Unboxing And Testing Cheap Small Lathe WM210V-S

Рет қаралды 88,929

Жыл бұрын

📢 #HandmadeCreativeChannel📢
📢 Subscribe My Channel - / @handmadecreativechannel 📢
Hello friends. Today i will show you Unboxing And Testing Cheap Small Lathe WM210V-S. I have been looking for a small lathe for the workshop for a long time. After much looking and reading about the machine, I chose this one. I was pleasantly surprised. The video is not sponsored, I just bought the machine and decided to show it to you. I hope you like the video.
You can see the specification of the machine in the video.

Пікірлер: 56

@ErCanEverything Жыл бұрын

I love compact machines and lathes are one of my favorites.😍 This lathe looks perfect my Friend and Thank you for showing us.🙏🍀🍀🍀 As I understood, can be make a thread from 0.5 to 3 mm?

@HandmadeCreativeChannel Жыл бұрын

This is the step of the threads. My friend thanks for the coment👌🍀☺️

@ismulartymuis-yg2zr 7 ай бұрын

@@HandmadeCreativeChannel , Please provide the address and contact number of the dealer/distributor of this lathe, for Indonesia.

@ascombate5803 6 ай бұрын

Is posible male thread milimetric?

@oveschleisner-meyer8139 2 күн бұрын

Hello - Nice video.... but why do you have to put something under the cutting tool...? Shoulden't the center line and the cutting tool be adjustede from the factory?

@bigbob1699 3 ай бұрын

Law #1 loose the long sleeves.

@sddiymakeitworthit7512 Жыл бұрын

Nice and welcome to your workshop 👍

@HandmadeCreativeChannel Жыл бұрын

Thanks brother👌🍀

@ismulartymuis-yg2zr 7 ай бұрын

@@HandmadeCreativeChannel , Please provide the address and contact number of the dealer/distributor of this lathe, for Indonesia

@liukang81 5 ай бұрын

Hey sir! I like your wm210v . I just got mine last week. It’s working great,only a few threads options did not work for me. Can you do me a favor? I have a bit of problems on thread pitch of 1.25mm . When I was change the gear according to diagram on the has shown us. I have tried exactly as it’s said, but it’s came out the first ran of 1.25mm tested was right pitch,and then I added the depths cuts it cut defer off cut ! I don’t know why? If you know what was or you got some clues please help me out sir! Thank you so much. God bless you!

@nasoran Жыл бұрын

Пожелавам ти да те слуша и радва машинката и много успешни бъдещи проекти.

@VetvsWorld 5 ай бұрын

I find myself wondering whether I need a lathe now. Thanks for nothing. 🤣

@ascombate5803 6 ай бұрын

Halo is posible make thread milimetric?

@wladimirlopes5841 Жыл бұрын

O que achou do torno.Pequeno demais ou no tamanho certo

@FixitEasyDIY Жыл бұрын

That would be very useful tool for you 😉

@HandmadeCreativeChannel Жыл бұрын

Yes my friend 👌☺️🍀

@ismulartymuis-yg2zr 7 ай бұрын

@@HandmadeCreativeChannel , Please provide the address and contact number of the dealer/distributor of this lathe, for Indonesia.

@BedsitBob 4 ай бұрын

Probably a good idea to completely remove the chuck jaws, clean them, and lubricate the scroll and the bottoms of the jaws, that engage with the scroll.

@MW-tg6jp 3 ай бұрын

I like the large bore for a small machine. 5 morse taper

@ericmahoney9357 Жыл бұрын

Cool video I'm just wondering you said it has a 38mm spindle bore, does that diameter continue through the machine to the hole at the back for long items?

@jimbarchuk Жыл бұрын

Yes, the way you described it, that is what that spec means.

@elysianbike 3 ай бұрын

I'd love to see a follow up video now that you've had the lathe for almost a year.

@pierrealexandrejamet309 18 күн бұрын

hello I would like to buy this tour. but I have a question please: the auto feed screw can it move in both directions of rotation? thank you

@michaelbaykara2322 Жыл бұрын

I see you just got this lathe, i think this is the one i want to get, how do you like it so far? Thanks for showing the test cut.

@abzyberdy 6 ай бұрын

If you still didnt got one. I got one last week. And it is very well build compared to what i know abot this model from russian and german forums. I will add electronic lead screw to this definitly.

@user-bj9sy8gd4w 8 ай бұрын

Hello my friend. How can I get such a lathe and how much does it cost? Best regards

@Dassick89 2 ай бұрын

basically the same model as a Vevor mx-210V. Just go onto their website.

@victoragresti8760 6 ай бұрын

So..., where does one buy that wm210v-s lathe shown in your video?

@drumtwo4seven 5 ай бұрын

It's on Amazon and AliExpress

@rlewis1946 Ай бұрын

@@drumtwo4seven Thanks for the info. From what I saw in this unboxing and first chips, it seems like a decent machine.

@laplam9366 11 ай бұрын

Gia ban Bao nhieu?

@brianrutherford9074 2 ай бұрын

Where did you purchase this lathe?

@paulmontgomery2726 4 ай бұрын

A whole new technique in appraising a tool and good to see a deaf, mute person giving it a go. In his silent world and totally wrapped up with protective garments to protect his skin from the modern world, I'm sure he is very happy in his achievement with this video.

@sasapesic2728 17 күн бұрын

Koja je cena i gde se moze poruciti,adresa

@Short-HHJ Жыл бұрын

Price

@Khalid337b 5 ай бұрын

Where did you buy it?

@Khalid337b 5 ай бұрын

@_gkworkshop Жыл бұрын

🤝🍀🍀🍀

@HandmadeCreativeChannel Жыл бұрын

Thanks brother 👌☺️🍀

@ismulartymuis-yg2zr 7 ай бұрын

@@HandmadeCreativeChannel , Please provide the address and contact number of the dealer/distributor of this lathe, for Indonesia.

@fodor7069 Жыл бұрын

The one I “bought “ has many “Chinese ,quality problems” ie. sintered gears that devolved , rapidly. Hopefully you have more luck.

@HandmadeCreativeChannel Жыл бұрын

I agree with you, but everything is flattering are normal with small improvements. Parts in my region have, and are pretty cheap.

@ismulartymuis-yg2zr 7 ай бұрын

@@HandmadeCreativeChannel , Please provide the address and contact number of the dealer/distributor of this lathe, for Indonesia.

@LukitoNjudak2-fz1cs Ай бұрын

Mesin impian dan masih belum terbeli karena faktor ekonomiku rendah.

@GVPARTS 6 ай бұрын

Ive had one for a year, every where you look there is problems . Vibrations over 600rpm, tailstock does not match center height of the spindle, mods needed. 3 jaw chuck will not spin true. Speed control knob may keep spindle spinning even when turned to zero. Cross slide is unstable, compound slide travel 23.mm. Compound slide gib adustments not consistant. Way too much play in the feed screw 1/2 turn before movement. Cross feed the same. Cross feed slide gib adjustment not consistant i.e. adjust at one end will be tight or loose at the other end. Carriage not aligned to feed screw so when you engage the feed screw it binds and lift the when tightened. There is so much more but I'm tired of writing. Really you need another lathe and a Mill to fix it all.. With all of these problems I'm glad I bought it. It functions just well enough to get small jobs done. Also If you want to be able to do anything slightly complex you will need to spend much more than the cost of the lathe on accessories & additional tools. A fun and expensive hobby . Cheers!

@HandmadeCreativeChannel 6 ай бұрын

Hi friend, thanks for your comment. Yes it really is! I made a lot of improvements and adjustments to everything. Now there is no vibration and it works normally, but you really have to take the time to adjust it.