Upgraded WE Galaxy G Series

Рет қаралды 4,021

EMA

Жыл бұрын

I explain how to fix a few common issue with the WE Galaxy G Series and go over some worth while upgrades.

Пікірлер: 20

@werdnandrew5480 Ай бұрын

Your visual displays are magnificent, good lighting and steady hands. Thanks for the information.

@werdnandrew5480 Ай бұрын

Not everybody has to be a go hard to be a good tech or an entertainer, because it's the information that we seek even though it is entertaining. You have what it takes to help secure airsoft content for more than just rage quits or goofy disputes after all isn't it the equipment that gave us interest in the sport anyway.

@Chibibola 23 күн бұрын

How did u install the new trigger?

@supxmango9732 Жыл бұрын

I have the exact same upgrades as you. I just recently got my WE galaxy. I have an issue and can't find a fix anywhere. My trigger is stuck when pulling the trigger. It will only reset when i pull the blow back unit as if im going to fire it. It doesnt do this when shooting semi fire. But auto fire jusy doesnt work right away, unless i out a few round from semi firing, then switch the auto fire to get it to just shoot burst shots. Any tips? Thank you

@ema1671 Жыл бұрын

Make sure the screw that holds the bolt is tightened down with loctite. Also, make sure the trigger bar resests properly. The trigger will not reset if the trigger bar isn't functioning properly.

@supxmango9732 Жыл бұрын

@@ema1671 it wpuld seem my trigger bar isnt reset properly. Causing the chamber to either get stuck halway or the trigger getting stuck. I did t upgrade the trigger bar liie you said you did in yhe video actually. Also im really new to airsoft.

@leftodd 10 ай бұрын

how do you get that little bar out right above the trigger ? only thing holding me back

@ema1671 10 ай бұрын

Knock it out with a hammer and punch kit from the left side.

@shtankyleg4454 9 ай бұрын

Hey just wondering where did you get the 300% nozzle spring?

@ema1671 9 ай бұрын

www.empireairsoft.co.uk/we-galaxy-gbyb-300-upgraded-nozzle-return-spring.html

@shtankyleg4454 9 ай бұрын

@@ema1671 are there any 3rd party shipper within the U.S.?

@ema1671 9 ай бұрын

hadronairsoftdesigns.uk/hadron-airsoft-designs-dealers/@@shtankyleg4454

@velowelder6333 8 ай бұрын

The only issue I have come across after about 10,000 rounds was the extractor that pulls the loading nozzle back breaks because it’s cheap pot metal, evike sells a steel version that’s way better than the original and drops right in (WE galaxy part #71)

@ema1671 8 ай бұрын

Thanks, I just purchased one.