What’s awesome, you son has figured out counter steering

That's awesome man, loved how he was already just yankin on that throttle lol

Some mad drifting skills there

parenting done right

You’re the man! Good stuff bro

Great video. 24v, Stage IV motor/gearboxes, and a Brake Reduction Module is our best combination for speed, durability, and ride fun. Excellent job showing people how easy the install is and to break them in. Glad you and your son are having fun with it!

24v is fun but even with the upgrades they get super hot and will still have reliability issues. The best is 18v cause it seems to be the right balance. The first gear isn’t the int that strike either it’s the final drive gear which is still plastic. I’ve tinkered will several of these now and all in all.. the best combination I’ve found for increased performance and reliability is using 2 18v 5ah tool battery’s wired in parallel. This give 18v performance and much longer run time as well as faster charging. Really if you can fit as many drill batteries as you can wired in series’s being sure to run a voltage drop regulator so you don’t over drain the lotion cells and ruin them. Regular RC batteries are even better as they can deliver more output making even an 18v faster then a 24v with less motor heat.. but the drill batteries is really the best way to go. I wouldn’t use HO drill batteries though just regular 4-5ah ones. They tend to overheat the motors as much as running 24v That said.. more important is that you add cooling to the motor box area and keep the gear boxes packed with good grease as they really don’t strip till they get dry and the extra heat in the gears melts the grease out pretty quick. You also want to get the heat sinks that bolt around the motors. Drill few holes in the front and rear of the housing around the motors and add heat sinks and 18v will last as long as factory setups. If you really want to go 24v then keep spare factory 7r gearboxes on hand and add cpu fans with 775 motors and sinks. In all honestly this is fun to do for your kids but in the end it’s easier and cheaper to get an actual 24v platform which comes with a real solid axle and drive motor (very similar to what you would find in a regular atv only electric setup) you can then bump them to 36/48v pretty easy an inky have to deal with swapping the controllers. You can even add small gas motors to them later pretty easy if you want to take it a bit further as they have real metal frames real metal drive axles rubber tires etc.. $200 more initial cost for a 24v version but you’ll spend $200 just converting over from 12-24 on a regular powerwheels and always have to be buying gear boxes which aren’t expensive but at $20 a pop it adds up with time spent swapping them. For really young kids and the toddler 6v setups they still use regular 12v gears and motors and are just powered by 6v. They are super easy to upgrade to 12v which can be done for $20 or so. You can even take them to 18v as well but will need to swap from the 330 to the regular 550 motor (775 will not fit in most of them) but as they are so much lighter they have a lot of traction issues when bumping a 6v to a 18v setup.

Dad of the year award goes to you!

he is a great driver. well controlled around the trailer and truck too. great mod.

nice work man. kids getting an early start

Great little driver 👍🏽

Nice work Cole!!!!!!

that's freaking awesome man

looking at upgrading motors and gear boxes on my sons car as well, which motor did u get? trying to find videos to determine the best choice

That's awesome, just ordered my daughter a 12v Chevy Silverado for christmas, upgrading from her 6v quad she got for her second birthday, she picked up up pretty fast so I'll most likely be doing a swap at some point once the 12v isn't enough for her. I had a Big Foot power wheels as a kid, and that thing was my baby lol.

little dude getting arm pump lol too cool man

That's awesome man! Dude is owning the drifts. Seems like the video went on for a long time, so I'm assuming battery life is more than 5-10 minutes...?

BEST DAD EVER!!!

Hey man, I want to get a stage 5 motor/gearbox assembly for a power wheels quad. I noticed your son had the kfx and Ive got the same quad. I was wondering which motor/gearbox assembly you used.

the kids a natural! good job pops.

That thing is Hitting now !

best video of the day

This is awesome!!!

Hello, did you change the battery and cables too for the upgrated motor?

you are an awesome dad!

time to ad a pipe and programmer lol!! he is doing great!! I have video of my boy on his kawi 50 and I enjoy watching that as much as any of my other videos!! oh yeah and he needs sticker to decal up his ride haha

My son.has this quad and i tell eveyrone it's perfect for drifting bc of the throttle. Love this little quad

Wow your son is very good at driving, he’s a pro!

I just needed to know how to get those dang rear wheels off, and voila, you revealed to me the nature of the beast. Much thanks!

It was the leg goin up at the end for me 😂

Sweet Jesus, where in the world does grass get so crispy? Also, that kids got mad skills on the 4-wheeler

Where is you're father of the century award?! That's amazing man!

man those gears are loud!!! bet the neighbors LOVE your kid!!!

Nice vid I’ll be trying this out for my two sons

hi, which motor do you put for the upgrade ? thx ! from qc can

Madram11 how long did it survive with the new gears and upgrades? I have a 7 yr old that wants more power but also have a 3 yr old so I dont want to ruin the fun for the youngest if it dont last very long! This is absolutely amazing and thank you for being so detailed

@madram11 where did you purchase the new motors?

Talk about learning to drift at an early age ;))) that kid's awesome, yeah he did..!

also the reduction kit hows that work? wheres it go?

Next is tires. What an awesome video man he looks like he's definitely enjoying himself

I upgraded ours but before I did it burnt up the motor so no power to pedal nor the controller but everything else works. So I got 24v motor but still no power any idea??

He has good awareness and throttle control around vehicles. Smart for a kid his age. Just needs to work on not fixating when he's riding or he might up hitting a house like I did. lol. All in all that was a dang good freestyle session. The leg over the fender was a nice little touch. He will be busting heel clickers in no time.

I love how he can drift it awesome

Can you please tell me what size handle bars they are on the kids raptor ?

awesome video yo i showed my kid it

hey question for you i just installed these in my daughters dune racer along with the 24v battery upgrade and running in the high gear I'm only seeing maybe 10 mins of continuous runtime. are you getting that as well? thanks

Put some flex tape on the wheels for acceleration on cement lol

LoL, he looks like a real natural!

your boy is a natural!

Hey we have a huffy 24 volt torex atv ride in can we do the same thing except backwards? Replace battery with 12v to slow it down?

That is a cool ATV

hey boss I'm doing the same thing but how do i get the wheels off? thats my main thing. also how do you get the steering column off? I'm putting in a new circuit board.

Time to go brushless! That brushed motor probably won't last long at 24v! Your son is a natural!

look at him go daddy he's gonna be somebody soon in the racing community

How about the drive?? how did it handle it or did you had to upgrade the drive

Where did you order the metal gear box and 20v motors from?

doing what Dads do!!!!

Bout time somebody did this with a four wheeler

That's too cool. Where can I get the parts. My son has the lil doom buggy thing.

that is so freakin cool, lucky kid, i gotta get 1 w/roll cage 4 my grandson.

Do you know how to replace the steering linkage on the Kawasaki KFX? That is what is wrong with mine. I've been looking on youtube for instructions on that but, with no success.

What site could I buy those motors from and will the work on another power that isn't a 4 wheeler?

you should put like straps of rubber going across the tires that thing would go

I assume new motor black and red go to blue and orange on passenger side tire red is orange and blue is black correct?

i want to do the same thing to my sons quad what are the exact gears you got from mltoys.com for the 24 volt ?

I ordered new gear boxes one side goes forward the other side goes reverse. How can I fix that and I was told that both sides were the same and no different which is why I got 2. Ideas on how i can fix that?

no go pro on the bars yet huh? nice one cole

I did the same thing converted the same 4 wheeler to 24volt and it stripped the gears ordered new gear box but the original motor doesn't fit what gear box did you order or how did you find the right one all the numbers match the old gear box not sure what box I need the old motor is to big to fit in the gears

Though some bicycle treads in there and he’s in business

I wish they sold these ready built

Can u tell me what size motors they are and where I can find them.

I wonder how fast an frc sim motor would make it

I know this is a two year old post but my son has one of these power wheels that's needing a new gearbox do you know what kit you got from mltoys?thanks for the video your son was killing it

true, love the tho

After all the work and parts would it have been comparable to buy a 50cc quad?

I wonder if you can swap wheels to rubber 🤔

I like the hand throttle, did it come with that?

were did you get the electric twist throttle

Mini Ken Block?

nice 😎

you can take some bicycle tires, cut the tread off of them wrap it around the Power Wheels tires and put some screws in between the lugs so they're not sticking up. 1 strip around the center of the front wheels will make it turn on a dime. 12" tires work great but any size could be cut down.

Should probably look into getting some rubber tires for that thing

I wonder would rubber wheels be too heavy?

I am upgrading my son's quad for his birthday which is coming up soon. He has the same one as your son, just the ninja turtle one. I've done a lot of research on 24 volt upgrades and I'm leaning towards ml toys stage 4 kit with their 24 volt conversion kit and brake reduction module. Can you please tell me how much modification you had to do to install two batteries? Also how did you install the brake module without keeping it exposed to the "elements"? Lastly can you please tell me how the gears and motors are holding up since the install? My son is going to be 3 and he is a little on the small side but he rides like a champ. I assume you never went with an esc system and I don't plan on it either. I figure with him being smaller the gears should hold up well. Do you get decent runtime with the 24 volts and stage 4 kit? I apologize for all the questions but you have the exact same power wheels for your son and I want to make sure I'm making the right choices before investing the money in my sons power wheels quad. I've heard some negative comments about ml toys but your videos seems to show positive results.

Talk about drift quad 😄

swap that brushed with a castle creations 1/8 scale or 1/5 motor

Needs some better tires

How long did the original plastic gears last?

Now you need traction on it. You can can cut the inside part of a 10" bike tire an put it on the atv

Where the last vid

super cool, 36 volts and it will roost

Needs a back neck brace to keep his head from pushing back

Bien

let er rip tater chip

are they spinning in opposite directions?

Drift YES

timing belts screwed to the tires.

How old is he??

How much did this cost

Now that you have added more power those wheels won't last long spinning on concrete. I might suggest making him some runner grips by riveting or screwing a piece of a bicycle tire onto the wheels. Or if you prefer to spin your tires still but don't want to kill the wheels maybe try screwing a piece of crazy carpet to the wheels to act as a shield, replacing when it wears through. Also I have seen electric kids atvs made by gio. they seem pretty good. my nephew has one and he seems to get some good use out of it