The Easiest Resin 3D Printer! Elegoo Saturn 4 Ultra $399

Рет қаралды 90,772

Ай бұрын

Checking out the brand new Elegoo Saturn 4 Ultra Resin 3D Printer for $399 that has a tilting vat for faster prints!
Thanks to Elegoo for Sponsoring today's video!
Saturn 4 Ultra - bit.ly/Saturn4Ultra
Saturn 4 - bit.ly/Saturn4UJ
Neptune 4 Plus - bit.ly/Neptune4Plus
Neptune 4 Max - bit.ly/Neptune4Max
New PLA Colors - amzn.to/3tKK24A
Neptune 4 Pro $299 ➜ bit.ly/Neptune4Pro
Neptune 4 $259 ➜ bit.ly/Neptune4
NOW ON AMAZON ➜ amzn.to/44kLsiJ
Mars 4 Ultra $309 ➜ bit.ly/Mars4Ultra
amzn.to/44TKn1r - Amazon
Mars 4 $259 ➜ bit.ly/ElegooMars4
Saturn 3 Ultra 12K $499 ➜ bit.ly/Saturn3Ultra
Saturn 3 12K $399 ➜ bit.ly/ElegooSaturn3
Files from todays video
Miniatures by Loot Studios
lootstudios.com
Hellboy & Dune Bust by Fotis Mint
thangs.com/designer/FotisMint
Forest Skull by LaternLore
thangs.com/designer/LanternLo...
Venom Bust by HarperCrafthall
thangs.com/designer/HarperCra...
90 Degree Right Angle Bracket
www.printables.com/model/2806...
Sharpie Pen Holder
www.printables.com/model/2473...
MY PATREON / My 3D Printer Settings ➜ / unclejessy
Make your own Resin 3D Printing Timelapses with Resinlapse ➜
linktr.ee/resinlapse
Some links on this page are affiliate links that help out the channel.
________________________________________________
My PATREON ➜ / unclejessy
Buy Me a Coffee ➜ www.buymeacoffee.com/UncleJessy
_______________________________________________
Gear I'm Using ➜ www.amazon.com/shop/unclejessy
________________________________________________
Twitter ➜ / unclejessy4real
Instagram ➜ / unclejessy4real
Facebook ➜ / unclejessy4real
KZfaq ➜ / unclejessy
________________________________________________
Thanks for watching!
#3DPrinting #Saturn4Ultra #UncleJessy

Пікірлер: 260

@jordangage3677 Ай бұрын

Wow, this is making me want to get back into resin printing. This fixes 90% of the issues I had with using my Saturn 2. Thanks for the video!

@UncleJessy Ай бұрын

No joke this takes away a lot of the headaches people have with it.

@theromeog Ай бұрын

I am in the same boat - Have a S2 - Just preordered the S4U

@djngnear Ай бұрын

Same here! Looks awesome

@Nightmarenightmarenightmare69 Ай бұрын

What problems did yall have. Been using my Saturn 2 since release and could not be happier

@VandalBee Ай бұрын

Huge opportunity missed by not adding a heated vat. It would have been perfect...

@theaviestofcados6017 3 күн бұрын

It's been about 3 or 4 years since I've looked at resin printers (I landed on getting the Mars 2), and the leaps and bounds that the Saturn 4 has done at that price point is incredible. I am truly amazed.

@coder543 Ай бұрын

It would be cool if you showed a more detailed guide of how you clean and postprocess your prints, since the whole tray can't fit into the wash and cure station.

@Anthonym_323 Ай бұрын

Look at his previous videos, he’s done a few already

@lanzer22 13 күн бұрын

My only hesitation is the build plate. If resin gets inside the hollow portion and the spring mechanism start getting stuck, having to take it apart and cleaning it will be a pain. This build plate is a great candidate for a magnetic build plate. Too bad they generally don't work well for large format printers.

@newmonengineering 12 күн бұрын

@lanzer22 because of the plate design I think you can squeeze several strong magnets in between the plates and make it work. If you get strong enough magnets it will probably hold the metal plate, because the tilting bed will have way less suction resistance.. if anything you could probably design a plate with holes for magnets and glue them into a small thin retainer upper resin print. I plan on using my cnc and making an additional plate hopefully that will have some sunken magnets. Can't wait for them to ship it!

@lanzer22 11 күн бұрын

@@newmonengineering true that there will be less pull force on the plate. Will definitely experiment with different magnets to see what works. There is a lot of room above the plate for resin clearance so we can put some hefty magnets in there. Though cleaning in between resins would be nasty if I put too many magnets everywhere

@rrwholloway 27 күн бұрын

This looks like the one to buy. The amount of fiddling and settings adjustments I've seen with these various printers has been what's been holding me back. Never underestimate the pull of something that 'just works'

@Resonant_Cosplay 20 күн бұрын

Bed leveling has always been my main issue (that and resin spilling)😅 This is amazing and I'll definitely have to grab this printer! Uncle Jessy never disappoints with these videos!

@shredsnotdead 21 күн бұрын

Saving money to order one of these soon. This looks amazing for the price range and features.

@jimhavoc 9 күн бұрын

I preordered mine and can't wait to get back into the hobby. Thanks for the info!

@FauxHammer Ай бұрын

The speeds on this are insane and it doesn't look like much compared to the Saturn 3 Ultra, but as you said, when you consider this is using PFA film rather than ACF, you don't loose detail, so WOW! WOW! WOW! WOW!

@nobirdsnomasters Ай бұрын

"fox hammer" lol. Jesse, say it like "foe".

@FauxHammer Ай бұрын

@@nobirdsnomasters he knows, he's doing it on purpose!

@theromeog Ай бұрын

@@FauxHammer We pronounce it as Dolphin not Porpoise - LUL

@ResinForge Ай бұрын

😂😂

@GeekDetour Ай бұрын

FoeHammer for the win 😂

@lenahackworth566 Ай бұрын

Really liked having the tilting vat in the Prusa SL1, glad to see it's in more affordable printers now

@Drakonaut Ай бұрын

Definitely excited for the print settings from this one, as I do a TON of batch printing, and the faster that can happen the better.

@UncleJessy Ай бұрын

A bunch of profiles going up today! Saturn 4 Ultra, Update to my Saturn 3 Ultra, a bunch of FDM Printer profile updates

@SADeviant 25 күн бұрын

@@UncleJessy Did this ever go up? I grabbed your patreon just for these and they don't appear to be updated.

@photoboyjet Ай бұрын

I got started resin printing with the original Saturn. Now I have a pair of Saturn 2 printers that have performed almost flawlessly. Looking forward to getting the Saturn 4 Ultra.

@david_dor 6 күн бұрын

I am new to 3D Resin printing. However, I've watched many videos on many different 3D resin printers. This is my top pick if I decide to purchase. Thank you.

@NimVim Ай бұрын

Yo Jessy! I Appreciate this video, man!

@Raytenecks Ай бұрын

I literally *just* sold my resin printer because I hated the mess, but if I hadn't already tried resin printing, this would definitely convince me to try it. *So* much easier than mine was... Except that you still have to deal with all the mess and fumes. I don't imagine they'll ever "fix" that, though.

@lanzer22 13 күн бұрын

Resin printing is definitely a "garage" hobby. I can't imagine doing it in the house.

@poodlescone9700 29 күн бұрын

I am excited to see the resin tray has a pour spout corner. Such a simple yet significant addition.

@welshpiper62 13 күн бұрын

The venom and skull look awesome I'm new to resin printing looking 4 my 1st printer was looking at a GKTWO but think this is a better choise thank you 👍

@aarondavalon8985 Ай бұрын

Yet again you have created a great review.

@coreymartin9630 27 күн бұрын

This looks awesome, maybe I should get into resin printing

@TripodsGarage Ай бұрын

Great video!!I have to say this is one simple to use resin printer! Pretty much just slice and print. Yeah, I might have overlooked where the drip tray was in the packaging 🤔. I might have had someone in this video help me locate it during my unboxing 😂

@Cyrilcynder1 29 күн бұрын

Yes!! You're the ONLY person doing who's gonna be doing a video on the standard Saturn 4. It's kinda a bummer no one else is doing videos on the regular Saturn 4. I'm a bit worried about the tilting vat breaking and the cost that will incur so I opted for the regular Saturn 4 (and the green is so nice) and I just wanna know

@Atmatan_Kabbaher 3 күн бұрын

A quick search shows over 60 videos as old as 11 months. Did you even look?

@clanggedin Күн бұрын

@@Atmatan_Kabbaher Um. The Saturn 4 isn't even out yet bro. How could there be 60 videos on it and 11 months old? Did you even look?

@Atmatan_Kabbaher Күн бұрын

@@clanggedin Did you know that it is a common occurrence for companies to sell advertisers, such as KZfaqrs, early launch versions of their products? It's as if you don't even know how the Internet works, champ...

@ronin942 Ай бұрын

i have pre order this printer, i'm so hype i want it right now to start my journey printing resin

@TheNataliaReyes 21 күн бұрын

How long will it take to arrive? I am considering pre-ordering it, but want to know if it will take long for it to arrive

@ronin942 21 күн бұрын

@@TheNataliaReyes they said I will get it in June / July, but I receive a mail saying me that I'll have it before the 20 of June

@fredm6303 Ай бұрын

Great vid! Thanks

@stefanhaupt4947 27 күн бұрын

best review so far!!!

@bluelotuslandscapes 10 күн бұрын

Hopefully you can still go in and adjust the speed, lift and lower settings in the slicer? Auto calibration is nice and all, but different resins and even different models can require different settings and you need to be able to adjust those on a print-by-print basis. Excited to see the power resume function. That actually seems like something new that Elegoo figured out on their own, instead of just copying the competition. I wonder if it would work better with the heater installed, so the resin isn't cooling while idle? There are questions though. What's with the plate design with the long standoffs allowing resin to pool on top of the plate in an inaccessible space? And a hollow build plate that collects liquid inside and drips it out at random, seems like a recipe for disaster. The portrait orientation touch screen? Why? And it's great that the error calibration detects cured resin floating in the vat but if it still ends up puncturing the FEP, it sounds like they need to calibrate that feature better.

@justsomeguy471 29 күн бұрын

that was a pretty cool intro where it cycles through the different iterations

@Staryanuke Ай бұрын

Jessy, is tilting mechanism more reliable printing wise, overall, compared to traditional up and down printer ? could you get away with using less supports ?

@g0mikese Ай бұрын

I'm really curious how well the mini-heater add on works. Does it talk to the printer, so that the printer will turn it on/off and only start when at temp? How easy is installation? does it sit in the chamber with the vat like their carbon filter things? Or is it in the bottom under the screen?

@WintersailMiniatures 17 күн бұрын

As a seller of models I was a bit iffy on the lower build height limit as I have a few models which are exceptionally tall. But hearing all of this this sounds like a brilliant addition to my fleet. Now if only I had more space.

@daydreamerdesigns3D Ай бұрын

Crazy how quickly new machines are coming out. I bought the Saturn 2 around this time last year and that was the latest machine out - now it's deemed 'old'!

@UncleJessy Ай бұрын

At this point every spring elegoo is releasing some form of an update to the Saturns

@markwhickman351 Ай бұрын

What about screen protection? Included? Will it fit under the tilt?

@jkutz88 Күн бұрын

Two part question, Have you had a chance to test out a wham bam setup on this yet? And when first setting up im guessing dial the printer exposure as is, then readjust after adding the plate?

@deaallen9 Ай бұрын

Will the build plate fit into anycubic's Wash & Cure 3 Plus? A compatible wash & cure is essential for me!

@transmutedelf7453 Ай бұрын

Questions: Air Filtration of any kind? What is the Drip tray made out of? Thinking of how easy/hard that will be to clean over time. With the tilt feature seems like an issue could crop up for the FEP to fail and have resin leak into the printer, how easy is it to get into the printer itself to fix this?

@GeekDetour Ай бұрын

Hi there Clayton! OMG, I wish the Ultra had the green lid - it looks stunning! So much cooler! And…. bib bib bib! Yeah! I love the Bib 🤣 Please, forgive us who started bibbbing in your Live Stream - which always feel like a fun party to be in 🤷‍♂️ You’re the man!

@GreenbrookMedia Ай бұрын

what would i need to make the saturn 4 safe to use in my home in terms of ventilation?

@andresaguilar723 29 күн бұрын

If the settings for speed are no longer important, then how do you set up this printer in your slicer? Like lychee for instance? Does the printer ignores those settings and asks you to select fast mode or slow mode locally before every print?

@Arc-Props3D Ай бұрын

Hey do this printer work exactly like the. Saturn 4 not the ultra the one with the green cover

@erikcederb Ай бұрын

So mSLA have finally catched up with the tilting VAT that Formlabs introduced on the Form 1 back in 2014! Nice to see some progress! 😄

@stringztoo Ай бұрын

Hey UJ, is there a video for the S3U vroom settings? I just upgraded from an S to a 4 Ultra and I'm intrigued about the vrooom settings, thanks!

@gamingwithjacobi8757 17 күн бұрын

Hey, I own a saturn and I am thinking about maybe upgrading to this, i just want to know if elegoo has a way I can allow them to resell my old printer so I don’t have to try to find a buyer to take the old one away or how can I get it to work?

@xXPhanillaXx Ай бұрын

Great video, bought one right after watching this video.Great pricing $399 for printer itself but I went for combo with the Mercury XS wash and cure stations for $579. Would have went for the combo with the air purifier but there was not a lot of information on the air purifier and as this is my first resin printer I need the wash and cure. Would love to see a video on the Air purifier and heater from you.

@TheNataliaReyes 21 күн бұрын

Did they give you a delivery date? I want to order one but am concerned with arrival time, need it before July

@xXPhanillaXx 21 күн бұрын

@@TheNataliaReyes Same told me June/July. They said they are coming by boat to the states and then will be sent by air to be delivered

@JJModelMaking Ай бұрын

Really interesting!! I'm still using my trusty original Saturn, would be interested in seeing a comparison between the 1 and 4, is it time to upgrade?

@PulsefiredGaming Ай бұрын

Jessy. The video was awesome. I've got 4 Saturn 2s and I might need to replace them with these. Do you have a contact at chitu that you could put an ear worm in? The lack of windows snap in chitubox makes me want to use lychee slicer over it

@ClockMonsterLA Ай бұрын

Are there any slicers that allow me to insert a PAUSE PRINT command on any layer I want so that I can switch resin colors mid-print? I hate having to sit there and wait for the correct layer to finish and then pause the print manually.

@zZ-Wipeout-Zz Ай бұрын

the space i have is very limited, but i really want a resin printer for my 3D models i make, but im wondering how bad are the fumes from a resin printer, like can i have it sitting in my bedroom and it will stink out the place with fumes or can i use it the same as a FDM printer with a little more clean up effort ?

@cfeduke 29 күн бұрын

Vat tilt during print (and the bib) is a feature of the Prusa SL1S, surprised to see it here, wonder who owns the patent and if it was leased or if Prusa had kept it available for the industry.

@user-rl4ix5xz9t 17 күн бұрын

Okay uncle Jesse, so I've been debating between getting that one but in the cleaning kit what's the cleaner for the print after your done?

@Rob741741 Ай бұрын

So how do you clean the resin off the top of the build plate?

@aberodriguez4149 Ай бұрын

Hmmm a self leveling resin printer ??? Sounds awesome and the price looks just about my budget. My only question is does those mini heaters provide the required heat output to keep the resin at desired temps and since there are more moving parts is the build plate actually leveled every time ? Thanks for the review and your time.

@Mock10 Ай бұрын

Does it need a air purifier? I have a big Dyson hot cold one with carbon and hepa but do I need more

@user-cq9tm6xp7z 11 күн бұрын

Hi, tell me, I'm typing on Mars4 Ultra, Elegoo Rapid Standard Resin. what settings did you use, I ran into a problem, thin gaps and crevices float on the printed models and tests, somehow the resin does not have time to leak out and bake, I did not notice this in your video. I have already played with the settings and illumination, I set the parameter from 1.5 to 6, but the result is the same, I would appreciate it if you would answer which parameters you use. Thanks

@cotyplays2122 Ай бұрын

Looking to buy a resin printer and have been waiting for the S4U to release and see some reviews and I gotta say I might finally take the plunge!

@spencerkapp8034 23 күн бұрын

Love your videos, but Jessy, what resin are you using that you feel comfortable no mask? 😮

@3DPrintedProps 28 күн бұрын

Nice printer morph effect man!

@codycummings92 Ай бұрын

Just got on your patreon to look at the Vroom settings you have for the Saturn 3 Ultra. Kinda suprised that you didn't have TSMC enabled. Is that something you looked at and just found that it wasn't faster?

@vizionct1 Ай бұрын

Sure glad I ordered mine day one release. I’ll be upgrading from my Saturn gen 1 😅 looking forward to more ultra videos!

@netnoob77 13 күн бұрын

If the FEP punctures, will the tilting vat cause resin to drip into the insides of the printer?

@ternocimadh5863 Ай бұрын

wait u mean the same stl files are also printible with a resin printer instead of an fdm printer right ?

@Albert_zz 26 күн бұрын

I have the phenom l and I would like to know if it can be muted, it is super noisy.

@jasonburnside3626 Ай бұрын

I think the tilting Vat is gonna solve so much with print release issues and I wouldn’t be surprised if it extends FEP life between replacements as well

@gingerdog8203 22 күн бұрын

Did you ever finish the magneto lifesize statue?

@strfabrication Ай бұрын

If the fep breaks mid print - what would happen with the resin and the tilting vat?

@pingbot261 Ай бұрын

this would literally be the perfect starter printer for anyone. Auto levelling and auto resin calibration is crazy. The AI camera is such a good addition too. Ill just have to save for a few years 🥲

@JoeyBonzo Ай бұрын

Every new feature about this printer is an improvement on something that users had complained about with the Saturn 3 line. I'm so glad that Elegoo is not only listening to the feedback that they recieve, but also copying from competitors who are doing the things that printers love.

@weaponcx Ай бұрын

Hi Jesse thanks for the review, can you share with us the VROOM settings for the Saturn 3 Ultra please? Thanks ❤

@rodrigotm1461 Ай бұрын

Uncle Jessy have you tried the Uniformation resin printers by any chance?

@wizkidme Ай бұрын

solid looking printer. still a little concerned about leakage around the tilting bed though. Would love to see how that end of things foes long term Heck, even just how it survives a fep puncture

@hoosegowindustries9047 Ай бұрын

How’s the auto leveling? I recently bought the anycubic m5s and the auto leveling went out after only a month 😢

@carlosserious 29 күн бұрын

I currently own a Phrozen Sonic Mighty 8k. Is the Ultra worth the upgrade in print speed/quality?

@cablevamp3163 12 күн бұрын

Considering looking into the hobby

@RocketMagnetUK Ай бұрын

Do you have control over updates ?

@getjinxed7354 2 күн бұрын

what do you think about this compared to the m7 recently announced?

@DevilsBrushGaming Ай бұрын

Ordered our ultra via your link can't wait to print it. The camera does it work in a dark room amd still film in a time-lapse or do you need to get a light in the printer some how.

@TheNataliaReyes 21 күн бұрын

Did it tell you when you will receive it? I want to place my order but not sure when it will arrive, need it before July.

@BryanBalak Ай бұрын

Ordered mine, can't wait for it to arrive. Should be a nice upgrade from my OG Saturn. What size is the vent circle in the back of the printer? I want to set up an exhaust system for it.

@jasonburnside3626 Ай бұрын

And that vent port is not built into the lid so no issues at all with detaching the hose. So nice!

@fluxcapacitor Ай бұрын

I am in the exact same case and excitation state! I'm currently designing a custom exhaust system too. I managed to run a ⌀40mm PVC pipe vertically down the inside of the drywall of my workshop, as the air extraction unit happens to be located in the attic just vertically from this non-load-bearing wall. The pipe inlet emerges into the room next to where the printer will be, via a 90° elbow passing through a dummy socket cover. It connects through a custom iris shutter mechanism that I'm currently designing, that will allow me to control the amount of air being sucked in, or totally stop the extraction. I decided to use a cheap Chinese replica of a Dyson vacuum hose to connect the printer to this wall "air socket" due to the convenient quick release mechanism. I might add a small activated carbon filter (easy to replace) in order to keep the pipe and the extractor fan in the attic as clean as possible over time (I dunno it this is overkill or not? wrt resin VOCs). If I like the final setup, I'll share it on Printables :)

@ippaku Ай бұрын

Commenting to support the video and the channel thank you for the update. I am still conflicted and thinking about waiting for something a little bit bigger be well be you

@darkusvintivol9960 14 күн бұрын

I was super curious about this printer, i would love to have it but the overall size of it makes it difficult to have in my room space. As soon as i have space i Will consider it. Just what about the smells leaking of the shield? I'm in an apartment with other 3 people, and i would like to not have them on my throat as soon as i start printing ahahah i know it's much of a deal on the side of the resin you use, but as far as i know ther are no "smell free" option, and having it into my bedroom makes it even more of a problem.

@MasterQuatre Ай бұрын

Would the tilting vat also help reduce issues with suction cups? It seems like it would.

@UncleJessy Ай бұрын

I believe it would since it’s peeling away vs lifting straight up

@warwolf54 28 күн бұрын

Saturn 4 or Saturn ultra. I have poor WIFI so that's nothing something I care about and I don't care about time laps. I currently use a thermal ban on my Saturn 2 with the till is there enough room for it to till and come up with it on? Does the Saturn 4 also have auto level?

@briancarter8922 26 күн бұрын

Jessy didn't Prusa resin printer have the dipping resin tray a few years ago? So really this is not a new feature per say. I guess the patent ran out.

@sstarshower 22 күн бұрын

Is it able to hook up to the mars mate??

@wingtipsworld5909 Ай бұрын

ive only ever done fdm printing, not resin. What does the optional heater block thing do for resin printing?

@dandurocher993 Ай бұрын

Resin needs to be a certain temperature so it flows freely in the vat. If you're printing in a cooler space like a garage or basement, the heater will keep the chamber temps consistent.

@zxys001 Ай бұрын

Green cover kicks arse! (do not like the charcoal translucent at all) I wonder how much the green cover is.. or of you can order the 4 Ultra with a green cover? Definitely needs a heater!

@Rmilyard Ай бұрын

How does the heater get powered? From what I see no USB ports inside this. So guessing cable but they put hole in to run it out of printer?

@warwolf54 28 күн бұрын

I believe it's battery powered

@thecyberhobbit Ай бұрын

You should make merch that says "Run off and Print!" 😄

@KlunkersKustoms Ай бұрын

i pre ordered it, and ordered a Mars 4 ultra

@Geeko170 Ай бұрын

I want to see that heater review before I decide if I want to get back into resin printing with this. My Saturn 2 broke me and I haven't looked at it in almost a year. But before I decide anything, I want to see if that heater works.

@StillBurningStudios Ай бұрын

“I’m a man who likes to work on my prints, I like to take them apart and put them back together. Why Elegoo? They have a printer that works, then there’s this flip top box. I like things that are well designed, this box is interesting and practical. New Saturn, quality, speed, flip top box, popular printer price.” All jokes aside I really like that design. I’ve scratched the hell out of my Mono X’s lid on the Z axis taking it off frequently. If I was in the market for a new printer I’d probably be a buyer, but I think I’ll hold off for the 5 and see if they incorporate a heater into that design since that’s my only true issue with resin printing here is I do it all in a cool basement.

@loganmacneil3424 Ай бұрын

Do you think you'll review the new Anycubic M7 Pro when it launches?

@DaveDeVault Ай бұрын

How many layers is the Hellboy bust?

@Londubh Ай бұрын

The only question I have for you is what the different heights are for the various models. You give us time, but I want to know the realistic mm/h numbers

@roguewolf0148 14 күн бұрын

Is this considered a standard or mid size printer? For figurines? Not just busts??

@rodrigoalvarez1712 4 күн бұрын

WOW! These have come so far. Can you use magnetic build plates with this new design? Or, is this no longer 'necessary/super conveneint' for some other reason.

@brandonrubino4538 Ай бұрын

Could you add a flex plate? Is that even a thing anymore?

@tinkeranime 16 күн бұрын

Please do the saturn 4 review soon 😭 Deciding which one to get and I like the color of the saturn 4 better

@GameUpOG 4 күн бұрын

I was looking into a new resin printer. This might just be the one. I'm still using the original mars and hope the new build room will allow more creativity

@abstractfate6104 29 күн бұрын

As of 2024 what is the best resin printer with speed quality and size all in one?

@richardrussell7082 Ай бұрын

I don't think the 'Emergency' stop function should be any deeper than the live front screen when printing. I also fear the tilting vat may, mechanically speaking, end up being more hassle than bonus. Did the autosense 'prevent' an accident by piercing the fep with a piece of debris, thus causing the same accident ? 🤔

@deadlyapollo Ай бұрын

It's more for NOT cracking screens by pushing the debris down into it. Sheets are.....somewhat cheap, screens are not.

@Zimpo79 Ай бұрын

How does this compare the new Anycubic M7 pro? Both just released, both right around same price.

@petercallison5765 10 күн бұрын

M7 has heater and auto refill.

@ogremark5 9 күн бұрын

I dunno about the tilting bed. Fewer moving parts means fewer thinks to go wrong. The early expensive sla printers had tilt bed designs and those seem to have been abandoned by even printer since.

@Theguys1212 Ай бұрын

I know this question is not about the Saturn but I have been thinking about getting the Neptune 4 Plus or Max but I have been hearing people talk a lot about several problems they have (dragging on prints, blowouts on the nozzle, after power loss it deletes all settings so you basically have to restart the print, and after you run out of filament and swap it that has issues) and I am wondering if that is true or if a recent update has fixed that even though this KZfaqr posted this video last week

@BryanBalak Ай бұрын

I have a 4 Plus. Works great. Keep in mind you're not going to hear from the people who aren't having issues on help forums, only the people who aren't setting their z-offset correctly, not leveling, calibrating their filament profiles, etc. It's a great printer. Level the bed with Bed Leveler 5000, set the z-offset and do a layer test. Orca Slicer has a great testing process for setting flow and pressure built into the calibration. Clean your bed with Dawn soap and you should be fine.