Thanks, first time cleaning my 320 and needed to know how to get the trigger pack out! I appreciate your video!
@caseysammobench11 күн бұрын
Thank you for your support and for taking the time to leave a comment! I really appreciate it.
@elprimo_5.5621 күн бұрын
Will that Bobro plate work for a Holosun He407c X2???
@caseysammobench21 күн бұрын
As far as I know it has an RMR footprint it should be g2g. My 508t has the same footprint.
@johnhatchel968123 күн бұрын
My M 18 was cut for a Deltapoint Pro so that's what I went with. I did put a Holosun 507K on my P365XL it's a good optic.
@caseysammobench23 күн бұрын
I was pretty close to going with the dp pro, it just wasn't in the budget at the time. I really like the selective reticle on the holosun as well. Only downside is the front sight isn't tall enough after adding the adapter plate to co-witness
@Reepa008Ай бұрын
Do your slide moves forward a lil bit after you dry racket without the magazine??? Cause mine does I'm trying to figure out is that normal
@caseysammobenchАй бұрын
Mine doesn't. Is yours new and maybe just need to break in a bit more?
@Reepa008Ай бұрын
@@caseysammobench yeah it's new just got it Wednesday never shot it just was checking it out at home
@Reepa008Ай бұрын
@@caseysammobench but it dint do it when I chamber a round
@caseysammobenchАй бұрын
@Reepa008 interesting. Thank you for commenting that. I'm certain if it happened to you, someone else has experienced it before. It could have just needed some oil or any number of things I guess. But this is the first I have heard of that. Also, I know the spring on the 320 is tougher than others. They recommend around 1k rounds threw it to break it in. With all the junk on mine while it being new. I had some troubles cycling it. So I switched to a lighter spring and it has worked out great ever since. I believe it was DPS performance or something along those lines.
@Reepa008Ай бұрын
@@caseysammobench okay
@lettuceishere9125Ай бұрын
Thank you, this is the best video for reassembly and disassembly for the P320. Holes go up from now on
@caseysammobenchАй бұрын
Thank you for watching and taking the time to comment!
@deerhearseАй бұрын
Just picked up a 5.5 inch and really like it.
@kbailey9156Ай бұрын
I have been told by other more experienced and knowledgeable p320 owners as well as from vids from other gunTubers like yourself, to never release the slide from battery without a loaded and seated magazine, and that doing so can permanently damage the more fragile parts of the slide, (i.e. the firing pin, etc.). I don’t recall which creators video it was, but if my memory and logic serve me, the chambering of round provides the slide with needed resistance and protecting it from damage. I’m gonna go and try to find the video right now. Don’t trust me, you all should do the same. & Thank you for a great video by the way…
@caseysammobenchАй бұрын
I have seen multiple things on if you should or should not. From the APEX trigger install video, directly from APEX talks about it. And since I have been doing it this way. I have not had a single issue with the pistol. I am not just letting it slam forward on empty all the time. I can't imagine the few times I do it per year after cleaning, it would cause any amount of damage.
@caseysammobenchАй бұрын
Also thank you so much for leaving your comment. I truly appreciate the time you took to do that. I'm glad this video is helping so many Sig shooters get back at it.
@johnyoung6809Ай бұрын
Same thing with incorrect orientation of guide rod happened to me today. Was making me 😫😡. Serves me right not coming to YT first. Same stubbornness resulted in messing up on last new firearm reassembly too. I never learn😂…Thank you!
@caseysammobenchАй бұрын
Np! Glad you found the video.
@obsidian2404Ай бұрын
In regards to the oval part.. the holes need to be verticals but I noticed on that plate with the holes there is a small dimple on one side, does it matter which side it’s on? Does it matter? Or it doesn’t matter so long as the holes are vertical and not side to side I have the CA model if that matters?
@caseysammobenchАй бұрын
I don't think it matters. Just the plate being vertical is all.
@caseysammobenchАй бұрын
Also, I just noticed you said you had the CA model. I'm not sure what kinda crazy stuff they do. I'm as far away from Cali as possible in GA. Sorry for the late response. Did you find anything else in your research, though?
@obsidian2404Ай бұрын
@@caseysammobench yes I did the dimple placement is irrelevant it can be on either side it doesn’t matter however as I said before it does need to be placed vertical not horizontal it is to my understanding this dimple is just leftover from the manufacturing process nothing more
@donne9768Ай бұрын
Good video! Knowing what I've learned after owning my Cattleman II for a few years, the first things I would have done is install the Wolff springs in it, and blue Loctite most of the screws. I found an ACP cylinder for it on the bay, and had my gunsmith fit it. It shoots great with ACP, maybe a little more accurate and definitely cleaner. It's a blast to shoot, but I most enjoy in while setting in my recliner and watching INSP. lol
@pezarmyАй бұрын
I personally just want to say a massive thank you for showing the oval part having to be up and down... I kept running into the issues part, came here, saw that... and it got fixed... thank you so much
@caseysammobenchАй бұрын
Thank you for watching! I'm glad to see the video helping so many.
@robertgrant38442 ай бұрын
Just out of curiosity, has it occurred to you, to try to communicate to the viewer something interesting or useful? Sometimes shooting videos are so bad that they are funny. But in this case, you do not not rise to that level. You provide just boring nothing. Truly, the background sound of rifle report and the foggy scenery were more interesting to me than struggling to figure out wtf you are doing. Todd is shooting a bolt action rifle with a scope and his buddy went to deficate (take a dump). It took you 23 minutes to explain you had hand-loaded your loads, and it seems you had half-inch minutes of angle at 100 yards. But really, without you telling us what was your powder or your bullet weight, what the hell difference does it make to anyone what your bullet seating depth or powder weight was? I’ve been shooting rifles over 50 years and hand loading for over 15 years. You just wasted my half hour with nothing. When I die and go to heaven, and I am asked to account for my life, I will say that I am sorry I watched 30 minutes of Casey’s Ammo Bench. Forgive me, Lord.
@caseysammobench2 ай бұрын
Thanks for taking the time to write that and apparently watching the whole thing.
@robertgrant38442 ай бұрын
Thank you for your feedback. I appreciate that you strive to produce firearms content with an emphasis on hand loading. You have built a good foundation. And I look forward to seeing you communicate informative content.
@caseysammobench2 ай бұрын
@robertgrant3844 thank you. I understand it's not perfect. This is also a very early on video. I think at that time, and even now, I'm just trying to get used to being on the camera and getting content out there. I think that maybe your original comment was a bit harsh. But, I understand and want to do better. Especially once I retire and have the time to get better.
@dlofromdatraq2 ай бұрын
watch 10 vids and couldn’t get my firearm to work what so ever , your vid the only one that worked for me 💯
@caseysammobench2 ай бұрын
Thank you! Same thing happened to me is why I made this. Thank you for supporting my channel.
@donaldknight42022 ай бұрын
I have the same trigger and I have mine set to 4 ounces. Works great for me.
@caseysammobench2 ай бұрын
I believe that is what mine is. It feels great and I have really enjoyed flat face triggers over the last couple of years.
@MrJD240sx2 ай бұрын
At this point I’ll rather just save for the Romeo pro 1 the holocaust with the plate is almost the prices these plates should be cheaper 120$ for a plate ? Hell no lol
@caseysammobench2 ай бұрын
I do think that he plate being 120 or so is pretty ridiculous. If you get the RPH let me know what you think of it.
@betlogenako71933 ай бұрын
My trigger is hitting the frame lol cant take it out
@caseysammobench3 ай бұрын
When you go to take the fcu out. Make sure the safety is off, and you press in on the trigger as you rotate it out, lifting up on the rear of the FCU. Hope this helps. I had the same issue.
@chadshultz32713 ай бұрын
id like you to show the finished product before the acrylic paint part, how you cleaned it after, how you prepped before, then how you painted it
@artcantulaw3 ай бұрын
Am I the only one saying I wish that guide rod reassembly part was more descriptive. Such as the oval should be inserted tall vertical or sideways. A drawing or somw more close ups. I never saw a clear camera angle.
@caseysammobench3 ай бұрын
It's definitely supposed to be vertical. I believe I mentioned it. Either way I hope the video did help.
@caseysammobench3 ай бұрын
I would have responded much sooner but somehow the comments are sometimes taking a day to show up on my notifications.
@elmatador14004 ай бұрын
Just picked up my sig today, needed some help with the optic. Awesome I found f this video 🫡. Great help. Did you ever upgrade your trigger ?? Saw the other vid about you were going to add an apex trigger
@caseysammobench4 ай бұрын
I did upgrade it. I tried making an install video for it. But it sucked man. Apex has their own install video and it's amazing. No use competing with that. I thought about doing an update video. If that's something you would want to see. I've been almost non existent for a while because I'm a Drill Sergeant over here at Fort Moore. Any time I get off, I'm pretty much a zombie or working on house projects.
@elmatador14004 ай бұрын
Awesome vid 🫡
@caseysammobench4 ай бұрын
Thank you
@me109g44 ай бұрын
Removing the slide release/takedown lever is a royal pain. Both my new FCU's fought hard coming out the first few times.
@caseysammobench4 ай бұрын
Mine too. I think once it's worked in a bit it gets a lot easier to do
@irafowlerjr.74924 ай бұрын
Very helpful, thanks
@caseysammobench4 ай бұрын
Very welcome. Hope this video gets easier to find for people. I'm not a huge channel or anything.
@mrg313324 ай бұрын
Looks great!!! Did you have any problems with the loaded chamber indicator?
@caseysammobench4 ай бұрын
Thank you! No issues at all
@Ghost059004 ай бұрын
What plate is that ??
@caseysammobench4 ай бұрын
It's the bobro engineering plate
@richardomendez64804 ай бұрын
Update: The take down leaver won. I lost.
@caseysammobench4 ай бұрын
Oh, no. It's an asshole sometimes.
@Nuclearbomb-lw4ri5 ай бұрын
I always put the oval spring back in sort of like how you do a Glock. I always forget that the oval has the flat piece that goes flat against it. Thank you for this video.
@caseysammobench4 ай бұрын
You are very welcome, I had fun making it.
@danfigueroa41245 ай бұрын
Thank you. Damn vertical holes
@caseysammobench4 ай бұрын
Haha, they got me too. It took over a week to find a video that mentioned it. Figured others might be in the same boat.
@darrenwatson97115 ай бұрын
What’s the name of the scope
@caseysammobench5 ай бұрын
It's a Vortex Viper PST gen2 5-25x50 in First Focal Plane (FFP) with MRAD adjustments.
@terrytilson92015 ай бұрын
I have the cimorron ssa 7.5 inch barrel and it has the 4 clicks I bought it at a gun shop about 3 weeks ago and I love it
@GR-ut7gk5 ай бұрын
It amazes me that people don't know KZfaq exists to take apart their firearms. It's people like you that save lost souls like them. Fantastic video man thanks for the help.
@caseysammobench5 ай бұрын
Thank you! Np. I can't wait to make more videos regarding this stuff. Right now, I'm a Drill Sergeant with dang near zero time to make any.
@user-rq2yk3rr6v5 ай бұрын
Is that an Apex trigger ?
@caseysammobench5 ай бұрын
Yes it is. The trigger feels much more crisp. The weight sits just above 4.5 lbs.
@user-rq2yk3rr6v5 ай бұрын
@@caseysammobench put the apex trigger kits on my Glock 43x and 19x makes all the difference in the world! May put one on my M17 or M18 or both!
@caseysammobench5 ай бұрын
@user-rq2yk3rr6v this is my first apex trigger. I feel like it was a game changer on this pistol. I still suck at shooting but it's way more comfortable, lol
@user-rq2yk3rr6v5 ай бұрын
@@caseysammobench I bet there is a lot more people out there that suck a whole lot more than you think you do!
@caseysammobench5 ай бұрын
@user-rq2yk3rr6v lol, your right. I'm not that bad. I managed to qualify 31 out of 30 on my Army m17 qual multiple times. 31 targets pop up and you have 30rnds. I figured out that I can get a double kill on one of the iterations. I need to make an update video. But this Drill Sergeant life is taking up every bit of time I have. I have a wilson combat grip and a TLR8-G on it now. The laser is pretty sick.
@josephmerkler77786 ай бұрын
You should try an EMF, the GREAT WESTERN II
@caseysammobench6 ай бұрын
Wow! Those are really nice looking. One of these days I'll be able to get back to the channel. I'm a Drill Sergeant in the Army right now and this job is definitely a personal time killer. I appreciate you letting me know about these pistols!
@bkwil60786 ай бұрын
Never let your slide slam forward like that unless it's chambering a cartridge
@caseysammobench6 ай бұрын
It's actually recommended in this pistol to use the slide lock lever and let it go forward.
@Killa911156 ай бұрын
Thanks brother this helped out a lot.
@caseysammobench6 ай бұрын
You are welcome! Glad it helped.
@williamhatchjr23076 ай бұрын
I'm glad to see that I wasn't the only one who had problems, because of the @#&$!/ guide rod....
@caseysammobench6 ай бұрын
Dude, it took dang near a week of watching videos to find out what the issue was and none said anything about it for like 20min. It's what prompted this video. I really appreciate you watching and taking the time to leave the comment
@williamhatchjr23076 ай бұрын
I got my M18 a little less than a year ago and have LITERALLY been getting lucky in getting it back together. Thank YOU for making the video.
@mypetvelociraptor6 ай бұрын
Subscribed. Just leave those poor danger noodles alone.😂😂😂😂😂👊
@caseysammobench6 ай бұрын
Thank you much, I will lol
@mypetvelociraptor6 ай бұрын
You have to take care of the rattle snake was it between you and your car so you had no choice. I just walk around them
@caseysammobench6 ай бұрын
I have adjusted my attitude towards snakes as of late and now do my absolute best to ensure their safety. Even though they terrify me still. I'm sure my fear of them is only a perceived fear of getting bit. A lot of it was up close shock from the rattles and them striking at me while hunting in MT. I appreciate your comment and view of the video and just wanted to let you know that I do consider and value their life regardless of any past action taken.
@mypetvelociraptor6 ай бұрын
@@caseysammobench That sounded a little harsher than I meant it. Great video though. Beautiful gun.
@mikewilliams79856 ай бұрын
Thanks man. Farted around for 20 minutes not knowing about aligning the circles. Went right back together.
@caseysammobench6 ай бұрын
Np. Glad it helped and thank you very much for stopping to leave a comment. It's been a long time since I have pushed a video out due to the insane amount of work being a Drill Sergeant. But this video is pretty much carrying my channel right now and I can't wait to make more.
@timrai21006 ай бұрын
4:44 you can hear his son getting beat…….. ……. He had it coming.
@caseysammobench6 ай бұрын
Haha, I can assure you that no children were harmed in the making of this video. I should have put that disclaimer on there. He just really wanted in the room but would be quiet at all, so I locked the door.
@alvarodebazan79977 ай бұрын
Hola, gracias por compartir el vídeo. ¿ Sabes cual es la diferencia entre el cañón de 24 pulgadas del HMR y el cañón de 20 pulgadas del HMR wilderness, ambos en calibre 308?. Tengo entendido que el cañón de 24" lanza el proyectil a 861 metros/segundo y el cañón de 20" lo lanza a 826m/s pero habría que comprobarlo en una diana a 1000 yardas y ver las agrupaciones de uno y otro rifle para compararlos.
@caseysammobench7 ай бұрын
I'm not too sure of the comparison. From what I understand, Bergara stopped making 24in barrel .308 HMR a while back. I'm not sure if they started making them again, but I do know there is no issue with the 20in reaching 1k yards. I have pushed the range to 1,035 yards with 168gr federal gold medal bthp. Hope this helps and thank you for the comment.
@alvarodebazan79977 ай бұрын
Thank you very much.
@alvarodebazan79977 ай бұрын
@@caseysammobenchvivo en el norte de España. Hace unos días fuí a una armería y compré un rifle Bergara B14 wilderness HMR en calibre 308 de 20". Tardará un mes en llegar. También compré un bípode Harris, un visor Vortex Venom 5x25-56 y una base de 20 moas. Estaba un poco preocupado por ser el cañón de 20 pulgadas y que el visor tenga problemas para corregir la caída del proyectil si quisiera disparar a mil yardas pero como tú me has explicado, no tiene problema para alcanzar esas distancias. Muchas gracias.
@caseysammobench7 ай бұрын
@@alvarodebazan7997np, that's a great setup!
@ronngohann7 ай бұрын
Thank you so much bro, I was having issues with the trigger after assembling the gun, thanks to this video I figured it out 💪🏾
@caseysammobench7 ай бұрын
Thank you for watching, and subscribing and also letting me know it helped. Glad to see that it is helping so many people!
@jordanreynoso52507 ай бұрын
Be aware if you live in CA there’s a mechanism in the mag well you have to engage to pull the trigger back and get the FCU out. Hopefully that saves some frustration 😅
@caseysammobench7 ай бұрын
Thanks for letting me know. I don't live there but have shot Cali compliant guns there and it is such a pain in the ass.
@TheGuyWhoAsked727 ай бұрын
My baseplate is leaking how do I fix that
@caseysammobench7 ай бұрын
Interesting. I'm not exactly sure what you mean by leaking. Could you elaborate on that?
@TheGuyWhoAsked727 ай бұрын
@@caseysammobenchI fixed it you have to pop of the plastic bottom of the mag and tighten a bolt
@larrywalden6267 ай бұрын
Sucky video
@LVR_GUY7 ай бұрын
20 watt?
@caseysammobench7 ай бұрын
This one is the 10w, I now have an s1 40w
@user-ll5td5ci1u7 ай бұрын
Thanks for your video. Totally helped me install my sight!
@caseysammobench7 ай бұрын
That's great! I appreciate you taking the time to watch and leave a comment here. Have fun out there shooting!
@kennethfountain61537 ай бұрын
You did not edit our your misses on the green Baloon fyi
@caseysammobench7 ай бұрын
Lol, I wasn't going to. I know I'm not the best shot out there or anything. I had a lot of fun making the video that day though.
@Linksdad7 ай бұрын
I don’t get it. This is for a longer barrel? Why?
@caseysammobench7 ай бұрын
Attach compensators or suppressors
@jameswilson14077 ай бұрын
Screws from Uberti are always soft, use properly fit blades when removing them.
@caseysammobench7 ай бұрын
Ya, definitely ended up past that point. I did the loctite about a year before I made the video. I take the gun through a lot of hell and just choose not to replace them.