeks ago and I love it
@TheLoneRanger7452 жыл бұрын
I also love the looks of that model , I think it's also the model with the lower hammer thumb pull so you can see the rear sight knoch before it's cocked ,. The walnut checker grips awesome !!! It might be a good idea to blue loktight all those little screws if those fall out you'll never find them that would suck really bad .
@caseysammobench2 жыл бұрын
I blue loctighted a couple years ago. No issues since. I love this pistol.
@denisdegamon82242 жыл бұрын
The next time a srew loosens, just use some blue lock tite on the screw threads before tightening.
@caseysammobench2 жыл бұрын
Thank you. I definitely did about a year ago. Haven't had any issues since.
@Wildwestwrangler7 ай бұрын
My stoeger uberti is a beater that's ugly and has the finish beat to rat crap and scratched up, but it's mechanically in great shape and pretty accurate. I like it a lot and don't have to baby it. I carry it everywhere and it's always on my hip when hunting.
@Wildwestwrangler7 ай бұрын
Every single one of my screws is chewed up, but I've lock tited them all and they don't back out. It really is a beater!!! Lol it has that matte finish and a bunch of scratches in it, but I paid 365 otd, and they told me that if I shot it and had problems within the first 30 days they'd take it back and refund me. That's been a few months and a couple hundred rounds ago. It ain't going anywhere.
@randallbyrd1973 Жыл бұрын
Very nice revolver TY for sharing
@caseysammobench Жыл бұрын
Np, definitely worth the money spent.
@michaelhennegan96372 жыл бұрын
Why did I watch this?? Now I have to have one!
@caseysammobench2 жыл бұрын
Lol, It is so fun to shoot. Comes in quite a few calibers. I just always want the 45 Colt. It also matches my Henry Lever Action so it's easier to reload for both at the same time.
@caseysammobench2 жыл бұрын
Did you end up finding one? Hope the prices of them aren't to over inflated.
@michaelhennegan96372 жыл бұрын
I saw a couple on gunbroker at a good price, but there were in the wrong caliber with short barrel and had the brass frame. After Christmas I will get serious about finding one in .45 Colt with a 7.5 “ barrel,
@mypetvelociraptor6 ай бұрын
Subscribed. Just leave those poor danger noodles alone.😂😂😂😂😂👊
@caseysammobench6 ай бұрын
Thank you much, I will lol
@mikebite2292 жыл бұрын
as long as you enjoy your tool that is all that matters.....
@caseysammobench2 жыл бұрын
Hell ya, it is a great one. I definitely recommend the Uberti if you are looking for a solid Colt clone. It doesn't break the bank and is an absolute pleasure to shoot.
@worthweant69932 жыл бұрын
Good video, thanks just purchased one .
@caseysammobench2 жыл бұрын
You are gonna love it. Definitely check the screws on it and throw on a small dab of blue loctite on the front screw that holds on the un-loading pin.
@elnielo1 Жыл бұрын
Nice. I shoot Cowboy in Western Australia and have 2 of them. Same caliber same barrel length. That cylinder release is a real pain in the ass. They go well with my Uberti 1866.
@caseysammobench Жыл бұрын
That is awesome. I want to try out some cowboy action shooting some day.
@Wildwestwrangler7 ай бұрын
How hard is it to get ammo and components in Australia? Do you get to keep your pistols in your house or do you have to store them at the police station or club?
@elnielo17 ай бұрын
Components are becoming hard to get. Most shooters reload and we are having a few problems over the last 2 years. We can keep our guns at home in a safe,@@Wildwestwrangler
@therealhawkeyeii78882 жыл бұрын
Nice Cattleman II. I have one, too, and like it. Mine, however, doesn't have the two positions yours does on the cylinder pin. Since you didn't mention it, you likely are not aware that one of those positions constitutes a safety position that prevents the hammer from falling all the way down. I'm referring to the second notch, i.e., the notch that positions the pin further in. So your Cattleman actually has two safety features not found on the Colt SAA, i.e., 1) the second position on the cylinder pin, and 2) the trigger safety (which allows for the safe carry of six loaded chambers by preventing the firing pin from contacting a primer when the trigger is not depressed). And neither safety interferes with tradition function or looks, which is pretty cool.
@caseysammobench2 жыл бұрын
Thank you so much for the info. I really appreciate it. I really like this pistol. It's been all over the place killing rattle snakes.
@kcstott2 жыл бұрын
@@caseysammobench You need to confirm if your pistol actually has the floating firing pin. I have two Sass pro's with your style hammer and four clicks. it does not have a floating firing pin. your hammer appears to be the type that engages a safety bar that blocks the hammer against the frame. Uberti made a few changes to the guns and none of the instructions match the gun in the box. So how to you confirm the floating firing pin?? Remove the cylinder. and with the hammer down you should not see the firing pin protrude the frame. then pull the trigger and you will see the firing pin protrude the frame. If you see the firing pin protrude through the frame with the hammer down you do not have the floating firing pin.
@caseysammobench2 жыл бұрын
@Kerry Stottlemyer thanks for the pro tip. It is confirmed to have the free floating firing pin.
@valkyr_rl7169 Жыл бұрын
Does this impede any reliability? Looking for a bear gun that will shoot every time.
@therealhawkeyeii7888 Жыл бұрын
@@valkyr_rl7169 Well, the safety that's strictly to do with the cylinder pin won't impede reliability, but the trigger safety mechanism is a little on the tiny and fragile side, so I guess it's possible it could break at some point, rending the firing pin useless (and the gun incapable of firing), but I am unaware of how likely that might be.
@nategaris3457 Жыл бұрын
Good review.
@caseysammobench Жыл бұрын
Thank you!
@willbar1961 Жыл бұрын
These are great looking guns. I have a Uberti that is three click with the floating firing pin, a Great Western (Pietta) that's a true 4 click Colt copy I added a dual groove base pin to to have some form of safety. It's a US Marshal dual cylinder 45acp/45 Colt. Then the Ruger Vaquero Bisley with transfer bar and a Beretta (Uberti) Stampede with transfer bar. Two are safe with 6 rounds and two are iffy. All are great though.
@caseysammobench Жыл бұрын
I just looked up the Pietta. It looks so nice. One of these days I want a Vaquero so I can shoot higher pressure re-loads safely through it. From what I understand rugers have a more hardened frame that can handle the higher pressures.
@willbar1961 Жыл бұрын
The Italian guns have forged frames and are strong but their size limits what they can handle. The old Rugers were larger and could handle 44 magnum easily.
@wendyvic4046 Жыл бұрын
@@caseysammobench the older, ORIGINAL Vaquero has a very strong frame and cylinder. The New Vaquero is closer in size to the SAA. If you get a New Vaquero, do NOT run it with "heavy" +P loads. You can run them with a little more pressure, but nothing near what the large frame Vaquero will run. By the way, that's a beautiful Uberti there.
@caseysammobench Жыл бұрын
Thank you for letting me know. I was thinking about getting one just for the +P loads
@Wildwestwrangler7 ай бұрын
Also the 45 colt cylinder has the same amount of metal at the bolt notch as the 45acp cylinder so will take the same 23k psi pressure. It's just not necessary to go that hot and to have a serious round out of the 45 colt. If your state allows it the underwood or buffalo bore standard pressure loads will ethically kill deer as far as you can put it in the right place. I treat it like bow hunting range wise and I know from experience that my pistol will never not have enough horsepower to perform.
@josephmerkler77786 ай бұрын
You should try an EMF, the GREAT WESTERN II
@caseysammobench6 ай бұрын
Wow! Those are really nice looking. One of these days I'll be able to get back to the channel. I'm a Drill Sergeant in the Army right now and this job is definitely a personal time killer. I appreciate you letting me know about these pistols!
@vanwilder11017 ай бұрын
Would look great with an ivory type grip
@caseysammobench7 ай бұрын
I agree with you. I think it would look really nice. I think maybe with a two-tone and some engraving.
@vanwilder11017 ай бұрын
@@caseysammobenchYep, I also love the shorter 4.75" barrels - this just has great colours, very gorgeous Colt
@denniswiemer728 ай бұрын
You may want to get a set of Wheeler Gunsmith Screwdrivers. They won’t mar your screws if used correctly. And yes, to blue locktite.
@caseysammobench8 ай бұрын
I did a long while back. They're definitely a big help. I already kinda marred the screws unfortunately before I got them. I appreciate you watching the video.
@philipmiller92412 жыл бұрын
Leave the loading gate open and the cylinder will go back in a lot easier!
@caseysammobench2 жыл бұрын
Will do, I appreciate the advice.
@joseywales91012 жыл бұрын
I’d love one of these with the dual 357mag/9mm cylinder.
@caseysammobench2 жыл бұрын
That would be sick. I want another one. I went a different path for now working on the sig P320 though.
@davidgiles46812 жыл бұрын
I have the 9mm Uberti El Patron. I love it. It takes 9x19 ammo (but not +p). It is smooth. I would suggest getting some BLUE AND OR PURPLE - !!!!!!NOT RED!!!!! locktite. put the locktite on the two screws on the trigger guard. I have spoken to others and they have the simlar problem (of those two screws coming loose). Blue or Purple locktite will fix that. The 9mm is extremely accurate. It is fun to shoot. the 5.5 inch barrel is perfect. Most any 5.5 inch holster will fit it. --- Just to advise: if you cock it all the way, the trigger pull is about 2 or 2.5 lbs. That is not much and trigger control is vital. If you get some 9mm snap caps, that will help you train.
@caseysammobench2 жыл бұрын
@@davidgiles4681 thank you I absolutely did the blue loctite about a 1 year ago and have had no issues since. I tested my pull at 2.5lbs as well. In some of the other comments they mention light strikes. Have you had any issue with that? I haven't had any issues with this pistol other than the screws and that's already fixed.
@davidgiles4681 Жыл бұрын
@@caseysammobench no light strikes. Due to the two screws ( on the trigger area) coming loose and lock tighting them - no problems at all. A 2.5 lb trigger is light. But, I have become used to it.
@gvet472 жыл бұрын
I purchased a pair of Uberti Evil Roy and they ened up as junk. Screws fell out from poor tapping. Worse eas not timed correct and lots of hammer sticks off center of primer. No factory help as I wanted to send them back to be fixed. They don't fix there guns.
@caseysammobench2 жыл бұрын
Sorry to hear that. I haven't had any experience with their customer service. I've had a great experience with this particular revolver. For the screws, another commenter said the screw thing is a common issue among most revolvers. A bit of blue or purple thread locker will fix that issue. I had that one screw on the ejector rod always loosen until I did that.
@xTr4c3d2 жыл бұрын
Ive got 2 of them one longer and one shorter barrel. Screws come loose on both of them. Grip/backstrap screws especially so
@caseysammobench2 жыл бұрын
What do you think about the ones with the longer barrel? They are 7.5in right? One of the other people that commented said its a common issues with most revolvers. If you haven't done it yet, the blue loctite is a game changer.
@xTr4c3d2 жыл бұрын
@@caseysammobench I just got the 7.5 inch one i havent gotten a chance to shoot it yet. Both the screws under the trigger guard were loose. The shorter one ive had for a couple years and the same screws came loose as well. I havent tried loctite in case i needed to take them apart
@caseysammobench2 жыл бұрын
@tim laborde I don't blame you. As long as you have the right screw driver head, it should easily come un-done even with the thread locker. You could start with purple thread locker too . Just a tiny dab on each end will do the trick. Lemme know what you think when you get the chance to shoot it and what you think. Uberti has me pretty hooked. Also, is it a 45LC?
@xTr4c3d2 жыл бұрын
@@caseysammobench Both are 45lc. I dont really want to do a 45acp conversion. I like the classic feel i guess. Ill give the thread locker a try on this 7.5 inch one once i get some time to actually shoot it. I work a lot so its hard sometimes
@caseysammobench2 жыл бұрын
@tim laborde for sure. Ammo prices don't help and lack of primers for reloading doesn't help either. I agree with you on the conversion. Only reason I want to try, is to just have the capability to shoot 45 ACP since I don't have one anymore and it is much cheaper than buying a new gun. Work has gotten in the way of my reloading and videos as well. I'm active Army and we have spent a lot of time in the field over the past month. You take care and thank you for supporting the channel.
@clay-r152 жыл бұрын
I got a 45 ACP cylinder for mine from Taylor's and now I like it even better haha 45 long colts way too expensive by me
@caseysammobench2 жыл бұрын
That's interesting. I am gonna do that. Long Colt isn't bad for me now that I have the brass. But I'd like to get two guns out of one. I'll try to find unless you don't mind posting a link.
@clay-r152 жыл бұрын
@@caseysammobench also from what I told the 1873 design can't handle plus keys so only shoot standard loads. I shot herters target loads, Winchester white box range loads, and federal standard velocity hollowpoints. They all shot good and it actually hits right where I'm aiming elevation wise the 45 long colts always hit about an inch or 2 high.
@caseysammobench2 жыл бұрын
Yes for sure. I meant to say that on the video about standard loads. Its one of my earlier ones. Just trying to get used to talking on the video.
@clay-r152 жыл бұрын
@@caseysammobench did you get the link? I posted it in the comments but I don't think it took because it assumes it's spam. Just go on Taylor's and companies website and look at 1873 uberti new model parts it's #5 45 ACP cylinder. Also in my poorly film the video I posted a link in the description.
@caseysammobench2 жыл бұрын
@@clay-r15 very cool! I just checked out your channel. Thank you.
@doranmaxwell17552 жыл бұрын
I have two older ones. One is in .357 mag and is 7.5" barrel... anyone can hit a full soda at 25 yards with the gun.. the other is one I had to order.. 4.75" in 44 spl. With my handloads it will hit a shotgun shell at 20 yards. Screws are soft. fit and finish is excellent. polish and blue are on a par with my old SW guns. Grips are too red for me but I refinished em both in more 'American' walnut. I actually keep the 44 spl on my nightstand cause like all SAA's? it points perfect. Everyone who shoots either gun wants one.
@caseysammobench2 жыл бұрын
@Doran Maxwell, either one of those calibers is bad ass for this pistol. I got mine in 45 mainly because my Henry is 45 Colt as well and its nice to have the rifle and pistol in the same caliber. Contrary to my fairly shitty shooting in these videos, you are dead on. It is a tac driver at 20yds. I use my hand loads as well. I use FMJ 45 Auto projos that I got on one hell of a sale and just developed my own load for them.
@doranmaxwell17552 жыл бұрын
@@caseysammobench Yeah.. I got a Henry in both 44 mag and .357. The 44 spl Uberti shot low which... was good cause I could file the front sight. pretty much dead on now at 20 yards or so.
@carolynpederson69043 жыл бұрын
Love it!!!
@jameswilson14077 ай бұрын
Screws from Uberti are always soft, use properly fit blades when removing them.
@caseysammobench7 ай бұрын
Ya, definitely ended up past that point. I did the loctite about a year before I made the video. I take the gun through a lot of hell and just choose not to replace them.
@Greenjeans20202 жыл бұрын
Don't put you finger on the trigger guard. Causes torqueing to the left.
@caseysammobench2 жыл бұрын
Thank you for the advice. I definitely have a lot to learn about shooting pistols. Hope overall you liked the review though.
@Greenjeans20202 жыл бұрын
@@caseysammobench You're welcome. I have been shooting USPSA and SCSA for many years. Also a CRO (Chief Range officer). I was teaching a friend to shoot a handgun and he had his finger on the trigger guard, Was totally missing the target, He finally took my advice and he had 5 shots in the black.
@spiritualawakenings6251 Жыл бұрын
Everyone knows that only 3 clicks really interferes with accuracy, timing, and all functions of the revolver. I always count my clicks when shooting.
@nunya1328 Жыл бұрын
The new ones only have 3 clicks. Mine shoots and cocks and stays in time perfectly.
@spiritualawakenings6251 Жыл бұрын
@@nunya1328 I was being sarcastic.
@nunya1328 Жыл бұрын
@spiritualawakenings6251 oh haha my bad.
@johnsaia97392 жыл бұрын
Make sure you use the right sized screw driver head to avoid buggering the screws. The screws can be repaired and fire blued.
@caseysammobench2 жыл бұрын
Ya, definitely my fault. It was what I had out in the field at the time. I've since then upgraded the field kit. But since I used the blue loctite. I've had no issues
@DrewB4398 ай бұрын
Nice video! Is that a 4 3/4 inch barrel?
@caseysammobench8 ай бұрын
Thank you! It's a 5.5in barrel
@DrewB4398 ай бұрын
Awesome thanks!
@doranmaxwell17552 жыл бұрын
I need the four clicks.. they say C O L T
@caseysammobench2 жыл бұрын
It's the most important part
@JoseyWales44s Жыл бұрын
One must wonder why Uberti recommennds leaving the hammer on an empty chamber given their new system. Nah, don't have to wonder, it's friggin lawyers. Unfortunatly, the lack of four clicks is a deal breaker for me. I've have a Pietta Great Western that has a great action and the four clicks. Just acquired a Std Manufacturing as well. No comparaison there, the SM is an equal to a Colt.
@caseysammobench Жыл бұрын
Ya, I agree it's definitely a CYA maneuver. I was a bit worried at first to get it but overall it's a favorite in the collection and I believe worth the price tag. I'll look into the Std I've heard a ton of great things. Thank you for watching the video though. It was a very early one in my channel and hope it was at least informative.
@JoseyWales44s Жыл бұрын
@@caseysammobench The video was great. The Cattleman is a beautiful revolver. I do have the Cattleman .22LR 12 shot. It only has 3 clicks but what the heck, it's a 12 shoot'in .22.
@caseysammobench Жыл бұрын
@@JoseyWales44s thanks man. I appreciate that. I'm definitely gonna look into the 12 shot revolver. That is cool af.
@lukas-ik7qe3 жыл бұрын
Cool gun! Pretty old school😊 Btw. I've tried the Federal Gold medal 168gr in the HMR. Could get the groups smaller than 1,5 inches, but I've also tried some cheap 180gr. hunting rounds, which were half MOA😊👍🏻
@caseysammobench3 жыл бұрын
Interesting, I haven't tried anything above 175. I'll give it a shot one of these days. I'm sitting on such a good stock of factory 168gr feds. I get spoiled with my hand loads though. I basically just recreate the same bullet with more quality control. The weather where I'm at has been miserable for the past few months. Either disgustingly hot or dumping rain. Both of which I don't want to be outside much in. So my range time has got pretty bad. Can't wait to get at it some more during the fall. Thank you for watching my videos. Hopefully the quality starts to get better as well. Let me know if there is anything particular you want to see a review on here.
@lukas-ik7qe3 жыл бұрын
@@caseysammobench The weather here is bad too, but at my shooting range the targets are electric, so you dont need to go out there. My likes the RWS 168gr best, but as my local shop doesn't has them in stock anymore, I had to try something different. I'm glas I did, because the 180gr are 30% cheaper 😊 I hope your weather gets better soon, so you can go to the range too! Some longer range shooting would be awesome🤗
@williamheizer18912 жыл бұрын
This firing pin safety in the hammer is a bad design, causing occasional misfires with carefully squeezed triggers. Not dependable !!
@caseysammobench2 жыл бұрын
I think some have had issues. I have had no issues with it whatsoever but I agree. If it's a supposed to be a safety but you should only carry 5 anyways, what's the point of it.
@ordinancesgt67162 жыл бұрын
Pretty cool piece what do you use for a rig to carry that smoke wagon?
@caseysammobench2 жыл бұрын
Love this thing. I use a custom made buffalo leather holster. Had to fit the part, lol. You can see it in the shotgun vs apple video.
@ordinancesgt67162 жыл бұрын
@@caseysammobench I will check it out right now
@carolynpederson69043 жыл бұрын
I want it I want it I want it
@linguisticman2 жыл бұрын
I got one...it's nice!
@Wildwestwrangler7 ай бұрын
Then go get one
@vanwilder11017 ай бұрын
What does this weigh? empty... Thanks
@caseysammobench7 ай бұрын
It has a bit of weight to it, sitting at 2.3 lbs
@myliebiii10 ай бұрын
This is the 4" 3/4 barell, yes?
@caseysammobench10 ай бұрын
It is the cattleman 2 .45 Colt with the 5.5" barrel.
@rmclamb1989 Жыл бұрын
I'm getting the Uberti Hombre in 357
@caseysammobench Жыл бұрын
I want another one in 357. I'll look into the hombre as well. I've been in continuous schools the past year for the Army so I haven't had time to shoot my own guns or make any videos.
@rmclamb1989 Жыл бұрын
@@caseysammobench awesome thanks for your service to our country
@Wildwestwrangler7 ай бұрын
I wouldn't mind having a 357 mag version to accompany my 45 colt, but I do have a Taurus 608 in 357 mag with the 8 3/8 inch barrel. Lotta speed with 357 out of that long pipe and 8 shots to boot!!! Next I am getting a Ruger super Blackhawk 44 mag or super Redhawk Alaskan 44 mag whichever happens first once I save the money.
@Melcop18862 жыл бұрын
You're not holding the gun right. You have your fingers pointing right in front of the cylinder gap....ouch!
@caseysammobench2 жыл бұрын
I appreciate it, at the time not really all that good with pistols. Was trying to hold it similar to the modern pistols and glocks. Thankfully never had my fingers hurt or anything. Suppose I was just lucky and overall just developed some bad habits. Got some good advice through the comments and learned a great deal of info. I appreciate you taking the time to view and comment.
@Melcop18862 жыл бұрын
@@caseysammobench No problem, glad I could help. It's a common mistake for people not use to revolvers. If you ever want to test the danger out, put a piece of play-doh next to the cylinder gap and fire a round. See what happens to the play-doh.
@caseysammobench2 жыл бұрын
@@Melcop1886 that sounds like a video I need to make. Thank you.
@Wildwestwrangler7 ай бұрын
@@caseysammobench hickock45 did it with hotdogs and it wasn't pretty!!! You should test it close against the side of a cantaloupe or watermelon!!!
@edkrumm51972 жыл бұрын
Your shooting accuracy and speed will improve very much if you learn how to properly grip a revolver.
@caseysammobench2 жыл бұрын
Thank you, since the video there has been some great advice on here along with a lot of hours of just study time and practice. Hope you have a happy new year and I appreciate your support on this channel.
@frankcastle11832 жыл бұрын
I love all of mine, however I’ve had to send them all back due to light primer strikes and brass frame cracks. I only use SAA Cowboy loads so I don’t understand the cracks. If you can I’d splurge on a lifetime warranty if your vendor sells that.
@caseysammobench2 жыл бұрын
@frank castle, that is pretty interesting about the brass cracks. I've never had a single light strike or frame issue. I wonder if it's an issue with the lot numbers. Unfortunately I think I'm past the point of warranty on mine. I got it 4 years ago from Cabelas.
@frankcastle11832 жыл бұрын
@@caseysammobench I had 2 new ones I had to send back to back. They were only 2 weeks old. Factory warranty is 5 years
@JohnSmith-sk8hn Жыл бұрын
Re: " I see a rattlesnake and have to take care of it." That's the way the ranchers in AZ have been practicing conservation all along. Because of which most S/E AZ ranch land has been posted for plague since the 1950's, conservative ranchers and others bent on eliminating the dreaded Serpents,have created over populations of disease carrying rodents. They let you know that they are there so just step around them.
@caseysammobench Жыл бұрын
I understand. I don't typically go searching for them. Or would even shoot one if I see it around. The only time I have shot them is if I felt myself or children were in danger.
@DARKSIDEART20222 жыл бұрын
why do you feel you have to kill snakes with it? Do you have any videos of you ever being attacked by one?
@caseysammobench2 жыл бұрын
I don't generally feel I have to. It's truly only been a couple of rattlers that I've come across at the wrong time and in that moment felt I had to use it. No videos though.
@DARKSIDEART20222 жыл бұрын
@@caseysammobench Gotcha- well, maybe think of them as decent, misunderstood creatures, like myself, and maybe you, too. They're really pretty docile, and in my 40+ years of Herpetology, and venomous snake husbandry, I've never had one try to hurt me for no reason..even when they had plenty of opportunity to bite, if they chose. I'm pretty sure you never really ''had'' to kill one for any specific reason. Just putting that out there as a gesture, as I can see we both love nature.
@caseysammobench2 жыл бұрын
@Theodore Tutor thank you, I appreciate that. I think as time goes by we all gain wisdom and such from our decisions, and it's just important to keep learning. I hope you have a great day. Happy Thanksgiving!
@DARKSIDEART20222 жыл бұрын
@@caseysammobench agreed! happy thanksgiving to you and yours~
@worthweant69932 жыл бұрын
The reason he does not, is because he kills them!
@QualityPen2 жыл бұрын
Isn’t shooting a revolver with two hands illegal? It should be. 😉
@caseysammobench2 жыл бұрын
Haha, maybe. It sure is a fun pistol though.
@ricktaylor574410 ай бұрын
My gun is shooting to the right by 3" at 25 yards, do you know how to fix it?
@caseysammobench10 ай бұрын
It maybe your sight picture and or trigger squeeze potentially in combination with the ammo type. Are the groups tight, just 3in to the right? Basically you may just be pulling a tad to the right as you shoot. You just do it consistently.
@ricktaylor574410 ай бұрын
@@caseysammobench yes the groups are tight at around 2" at 25 yards. I can keep my shoots in a 1.5" bullseye at the same distance with my 44 Ruger super Blackhawk. I reload my cast bullets and have been doing so for over 40 years. Thank you for the reply and advice .
@caseysammobench10 ай бұрын
Np, it sounds like you're a pretty great shot with them all. I can't imagine the sights are that far off, but I'd say maybe a gun smith can check it out to confirm.
@Wildwestwrangler7 ай бұрын
@@ricktaylor5744if it's the gun a Smith can either bend the blade, I don't recommend that or you can have the barrel turned just a bit.
@Wildwestwrangler7 ай бұрын
@@ricktaylor5744I'd try grip and technique first. Mine shoots to the left with some ammo and not with others, but I've learned how to adjust the sights picture to compensate so it shoots straight. With cast bullets I have to put the front blade against the right edge of the rear notch. My groups are between 2 and 3.5 inches at 25 yards depending on the load
@reliom983610 ай бұрын
My Uberti "Cattleman" makes 4 clicks....
@caseysammobench10 ай бұрын
Mine is the cattleman 2. I know the one made four clicks
@reliom983610 ай бұрын
Yes
@mypetvelociraptor6 ай бұрын
You have to take care of the rattle snake was it between you and your car so you had no choice. I just walk around them
@caseysammobench6 ай бұрын
I have adjusted my attitude towards snakes as of late and now do my absolute best to ensure their safety. Even though they terrify me still. I'm sure my fear of them is only a perceived fear of getting bit. A lot of it was up close shock from the rattles and them striking at me while hunting in MT. I appreciate your comment and view of the video and just wanted to let you know that I do consider and value their life regardless of any past action taken.
@mypetvelociraptor6 ай бұрын
@@caseysammobench That sounded a little harsher than I meant it. Great video though. Beautiful gun.
@geob03242 жыл бұрын
Two hits out of five shots. Looks like you either need to tune the gun or get new glasses. :-)
@caseysammobench2 жыл бұрын
Lol, so this is one of my first videos. I was pretty nervous about being on camera and talking to the world about this stuff. It wasn't really about hitting the gong. I just wanted you guys to see it shooting close up. I was behind my fence in a drainage ditch type thing and the mosquitoes were unbearable. I was wearing a bug net hat and my hands were getting the blood sucked out of them. I was just wanting to get out of there, lol. I'm happy I posted though. I got some really good advice on how to hold a revolver vs a modern striker fired pistol. Hope that gave you some insight on the video, lol. Take care and hope you enjoy some of the other content. I really look forward to making these and I want to provide you guys with the content that you want to see in a firearms channel. I've recently started working with Adobe premier and trying yo get better at the editing process.
@AliasMark69 Жыл бұрын
Fix the dripping water.... just sayin
@caseysammobench Жыл бұрын
I think my hearing sucks I'm not quite sure where in the video the dripping water is. Also this is a pretty early video. Since then I've got an actual mic for the phone and just recently got a new camera and mic to help with the clarity and audio. But I'm up here in airborne school for the Army right now so no more videos for a few more weeks. I appreciate you taking the time to comment on the video. Hoping to grow the channel much more and bring you guys some solid gun reviews.
@jimpolicke76399 ай бұрын
SASS stands for Single Action Shooting Society! SMH
@caseysammobench8 ай бұрын
Interesting. I thought in this scenario they were referring to it being a Single Action Short Stroke revolver because thats what it is. Thank you for letting me know what they were referring to.
@Wildwestwrangler7 ай бұрын
@@caseysammobenchyours is not a single action short stroke it's a single action army.
@spiritualawakenings62512 жыл бұрын
A Colt revolver is totally useless without the 4 clicks. It throws off the timing, balance, and effects accuracy. All you have left is a look alike.
@caseysammobench2 жыл бұрын
@spiritual awakenings, from what I understand is, it is definitely not a Colt. However, my experience with it is really good. The few missed shots in the video are kinda misleading. I was shooting about 30yds at an 8in plate, trying to hold the gun in the right position in front of the phone, and wearing a bug net over my head as I was being eaten alive by mosquitoes.
@caseysammobench2 жыл бұрын
Also, thank you for your comment. I do appreciate your support on the channel and taking the time to watch the video.
@caseysammobench2 жыл бұрын
The next question is, how does all that get thrown off without the 4 notches? A lot of revolvers such as many rugers don't have one.
@spiritualawakenings62512 жыл бұрын
@@caseysammobench Honestly I was just being sarcastic. KZfaq is becoming nothing but reruns. Every video out there on the SAA mentions those 4 clicks so they should be pretty important. There is absolutely nothing new to share or show on the SAA. Just being honest again there is nothing left on them that everyone doesn't know just as everything else not even pertaining to firearms. I have been shooting and repairing these things for 46 years and knew all about them long before KZfaq but I am always hoping someone can come up with something new or different but there is nothing left. Perhaps you will be the one to change all that.
@caseysammobench2 жыл бұрын
Lol, I appreciate the sarcasm. You are right. But I believe that goes for pretty much anything on youtube. The 4 click thing is just important to a lot of people is why it's consistently mentioned in videos. As my channel grows I would like to challenge the norms and provide that missing piece to firearms videos. It is definitely tougher than I thought. Especially with the lack of ammunition and reloading components. And as they come back, the outrageous prices. I guess the take on this video was to be able to see it shooting and some better quality close ups of it for potential buyers.
@hoghunter6872 Жыл бұрын
Just can’t beat colored case hardening
@caseysammobench Жыл бұрын
I love the color. It's definitely beautiful upclose