They say he's still working at this stump to this day

I think the gentlemen used all the wood from the original tree as firewood to burn the stump.

This video reminds us of what a technological marvel a stump grinder is.

Welcome to How To Cook A Stump. That mesquite and Vegetable oil, pinch of salt, Perfect~.. It's a little crunchy but once you get passed the char its wonderful! hehe Good video! My stump is thoroughly cooked well done!

The old timers back in the day would just go to one of those little small town hardware stores and get some dynamite. Easily found in mining towns. Just remember to yell "fire in the hole" before blasting that stump into smithereens. Ahhh...the good old days. For some odd reason you just can't get dynamite at your local hardware store anymore.

I'm gonna return in a year from now to see how far along we are with that stump.

There’s a much easier way. Drill a hole in the center as deep as you can. Then drill holes from the side to connect to the center hole. Use a “sparkler” and put it down the center hole. It will burn like a rocket stove from the center out, while pulling air from the bottom. It takes 15 minutes to prep, it’s gone in an hour or two

His grandchildren eagerly anticipate visiting their grandfather, affectionately known as "gramps." They bring along marshmallows and gather around an old burning stump, a cherished tradition they look forward to repeating every year.

I just sprinkle epsom salts in all those drill holes and let nature do it's thing. 2 huge stumps completely gone within a year. For under $10. No digging, no fire, no mess. Poked a hole in the centre, added some soil and a couple of new plants. My trees were over 9 metres tall.😊

It's like a hobby, and a whole lot cheaper than buying a stump grinder. In some parts, one could never get the burn permit for the duration of this video, and for good reason. I just drill the holes and let nature do the rest. Whenever I mow, I bump the 60" mower deck into the rotting stump and remove the rotted exterior a little, whatever falls off is all good. Eventually, I'm running the mower right over the stump and it's done. It can take a few years, but I'm in no hurry.

A modern classic. I laughed, I cried, the man in sandals was unforgettable as "The Stump Burner." Must see feel good event of the year.

I love this video. It was honest and down to earth. Reminded me of stuff I get into where it takes an hour to do nothing. They don't say "STUMPED" for nothing. Thank you. Enjoyed it.

there is a video on youtube where i guy does the burning thing also and then talks about how someone he knows did it and burnt his garage down as the fire traveled in the roots into his garage.

😅 Red Green approves!

A mans gotta have a hobby. This keeps him at home and outdoors. Realitively safe since by three in the afternoon hes stumble drunk and drooling.

Stump grinder. 1/2 day rental, Ace Hardware $45. And you'll have some nice mulch instead of the ash and charcoal mess.

I did basically the same without fire. Drilling the holes, but then putting all the wood chips back into the holes. This collected rain and moisture, resulting in the root rotting fast,. Within a year, the stubs were gone.

Idk whats crazier that this guy took over a month to do all this...or the fact that it has 1 mil plus views. Either way ❤

Hell, may as well get out some steaks and burgers, then mount a big camp grill on top, LOL! That’s a pretty neat idea. Slow, but neat.

Are you kidding me? Days of work and countless fires and it's still there? You passed easy way back there.

You know what I mean Vern?!

A KZfaq classic. Never gets old.

Another way to make this work faster is to get an old oil drum (44 or 50 gallon), cut the top and bottom out and place the drum over the top of the stump. Dig out air holes in the ground around the drum an light the stump up. The drum acts as a chimney and draws in the air like a furnace.

I’ve removed many of stumps by digging a hole around and underneath the stump and then burn it from underneath. Dig a hole next to the stump, cutting any larger roots, then use a garden hose to wash the soil from around the stump into the hole you dug. Then keep digging in the same hole until you expose all the roots. Build fire around and underneath. You need air circulation or it won’t burn.

So why couldn't we drill 4 holes vertical connecting them with horizontal holes creating 4 rocket stoves and repeat the process if it goes out

We had a smaller tree back in the '50s that died. We cut it closer to the ground and my dad just dumped his BBQ coals on it when ever he BBQd (often). We moved maybe a year later and you could still smell the roots burning.

Thanks for showing me your project. I suppose vegetable oil was used so that the ground would not be contaminated.

Welcome back to "My Grand Daddy's" stump removal. I'm the third generation of the Smokervilles family to have the privilege of doing my granddaddy's name right and get this dang stump out. Don't forget, we gonna do it the slow way....😂😂😂. Props to this guy never giving up!👍

If u made a hole angled to below the stump to add a leaf blower to induce air

I'm glad I'm crazy too.....and u right...its cheap...easy...and I love to sit around and watch it disappear...the stump that is...😅

You have to hold the heat in. Beat I have found is use some metal flashing to surround your stump, and a Weber Kettle lid on top.

Easy way and no cost is to use waist motor oil!! It burns longer and hotter. It will cover the entire area soaking into the wood and burns down into the ground when done correctly drill the holes deep with long wood spiral but..

Octants, not quadrants.

If you had drilled a hole in the stump at the base of the and through to the bottom and pour your favorite(EPA approved) burning solution, then light it. Takes just a few hours.

Grant's stump remover (Potassium nitrate) works too.

Interesting video. When you said it's not the fastest way, you weren't kidding!😄 Personally, I would hire someone with a stump grinder and be done in a matter of minutes, as opposed to weeks. But hey, that's just me...😉😁

This should be under the 'fails' videos. I called a guy with a stump grinder. It cost $75 and he was done in 20 minutes.

I definitely prefer the potassium nitrate method, everybody always shits on it but that's because they don't do it right. The best way to do it is drill 20-30 evenly spaced 1/2" to 3/4" inch diameter x 8-12 inch deep holes into the face of the fully dried stump (which should be covered with a half sheet of plywood, leaving a gap with some spacers between the plywood and stump to allow air flow, for at least a year). Fill the holes to the brim with potassium nitrate/KNO3 prills, then pour boiling hot water into the holes to fully dissolve the KNO3 along with helping to dilate the wood pores to allow for slightly better absorbtion. Once it appears there is no liquid at the bottom of the holes after drying for a couple weeks, repeat the KNO3/hot water cycle again, and a week after the second pour, add in some more boiling hot water. This will make the KNO3 absorb into the wood itself. After fully drying (this is a process best started at the beginning of spring and burned at the end of summer/early fall) after a few more months, it's ready to burn. At which point you pour one final round of KNO3 into the dry holes without adding any water, instead pour in some kerosene or deisel then build a fire on top of and around the stump as shown here. At this point you've filled the majority of the stump with several pounds of potassium nitrate, which contains a huge quantity of oxygen, and will make the stump burn ten times faster than doing something like this. If you put enough KNO3 in and it absorbs in properly, it will slowly sizzle away before your very eyes, it's amazing actually. If you want to see how much power KNO3 has, take a stainless steel shot glass or serving cup (gripped in some pliers) and fill it half full of KNO3, then hold a propane torch under it until the KNO3 is liquid and red hot, then carefully pour the liquid on a piece of wood. It will eat the wood away in seconds and burn violently, digging a deep hole in the wood.

I admire two things, here - Your great voice for narration and tenacity in getting things done. Per *his other* videos, folks, see some other methods before criticizing by default (you know, people these days)---🤨🤩🤨

I have never understood going beyond lighting a fire on top of the stump. May take a bit longer, but it saves so much effort.

Could beaver and change him to the stump

If you use a nitrate fertiliser such as ammonium or potassium nitrate , instead of the oil. The stump will burn out without having to continually tend the fire. The nitrates are oxidisers and the burning stump will not rely on oxygen from the air to keep it burning underground.

I have never seen so many people with so many different opinions on the best way to do something.

Liked the video but that's quite a long time to wait. If I wanted to remove it quickly, I'd just chop pieces off the sides, just like I do with three foot pieces of cord wood. That would reduce the volume above ground very quickly, on a stump this size, likely less than 30 minutes. Then just burn what was left. If your stump is still wet then you might have to add some oil to get it started and allow it to burn through. I find the easiest way is to just leave the stump, maybe split some holes in it, and come back in 20 years. What ever is left has been weakened so badly by insects, mold, fungus and overall decay that you can just rip it apart. :-)

This looks fun. Nice little summer project.

A hand held leaf blower work really good

Just hire a stump shaver and be done...good grief. LOL

Match lite does not leave an aftertaste if you let it burn for about half an hour or so as you are supposed to do,let flames die all the way down before cooking. Most people add the meat WAY too soon. When using the product..

Could this cause underground fire?

A stump grinder would be a hell of lot easier. 😂😂

Would a metal barrel help concentrate the heat and fire better.

Time to get a Milwaukee 18v drill, that Dewalt you have there is about 15 years old? I have one also, it’s been retired.

....and you have to use good clean cooking oil. Not playing with a full pack!

If your board and retired staying out of the house from The wife this would be a great way to burn a stump , ive got my own way will burn up over night completly

I watch mostly Historical or Science related docu's but I also watch homesteading stuff sometimes and so "They" will put up these little Gems from time to time, all he's doing is burning a stump but I enjoy these kinds ever so often just for enjoyment reasons, get away from the Apocalyptic Poisoned Media for a while.

I first learned this from my then 76 year old grandfather when I was 10. He loaded the stump with kerosen. lit it and came back a weekk later. The stump was pretty much gone

Or he could have used the Tractor parked in the shed. !! Classic

Ótimo vídeo, parabéns, o óleo não contamina o solo.

Купил бы мясо. На шашлыках🥂🥩🥓 бы посидел.

Should have got some marshmellows n winers n have a cook out..

Every time he said vegetable oil I did giggle think I'd of been out there having a bbq though lol

Should have drilled some slanting, horizontal holes in the sides to allow air in and get a “rocket” effect.

Idk. Looks like 2 gallons of veg oil, big bag of charcoal, and enough firewood to heat my house for days was used for the "easiest" stump removal. Allrighty then. Fun experiment, but not the easiest or cheapest. Thanks for posting!

Что за жидкость?

Me thinks the stump got the last laugh.

China called. They said ease up with the damn cooking oil dude.

They say a nearby forest was cut down to burn out that stump😂

On your next one. Drill a few holes Horizontally if you can.

you can do the same thing without all the wait by just digging a small hole on one side of the stump, put some charcoal in, and start it burning. It can take a day or 2 to burn completely.

Didn’t the title say “easy”?

I'm back and it's day 428 and the damn stump is still here!! WTF....lol :)

I like the Hilly Billy accent.

The roots may smolder for ages then flare up and burn the neighborhood down!

It would burn better had you put vent holes around the sides. Just a thought

Is there a part two?

If you drill the hole on the top and then connect them via 2 or 3 holes from the side, the stump burns inside out.

In my country we light it up, put soil over it and let it burn until it becomes charcoal. But you could also get a stump grinder if you don't want charcoal.

if You got a Friend that can get a fire truck😂 blast the dirt all around the stump about 3-4 feet! just say you need a little pool filled😇

Who is this guy? I thought you were about to have a bbq.

Use a mattocks. Get a little exercise every day. Dig down to see the roots, take a mattock to them. You'll finish sooner than burning.

Renting a stump grinder is simple and easy and waaay cheeper than all that oil and charcoal.

Die Arbeit die Sie investieren mit Wartezeit,die es zum runter brennen des Baumstumpfes brauchst kann man sich auch sparen.Man benötigt 1 Spaten+ 1 Säbelsäge elektrisch und in 2-3 Stunden ist der Baumstumpf aus dem Boden. Habe es selbst schon mehrmals gemacht

You had me at eight quadrants. 😊

Burned diesel oil mixed with diesel fuel

Lol imagine having stockpiled all that wood just for ol boy to use it to kill a stump

Whatever happened to Stump-Out? I haven't seen that stuff in 30 years. Did they stop selling it? Edit: Never mind. I guess it does the same thing.

This is awesome. Simple and anyone can do it.

Maybe you could have put a metal shield around the fire get oven creative ! You kinda burnt ten stumps with all the extra wood seems like a waist of time... Just saying

I would use an auger bit and drill as many holes as possible and then go out and rent a grinder.

If you'd drilled holes horizontally across the base, it would have burned miles faster.

I did this about 4-5 years ago. 4ft williow stump. Used diesel instead of the vegetable oil. Burned for 5 days, 99% complete. Left 3ft deep hole the diameter of the stump plus the stump veins that went out around about 6ft. 10/10 recommend. Only started the charcoal and nothing else.

He did it. He had to cut 2 trees to use as firewood to get rid of that stump. And then he realized, now he had to cut 4 more trees to get rid of the 2 new tree stumps. So he gave up and just planted flowering plants around the 2 new stumps to hide them.

Environment Enshmirement. All oils came from the ground, all oils can go back. The healthiest lawn in my neighborhood is where I dumped my used oil

I'm quickly moving through this video, only to arrive at another part where he adds a bit of vegetable oil... Good video though!!

😂😂😂 finally! A good use for canola oil!

За неделю пень сжёг😂😂😂👍 лопатойи топором за 1 день смог бы.

Always Grind it away. Cheapest ... Fastest ... most complete ... 100% removal. Nothing else comes close.

My advice: It is much easier to hire a man with a professional stump grinder than to burn it down. He grinds it down in no time!

Comments better than video.

If you are going to put wood all around and make a fire, that oil was wasted 😂