Рет қаралды 25,499
Well I finally did it. I installed Union Jack taillights on my MINI. I can say the final result is incredible and I want to thank The MINI Vlog ( / theminivlog ) for providing the instructions in the 3 videos he made on the subject as this process can be tedious. I included the instructions below and I did some checking and you have to do something similar for the aftermarket taillights but the process is very straight forward. I am still having some flickering on start up on the indicators but I think that will be remedied by changing the settings to those as well. You'll need to download the BimmerCode App and purchase expert mode.
Instructions:
1. Plug in ODB connector and connect via Bluetooth to your phone
2. Launch the BimmerCode app
3. Go into the Body Domain Controller category in basic mode
4. In the voltage monitoring section, make sure the Tail Light Monitoring is set to LED and not monitoring
5. Find module called "Adaptive Brake Light Cold Monitoring" - set from Active to NOT ACTIVE
6. Change into expert mode
7. Go to the 3061 LcxOutputChannels2 section
8. Find and set BL_R_IS_LED = aktiv (active)
9. Find and set BL_R_WARMUEBERWACHUNG = nicht_aktiv (not active)
10. Find and set BL_R_KALTUEBERWACHUNG = nicht_aktiv (not active)
11. Find and set BL_L_IS_LED = aktiv (active)
12. Find and set BL_L_WARMUEBERWACHUNG = nicht_aktiv (not active)
13. Find and set BL_L_KALTUEBERWACHUN = nicht_aktiv (not active)
14. - 3064 - Mapping_brakeforced_1_L_Output = bl_l
- 3064 - Mapping_brakeforced_1_R_Output = bl_r
- 3065- Mapping_brakeforced_2_L_Output = bfd_l
- 3065- Mapping_brakeforced_2_R_Output = bfd_r
- 3065 - Mapping_bremsl_2_L_output = fra_h_l
- 3065 - Mapping_bremsl_2_R_output = fra_h_r
15. Now tap the code button in the app.
16. Your ECU may restart and your engine will shut off.
17. Power off the car.
18. Power back on the car and you should not see any errors!
(NOTE: I got a fault on the taillights while applying the brakes today. Make sure everything pertaining to those uniques, indicators and reverse bulbs, are set to LED with the warnings turned off. Better to be on the safe side with that.)
The MINI Vlog: Installation Videos
• Upgrading to the new U...
• Mini Cooper Union Jack...
• MINI Union Jack Tail L...
• MINI Union Jack Tail L...
• MINI Cooper Union Jack...
Remember to like, comment and subscribe and don't forget to click the notification bell.
Help support my Obsession: paypal.me/ZIngalls
For business inquiries or MINI related questions, contact TheMiniac@yahoo.com
Use code MINIAC5 to save 5% off on your next order at OutMotoring.com
MINI Performance, Speed, and Style, it's OutMotoring.com
Use code MINIAC to save 5% off on your next order at MotoringStripes.com and MotoringBadges.com
Channel Sponsor: www.OutMotoring.com
MERCH STORE: shop.spreadshirt.com/MINIACMERCH
Channel Instagram: @The.Miniac
Patreon: (Being Upgraded)
FunFob.com: funfob.com?ref=12
Live Fast, Drive Young.
Disclaimer: The views expressed in my videos are my own and do not reflect those of Baron MINI or MINI USA. If I show a product in the video it was a product I paid for in full and have not received compensation by the company that manufactures that product. However, I may show a product that has been provided to me to try out for a potential sponsorship. Baron MINI nor MINI USA sponsors this channel. Baron MINI merely provides vehicles for my use and for the entertainment of my viewers and subscribers.