A look at how to create a favorite list using the internal Radio Reference database without using the Sentinel software.
Пікірлер: 172
@JDRETTI10 жыл бұрын
October 10,2014 Hello K4DPS, I just bought the BCD-436HP two days ago. I am pretty good at reasoning things out and got the bulk are for my zip working fine. But I wanted the Fav List. The manual was a bit overwhelming for the lay person, I had done my homework and that found this to be the Norm if you will from most manufactures. But you video took me through "exactly" where I wanted to be. I also would complement you on your voice and the reasonable speed in which you spoke. I did pause from time to time as I went through my menu's but overall this was outstanding and just a ton of help! John
@ryans48715 жыл бұрын
I was really hoping this would show me how to create my own favorite list and add channels to a favorite list. Not sure why people feel the need to overcomplicate everything and start a video by saying 'so here's my list I've already created, so there you go!' Wtf.
@ericsoderstrom23865 жыл бұрын
Thank you! I recently upgraded from an older model with no SD card to this scanner and your tutorials are super helpful.
@haskellnj3 жыл бұрын
Simple aspect of the radio but well explained. I had no idea you could do it that easily! Good job! I wish everyone would limit a video to one point like this.
@stavrophotography8 жыл бұрын
Thanks so much for all your amazing videos . I should state when first got this radio.I was still pretty sick, facing ear surgery, fun times. I'm doing a lot better! And thanks to reviewing all your videos. I'm over due, but well on my way to getting things going! Locally, I need to work on military aviation systems.
@wvsky4 жыл бұрын
Great video! I have to refer back to it about every year when things go south on my scanner.
@aphototaker10 жыл бұрын
First of all your video on FL is the best I have seen. I have owned the scanner for 30 days, read the manual, looked online, bought an expanded manual and still couldn't figure out the fav list. Using your directions I have a couple fav lists but still have a challenge. I have range at "0", location is my zip, created a fav list with QK 1, edited the systems in it and deleted all the unwanted. No when I go to scan lists, I set all lists to yes, FL on, and National DB off. Then it says "nothing to scan" So I turn National DB on and it scans my fav list but adds other things to my area (also Law enforce) which I do NOT want to hear. The scanner does not seem to allow me hit avoid on these. I only want to scan the FL which I set up and not other things. In the old days it would be channel bank on and just the stations you wanted. Keep walking on water and solve this one and you will be parting the seas.
@k4dps10 жыл бұрын
Thanks Jeffery for the kind words. Let's check the settings. Go into the menu>set scan selection. Go to manage quick key status>favorites quick key and make sure your favorites are ON. Next, back out of that screen and find "select lists to monitor" and make sure your favorites are turned ON and the Full Database is off. See if that will let you scan only your favorites without the database.
@aphototaker10 жыл бұрын
You have now parted the seas. Followed your steps in last comment and now it works.
@ralphrayburn3397 жыл бұрын
Thank you for the informative video. We fly a news chopper in S. Fla and are upgrading our older scanners to be Apco 25 Phase 2 compliant and we are adding the Pro-voice option. Keep up the good work!
@jlmust9 жыл бұрын
Thanks, just what was looking for. This is a new scanner to me, lots to learn, eliminating unwanted channels and setting the ones you want is perfect. Nice relaxed learning
@boynhood5 жыл бұрын
YOUR THE BEST 3 days trying to do this!!
@mmrubino24 жыл бұрын
Thank you for sharing this. Great to see these videos for a hands on approach.
@markjankowski1133 жыл бұрын
Is the Enter button the same as the E=yes button? I tried this video and got everything set up but when I enter the number for the favorite it goes to the Quick Navigation Key there are three options. F1, S and D. I hit "e=yes" again and it just turns off or on the quick key and does not take me to the favorites I have set up. Thank you.
@jomyk6347 жыл бұрын
That was awesome. I've been trying to figure that our for a week. thanks!!
@george251994 жыл бұрын
I would have thrown this scanner in garbage ! If I did not find this mans channel
@Fireship18 жыл бұрын
Great video. Been trying to understand this beast ever since I purchased it a few months ago. You made this part seem easy. The manual did not! Lol. New subscriber now. Need to learn all I can about this fascinating radio!
@douggriffin29104 жыл бұрын
excellent video, great step by step instructions.....Thanx alot !!
@k4dps3 жыл бұрын
Glad it was helpful!
@southside73218 жыл бұрын
K4AEA Here thank you very much for doing the video. I just purchased this scanner and it was very helpful in getting me setup quickly.
@sandmans62363 жыл бұрын
HI. Great video. One question I have is why you set the range at zero before you put in the zip code?? And what would the effect be of putting in say 10 or 20. I want to make a fav list with air channels of air traffic say 30 miles from my current location (zip code). would I put in 30?? And again, why did you put zero in....does that just give you stations in the particular zip code and nowhere else??? Seemed like it gave you a lot more stations. thanks.
@dominic19672 жыл бұрын
I would like to know this, as well.
@IchibanOyabun9 жыл бұрын
Thanks for the response. Think I got it! Turned off the whole database. And just those I want are played!
@k4dps10 жыл бұрын
Here you go gentlemen. At your requests, I made a video on how to set your priority channels. Uniden BCD436HP setting priority channels
@6548ww4 жыл бұрын
Can you tell me how to take this scanner off Military Time? there should be an option for 12hr or 24hr time but I don't see it can you help? thx
@petrucioci07 Жыл бұрын
Everyone talking about creating favorite list. Nobody says how you switch from a screen to favorite and run a certain channel from favorite list.
@Nihilissa2 жыл бұрын
Thank you so much for this!!
@jimmiddleton5093 Жыл бұрын
Awesome video! Thank you
@69THGILF Жыл бұрын
Great video. Thank you
@xmenken14 жыл бұрын
You are in USA and can download database directly into your scanner. But in Europe and the rest of the world, one has to type everything in with hands because the scanner supports USA and Canada solely.
@zeetrain96256 жыл бұрын
Always the best, thanks K4DPS..
@ChuckRowe4 жыл бұрын
Is there a way I can just copy a single desired system from the full database to a favorites list, without copying a bunch of other systems?
@leahcimd8 ай бұрын
Did you ever figure it out?
@caryjodice21918 жыл бұрын
New to bcd436hp programming for Ohio Clermont county Ohio Marc system....added as a favorite ...in the middle screen it shows the other counties and stops on other the. Clermont county....how can I get it to listen to only Clermont county...
@Larrymar073 жыл бұрын
Thank you 73 - K5EAR Houston
@andone62389 жыл бұрын
Hi k4dps,I just want wanted to let u know I got my radio figured out,my computer crashed on me and whatever icon I clicked on When I was messin with my radio it deleted some info on the SD card right away and I guess my computer drive was really hot and the drive crashed.I do appreciate u taking time out of ur day to respond to my question the other day.Thank you.
@joaquintall51804 жыл бұрын
Douglas...how many times have you been told that your voice sounds just like Matthew McConaughey?! Of all the programming videos on KZfaq for scanners, I have always found yours to be the best, concise, clear and visual. Thank you! Please think about doing a video for the Uniden SDS 200 please? There are so many menu options, probably too many for one video, but I have not added Quick keys to anything on my scanner. I have just ten favorites, but there are many departments under that favorite that I would like to program with a QK. Again, great work and vry 73 de Joaquin
@k4dps3 жыл бұрын
Thank you for the nice comments Joaquin! Take a look at my 536 videos on programming quick keys, the SDS200 works the same way.
@mylisa0710 жыл бұрын
Dear sir. Thank you again for the response. I was actually referring to the hand held version. I would like to know how you add groups to a specificsystem. For example, my system 1 is jJohnsoncounty public safety and iIwould like to create groups, or ddepartmens for the different cities. Group 1 would be for fire channels, and the other groups would be for the different city police frequencies. Does this scanner allow you to do this or would iIbe better off catagorizing different city police deptand fire channels in favorites lists instead?. Once aagain thank you for all your time and responses. Cheers. Jason
@user-tl4ef6pq9o Жыл бұрын
Pulling my hair out. OK I can't avoid some in my favorites list I only want about 4 to scan all the time between themselves. I tried avoiding the others but couldn't find how. I tried as you showed to go through systems and delete those systems. They deleted form that area, but when I went back to scan they appeared and are scanning again. Not sure what I missed. Currentyl, have it set only on my main system to scan. what did I do wrong or missed?
@user-uu4xq8um3h3 ай бұрын
Can you just do a general scan it will scan through everything and then just stopped on an active Channel when there is activity on that channel and then start start scanning through everything again or do you have to scan a specific department at a time
@JustLearning6 жыл бұрын
Can you please explain why you kept the "beep" sound on? Does it help you somehow? I find it annoying! Adds nothing to the demonstration. Please explain!
@Hamlocks3 жыл бұрын
I see that I live in your area, do you still recommend this scanner for our area? I’m not sure but isn’t escambia sheriff and Pensacola police using encrypted systems now? Is there still a lot to listen to?
@k4dps3 жыл бұрын
Hi Tracy. Yes, Escambia and Pensacola used encryption, but we can still monitor Fire and EMS. Same with Santa Rosa. Okaloosa Sheriff, Fire, and EMS can still be monitored.
@Hamlocks3 жыл бұрын
@@k4dps thanks for responding, would you recommend any of the upgrades to the scanner? I think I will order me one.
@k4dps3 жыл бұрын
@@Hamlocks I would purchase the Pro Voice option so you can monitor Okaloosa County EMS and Fire. Both departments used that system.
@jackmongan14108 жыл бұрын
Thank you so much for all of your info. I have a uniden 396bearcat that was programmed for 2 counties in Illinois however, as a freelance news photographer, I'm only really concerned with the Chicago police and fire emergency channels not all of the others. How do I create favorites for these channels? I've seen your other video but the set up is different on the 396. thank you so much. jm
@fredblock696 жыл бұрын
Thanks! This was incredibly helpful!
@n3lud9 жыл бұрын
Doug, this was a huge help. Thanks... John, N3LUD
@chaseelearning4 жыл бұрын
Great explanation.
@goldeneagle81318 жыл бұрын
I have lots of questions on my new scanner
@JohnSmith-uy7sv7 жыл бұрын
mine doesn't do the favorite list like your. When I bring it up it only shows, "favorites 0". no time or date or anything else. I can't find anything in my area in trunking for 800 even though they are all on it. Makes no sense
@AmericanJustice220227 жыл бұрын
Hey thanks for your videos I find them very helpful and easy to understand, Im just getting started with this new technology so any help is very much appreciated, there is one thing that I curious about, how did you get the blue background screen light
@ScottAReid7 жыл бұрын
have you sent your scanner to uniden to have the dimming display issue fixed? your screen is really blue, meaning it is the older (non-fixed) version of the display. the newer fixed displays are more greyish. i like the blue better to be honest, but grey is the fixed display.
@paulstringer7083 Жыл бұрын
Is there a way to only scan your favs without scanning thru the spectrum?
@ronniesisneros26429 жыл бұрын
hello k4dps again thnks for another excellent informative video rs
@LURKING3234 жыл бұрын
Why add dB channels to a favorite list? Is this just a way to remove what you want to keep and what you want to remove? Because then you basically have 2 full databases now?
@The_Southern_Yankee7 жыл бұрын
Thank you very much sir!
@beatfarmerfan3 жыл бұрын
What button are you hitting for “enter”? The screen only shows down to the 456 number line.
@coreybabcock2023Ай бұрын
How did you get the screen brighter like that ?
@MrDinkyDau8 жыл бұрын
Always learning and want to ask what antenna or antennas you use. Inside and outside? Thanks
@glennmorin7431 Жыл бұрын
"Good old USA, thank God"???? Do you have an issue with CANADA??? Just wondering.
@DRose-fo8pj4 жыл бұрын
What is it that you say and press after entering the Quick Key to scan? It sounds like "ZIPCODE".
@davidzaya70738 жыл бұрын
Will not create a new favorite list. I go through the procedure on the video, and when I go to review, edit, nothing shows up?? did anybody else have this problem. also does anybody know how to do a factory reset, like it came out of the box. Thanks Dave
@Vgp-rp4iu2 жыл бұрын
I'm going to be setting up my father in laws scanner this weekend and he wants me set up a favorite list with a few channels he only wants to hear. What would be easier doing it manually or doing it like this then just remove the ones he doesn't want? From the looks of it this seems more simple plus it already names the channel. From what I've seen you have to manually edit the channel name when you do it the other way.
@k4dps2 жыл бұрын
Create a favorite using the database and remove the channels you do not want. Or you may simply lock out the channels you do not want to monitor
@BSDefense779 жыл бұрын
I have a BCD436HP and so far I love it. My only problem is that I have created 6 different favorite lists with the Sentinnel Software. If I don't use the software it won't let me get all of the channels for the each groups that I want. I have Spartanburg Co. Sheriffs Office, Spartanburg Co. EMS, Spartanburg Co. Fire, South Carolina Highway Patrol Troop 3, Town PD, and Sptbg City Police and Fire. I've already written to scanner and the only groups that will scan and broadcast are the county fire channels. I don't understand why the other groups aren't scanning. I have already set all of them to scan and still there is no change. I'm at the end of my rope please someone help! Any advice will be greatly appreciated!
@k4dps9 жыл бұрын
Lee McMillion Menu>Select Service Types. Make sure the correct service types are on.
@andone62389 жыл бұрын
Well I tried the program u gave the link to and and somethin happen with my computer and my radio won't read my SD card I think whatever happen with my computer may have ruined my SD card,if I go buy a new 4gb like what came with my radio can I just put that in and have my radio work without having to do anything like program the SD card to the radio?
@christophernilescoughlin70496 жыл бұрын
Hi hoq much did bxd 436 hp scanner cost and wherw did u buy from thabk you sir.
@hansguckindieluft98763 жыл бұрын
Does I can hear something in germany?? What can I do??
@scottosapatrol39522 жыл бұрын
Where is the enter button?
@wvsky6 жыл бұрын
There is no "enter" on the scanner. Do you mean the "E"?
@soupdragon123452 жыл бұрын
Hi there , I have a quick question ? I would like too recorded just my local fire department , can I do that ? I’ve tried holding on the channel but it still records everything else .
@k4dps2 жыл бұрын
Yes, just hold on that one frequency and it will just record it. But, from the beginning, it does record a few transmissions from your most recent scanning for some reason.
@Bkeytx10 жыл бұрын
This is Brian again N5LNL. My brother lives in Daphne, I may be in that area for a week next month, according to Radio Reference, Baldwin Co Sheriffs department is Encrypted, do you see many depts. going to this?.
@k4dps10 жыл бұрын
Baldwin Co Sheriff is encrypted, but everyone else isn't. All the local police and fire departments in southern Alabama can be monitored. The Escambia County, FL Sheriff's department is also encrypted, but there frequency 460.150 Records Check isn't. Most agencies around here can currently be monitored.
@Bkeytx10 жыл бұрын
K4DPS Alright thanks
@goldeneagle81318 жыл бұрын
my Question when I want to use zip code it goes to freqs instead of scanning location
@djjoep1003 жыл бұрын
Nice
@Ms.PattiLabelle9 жыл бұрын
Question, is this device 800mhz? If not, do you know of any portable 800mhz?
@richardpeterson11348 жыл бұрын
+Guest Account yes
@americanhero035 жыл бұрын
Thanks for the help
@kishascape2 жыл бұрын
Can you program things in to scan manually from the radio? The database is not very good in lot of areas and leaves a lot out for those who like to listen to non public safety stuff.
@k4dps2 жыл бұрын
Yes, you can program what you would like to monitor manually, you do not need the database.
@doublea35424 жыл бұрын
Hi I find your videos very helpful and informative. I'm having a problem getting some systems in my favorites to monitor when i turn off monitor full database.I only want to monitor favorites, but when I turn off full DB, systems are missing in my favorites. Any help would be appreciated!
@k4dps3 жыл бұрын
Sounds like you will need to program those systems into your favorites only list without using the database. It would actually take me too long to try and explain it here. I wish I could be more helpful.
@balbanese53 жыл бұрын
Hi there! Great info. Brand new user here. So, when you do this favorite list, does the scanner still catch the original zip code frequencies as well??? Thank you!
@k4dps3 жыл бұрын
You have the option in the menu settings to turn on or off zip code scanning.
@RegNatarajan6 жыл бұрын
Very helpful!
@ltreziseable9 жыл бұрын
I live in Australia and am wondering if both the BCD996XT and the BCD436HP are available in this country, we have just gone P25 digital here in the State of Victoria with our country CFA fire brigade so we will have to change our scanners to digital as they are phasing out analogue.
@k4dps9 жыл бұрын
Len, I would check with retailers that sell those scanners and ask them if they would ship to your country.
@IndicamGuy10 жыл бұрын
Is there a quick and easy way to bring my frequencies from my BCD-396 into my new 436? The video was very good by the way.
@k4dps10 жыл бұрын
Take a look at these posts from RadioReference: forums.radioreference.com/uniden-thread-archives/279556-freescan-sentinel-talkgroup-list-converter.html forums.radioreference.com/uniden-prospective-owners/290050-how-transfer-396xt-996xt-files-536hp.html
@stavrophotography9 жыл бұрын
I am sure others have wondered about this as have I. There are some federal agencies that do operate in the clear, but often they use encryption. If I'm not mistaken the 436hp ignores the awful buzz saw like noise correct?
@k4dps9 жыл бұрын
On P25 Phase 1 the BCD436HP does skip over it, but does not on P25 Phase 2.
@stavrophotography9 жыл бұрын
O.k great, thanks.
@hendrikusgarcia252610 жыл бұрын
In Brazil police use APCO 25 Phase I and Phase II encryption, this scann listen system encryption?
@k4dps10 жыл бұрын
Hello Hendrikus, No, this scanner will not decode encrypted transmissions. It does receive both APCO 25 Phase 1 and 2 non-encrypted frequencies.
@ronniesisneros26429 жыл бұрын
hello I think the info u provide is great and helpful wat do u think is a good software update for the bcd436hp I have tons of questions
@k4dps9 жыл бұрын
Hello Ronnie, the only software I use for the BCD436HP is Sentinel.
@stavrophotography9 жыл бұрын
Follow up. I have just used the database for my programming at this point. So, if I use the software to program the radio further. When I am working with it. Will it show what scanlist is currently in use? I hope that makes sense?
@k4dps9 жыл бұрын
Yes it will Steve.
@lifeisamatrix59608 жыл бұрын
out of curiosity when using the ctcss aka pl does the 436 do squelch tail elimination like the whistler models?
@k4dps8 жыл бұрын
Yes, it does.
@allenpaul755 жыл бұрын
helps alot , thanks
@stavrophotography10 жыл бұрын
Hi, I've posted to you before on some of your other video clips. I am probably days away from purchasing this radio. I am located in the Seattle area 98110. And would like to monitor several counties within the region. When setting up the radius you want to monitor. Do I select the county that is within range but the farthest away? These are the counties and approximate distance from my location that I want to monitor. 81 miles Snohomish county 79.4 miles from Thurston county 68 miles from Pierce county 54.3 miles from Mason county 8 miles from King county.
@k4dps10 жыл бұрын
Hello Steve. I would set the range at 50 (maximum number) and enter your local zip code. Afterwards, take a look at the counties the scanner loaded. If something is missing, you can always add them. I would create a favorite list and then add all the counties you want to that list. You can do that by entering the counties zip code. Once the system shows, then just add it to your favorite.
@stavrophotography10 жыл бұрын
Thanks a bunch. I'll let you know when I get the radio. And if I have any questions. You've been a big help!
@ge45gecalled39 Жыл бұрын
would that be for the 536hp?
@bwilliams68399 жыл бұрын
Hi there k4dps I found a new p25 frequency for my local state patrol and am wanting to program it to my radio,the part I'm confused about is it is p25:71E is the system and I'm not sure how to go about programming that in.do I do it under a p25 trunked,or p25 one frequency I don't believe it is a p25 X2 tdma the frequency is 171.9875 however the frequency is not listed on RR which is odd in a way to me, I'm still getting to know certain stuff so that's why I'm asking,any help would be great Thank you
@k4dps9 жыл бұрын
B Williams Just program it as a conventional channel and the scanner will decode it. 171.9875 is Federal not a state frequency.
@IchibanOyabun9 жыл бұрын
Have a question for you. I have created a favorites list as per your video. When I go into the favorites list to delete some channels from it when I go to listen to the playlist I still see some of the channels I deleated. What am I doing wrong?
@IchibanOyabun9 жыл бұрын
@IchibanOyabun9 жыл бұрын
Also when I go back to look at the favorites list. They are not there but still show up when scanning the favorites list.
@k4dps9 жыл бұрын
Scott, I have never deleted some channels without using the software so I don't know how the scanner handles that.
@stavrophotography10 жыл бұрын
About the software. I'm a Mac guy. Do you know if the programming software is compatible?
@k4dps10 жыл бұрын
I'm also a Mac guy, but you will need a PC to run the software. I haven't had much luck running parallels with it.
@stavrophotography10 жыл бұрын
K4DPS Thanks a bunch. I've been placed on an e mail list from scanner master.com They're out of stock right now. So I'll get an e mail when the radio is back in stock. I'll keep you posted.
@theoldiesdon10 жыл бұрын
K4DPS I am a Mac Guy as well..what I wound up doing is instead of running Parallels, I have a designated partition on my laptop running windows (easy to boot into at start up holding the option key) and all the software runs smooth as silk.
@Philios2Glory110 жыл бұрын
Hello, Could you tell me if this will work on analog to? And which do you prefer the unit above that you have? or the BCD396XT?
@k4dps10 жыл бұрын
Hello Austin. Yes, the Uniden BCD436HP scanner receives analog transmissions. The video is the scanner listening to conventional analog transmissions. I like both the BCD396XT and the BCD436HP. I like the size of the BCD396XT and I like the display screen and record feature of the BCD436HP. I don't really prefer one over the other.
@Philios2Glory110 жыл бұрын
One other thing, Are there any technology difference between one over there other? Does one have a more of a advantage over the other? I noticed the BCD436HP has a Phase2. Thanks a bunch.
@k4dps10 жыл бұрын
***** Yes, the BCD436HP has the P25 phase 2 receive capability, along with a built-in nationwide database and record features. If I was going to purchase another hand held scanner, I would buy the BCD436HP. It is a good scanner with many features I enjoy using.
@benfulford52558 жыл бұрын
shame it won't work and save database lists like that here in the uk ! I need to live in America lol,
@andone62389 жыл бұрын
Hi again k4dps,well I recieved my 436hp yesterday and I made a couple mistakes when I was trying to get it programmed and I would like to reset my radio but how do I clear the SD card of the current storage I put in it?I haven't been able to find how I can reformat the SD card.I do appreciate ur time from all the questions I have previously asked.
@k4dps9 жыл бұрын
And One Here is what I use to reformat my cards: www.sdcard.org/downloads/formatter_4/
@andone62389 жыл бұрын
That must be a good download because I have seen it on a few different threads I just wasn't positive, thank you.
@VictorMunoz-yz2te7 ай бұрын
ES UNA BELLEZA COMO EXPLICAS , PERO CREO Q TENDRIAS MAS PUNTOS SI EXPLICARAS ESTO TAMBIEN EN ESPAÑOL....VI LA PANTALLA CON LA PROGRAMACION , PERO NO VI TUS DEDOS ( Q HACIAS ).UN SALUDO GRANDE ❤ 73S de W6- YS1AFS. or. KB6LGZ ....QUIER OIR MAS DE TI....GRACIAS MIL X ENSEÑARNOS❤
@lucky431136 жыл бұрын
THANKS A LOT
@hoffman9806 жыл бұрын
My function botton does not work like its locked out. Can any one help?
@petbytes71679 жыл бұрын
What was the reason for setting the distance at 0 and leaving it at zero? de K6KNS
@ScottAReid7 жыл бұрын
my ? also, but he wont answer us. maybe someone else out there can answer this???????????????????
@issacmichener77947 жыл бұрын
Can you listen to the hospital on this
@mylisa0710 жыл бұрын
Thank you for the post. I would like to ask how you program an actual system. Do you have to create a favorites list first, or can you manually program id numbers and name them?. I assume you have covered this already, but I am not a fast learner. Do you also know how to delete or lock out the systems/departments that you do not want to listen to. I live in the Kansas city area, and I am receiving departments as far away as wichita. Any help would be appreciated. Cheers.
@k4dps10 жыл бұрын
Hello Jason. Yes, you may create a favorite list and then manually program trunked ID's and names into it. If you would like to delete a certain talk group ID, there is a red X towards the top in the Sentinel software. If you would like to just avoid a certain talk group ID, then right mouse click the talk group ID and click "avoid". The easiest way to program these scanners is by using the software.
@mylisa0710 жыл бұрын
K4DPS Thank you very much for the quick response and information. I am not good with programming by computer, but am learning. Right now I am just trying to get started by manually programming systems. I am confused as to the difference between a system and a site. This is where my comment gets a bit lengthy. With my old BC-346, I would create a system, if that is the correct terminology, and name it, for example Kansas city Mo Fire/EMS. Then i would enter all the frequencies in order since it was EDACS then, and then once I was in search/scan mode, I could make note of the active ID's and name them. I would then create groups. Group 1 would be for fire channels, and group 2 would be for Police. Hope you followed me on that one. So my quick key I guess would be 1 for example to scan the whole system and my groups would have numbers as well. Holding down the function tab and pressing the group I would not want to listen to would be what i would do for that. If this sounds familure to you, please let me know if this scanner can do that. I do realize I have to be in the right system first, either conventional or digital, trunked, etc. Than k you again for all our time and responses. Cheers.
@k4dps10 жыл бұрын
Jason T A system would be the Kansas City Police Department. A site is the frequencies that are used for the system. With the new Unidens they have changed the terminology. You would create a favorite and name it, for example, Kansas City Public Safety. Next you would add the System and sites, for example name the system "Kansas City, Police". And add the Site name of "Jackson". Enter the frequencies of 851.050, 851.325, 851.600, 851.8625 to the Site. Within the System of Kansas City Police you can add talk groups 33050, 33051, etc. and place the scanner in ID Scan mode. The scanner will only scan the talk groups you enter. Or you can set the scanner to do a ID search so it will show all found talk groups in the system. You can add as many systems as you would like and turn each system on and off just like the old Bank Scanners.
@mylisa0710 жыл бұрын
K4DPS Thank you again Sir. This sort of makes sense. Are you saying that you still have to add all frequencies associated with the system you want to listen to before you can start programming ID numbers and then going back and naming them?. Once I have entered my zip code, i automatically pick up what is around my area and even farther out than that, as we both know. My question is, if I make that sysyem a favorites list, can i just manually program the ID numbers and then naming them and assigning them to groups?. I realize I have taken up some time with these questions, and do than k you again for your assistance and expertise.
@k4dps10 жыл бұрын
Jason T Yes, if you make a favorite list with that system, you can manually program the ID numbers, assign them to groups and name them. You will need to use the software to make things easier for you.
@BENCHPRESSMAN10 жыл бұрын
Thanks
@andone62389 жыл бұрын
Hi again k4dps, I keep comin up with questions about this radio.can u have multiple favorite lists scanning at the same time?
@k4dps9 жыл бұрын
Yes, you can scan multiple favorites scanning at the same time. I currently have 35 favorites and they all can be scanned at the same time.
@andone62389 жыл бұрын
Hi there k4dps thank you for your reply,that is good for me to know because I wasn't sure on that, also the state patrol in my area is p25 phase 1 does the bcd436hp receive phase 1 clearier then the grecom? With my Grecom it isn't bad it is mostly clear but I'm superised with the reception being kind of poor for p25 phase 1..other frequencies r fine it is mainly the p25 phase 1..
@k4dps9 жыл бұрын
And One I really can't say if the BCD436HP will receive the state patrol system any better than the GRE. It depends on the P25 system itself. If it is a simulcast system, any scanner could have a difficult time receiving it because of multiple transmitters on the receive frequency. The scanners receiver gets overloaded and you will hear poor reception. The best thing to do is use a different antenna and/or try moving your scanner around the house to find a 'sweet spot' for receiving. Some folks have even used a paperclip to help receive simulcast systems.
@jacobbartley592710 жыл бұрын
I have broken my belt clip how do I get a new one
@k4dps10 жыл бұрын
Jacob, I searched on Uniden's website and they currently do not have it listed. I would contact them and see if you can order one direct. Here is the website contact information: www.uniden.com/page/faqs
@jacobbartley592710 жыл бұрын
Thanks
@atprogold10 жыл бұрын
is this a digtal scanner
@k4dps10 жыл бұрын
Yes Doug, it is a digital scanner that is capable of receiving P25 Phase 1 and 2 transmissions.
@JustLearning4 жыл бұрын
That was too convoluted. I have 50 Favorite lists and do not use Quick Key or any keys. I just go to Favorite lists and toggle them on and off. I do not usually listen to Police or Fire or EMS. My interest are on local Public safety and Malls and Store Security. Just use Sentinal and create favorite list and off you go.
@truemopar10 жыл бұрын
that is awesome thank you man
@goldeneagle81318 жыл бұрын
state wide.p25 put in to favorites from start to finish
@GunsHarleysUSA3 жыл бұрын
I followed this but when I Put in my number for my favorites list it just starts scanning everything I blocked out and not my favorites list..What in the heck is wrong, I have never seen such a piece of crap $450 radio in my life. Can you tell me what is going on?
@k4dps3 жыл бұрын
In the menu settings, go to lists to scan and turn off the full database scan list.