EMA

Пікірлер

@Chibibola 13 сағат бұрын

How did u install the new trigger?

@TacoSlayer06 8 күн бұрын

I’m new to gas guns and I just have an SCW-9 with the b&t mags. Should I do that purging trick before the start of each game day? I haven’t heard of it before, but it makes sense. Also, since the b&t mags have the straw, if I understand you correctly, they are hard to overfill because the liquid in the straw will start spitting out prematurely. I’ll probably give this video another listen through.

@ema1671 8 күн бұрын

@@TacoSlayer06 You only need to purge the magazine once of air since it will be empty of propane and only if air enters the magazine after that. The SCW9 magazine does not have a dual-stage valve.

@werdnandrew5480 9 күн бұрын

Your visual displays are magnificent, good lighting and steady hands. Thanks for the information.

@werdnandrew5480 9 күн бұрын

Not everybody has to be a go hard to be a good tech or an entertainer, because it's the information that we seek even though it is entertaining. You have what it takes to help secure airsoft content for more than just rage quits or goofy disputes after all isn't it the equipment that gave us interest in the sport anyway.

@yngkt2378 10 күн бұрын

whats up bro. Nice video! can you share the link where you bought this bb. Thanks

@ema1671 Күн бұрын

This is the website I got it from, unfortunately that Ceracote option is gone. www.proactstore.com/

@Sopeanuts 24 күн бұрын

Did you have difficulty taking the suppressor apart the first time? Mine seems like its red loctited and extremely difficult to open

@ema1671 24 күн бұрын

Yea I set mine in some boiling water to loosen it up. I can't remember if it had loctite but it was definitely stuck on.

@DEAirsoftJerry 27 күн бұрын

thanks for the video

@Achromedynex 27 күн бұрын

Hello, did you experience double feeding issues with these mags?

@ema1671 27 күн бұрын

No, I know of this being an issue some people have had with these mags that eventually goes away.

@DEAirsoftJerry 27 күн бұрын

Can you make a video of disassembling the magazine?

@ema1671 27 күн бұрын

It should be there now.

@chrisnightingale5529 28 күн бұрын

Question: I just got the MP5K PDW and straight out the box it seems to have a feeding issue where by the bbs tend to fall out the end of the barrel. It’s as if they are being pushed into far as putting one in manually works just fine and of course give it a little nudge forward and it falls out. So could your cocking tube mod help or is there something more fundamental going on with mine? Any suggestions would be much appreciated. BTW: Great vids as I have been watching all your MP5k ones while waiting for mine to arrive

@ema1671 28 күн бұрын

Rotate the hop wheel counterclockwise to add more hop. That should hold the BB. With zero or little hop the BB will fall out the barrel.

@chrisnightingale5529 28 күн бұрын

@@ema1671 Ahh yes of course - it's probably turned to minimum out the box - I will give that a try - many thx

@chrisnightingale5529 28 күн бұрын

And yes that was exactly it - definitely one of those "Doh!" moments

@myeonjochill9577 Ай бұрын

Can I buy only Suppressor separately ??

@ema1671 27 күн бұрын

I think OctagonAirsoft still has some in stock.

@myeonjochill9577 25 күн бұрын

@@ema1671 Thanks !

@khaido3478 Ай бұрын

Steel screw will always be better than Titanium. Titanium is much softer

@ema1671 Ай бұрын

Not all steel is harder than titanium. If you want a harder steel screw you need to find some stainless steel.

@anphetamindarius Ай бұрын

Hi, is the screw for bolt stop on your bolt is hard to unscrew?

@ema1671 Ай бұрын

Yes, use heat to loosen then unscrew.

@anphetamindarius Ай бұрын

@@ema1671 Hi, mind to share which grade of Titanium screw you used?

@polpavon9949 Ай бұрын

One question, what nozzle and npas do you recommend for the mp5k? I have seen the previous videos and you do not recommend the bow master one (I purchased it before watching your video and I regret it...)

@ema1671 Ай бұрын

I have another video explaining how to create an NPAS for the MP5.

@polpavon9949 Ай бұрын

@@ema1671 Do you use the original nozzle? I saw that you used the npass piece but it was metal

@polpavon9949 Ай бұрын

@@ema1671 ohh okeyy i see you use de bow npass, thx!!

@tin8682 Ай бұрын

Where can I buy like your MP5K stock

@ema1671 Ай бұрын

I bought that off a friend.

@jovannyfeliciano6604 2 ай бұрын

Did you had to sand down the red nozzle like you did on the original one?

@ema1671 2 ай бұрын

@sungyongahn9872 3 ай бұрын

Thanks for sharing, I purchased the trigger box and somehow I dropped it and every single pieces came out and I just kept them in and never touched them for 2 years.... Finally I assembled them and I can use it for the spare.

@TheHavnmonkey 3 ай бұрын

Just dipping my foot into non-oem mags.... Will this be compatible with AAP-01? I get confused by the elite force vs WE/TM g-series compatibilty nonsense.

@ema1671 3 ай бұрын

Yes, but it AAP01 expects a flat router and this magazine has curved routers. So you would have to swap the router to get optimal performance. Otherwise you lose a little FPS and bolt lock isn't guaranteed.

@TheHavnmonkey 3 ай бұрын

Awesome, thank you. That was one of the problems I was thinking I would run into.

@jovannyfeliciano6604 3 ай бұрын

Where can I get that piece that catches the nozzle and pulls it out of the hop up?

@ema1671 3 ай бұрын

Evike.com

@Chibibola 28 күн бұрын

@@ema1671can u link it exactly

@albertomartinandres4890 3 ай бұрын

I don't understand what you've done, you haven't really changed or modified anything, right? thanks and regards

@headlessproductions8908 3 ай бұрын

did you cerakote your slide?

@ema1671 3 ай бұрын

I purchased it online with a company that had used Cerakite brand.

@headlessproductions8908 3 ай бұрын

@@ema1671was it a private company? because VFC paints their slides instead of cera kote

@ema1671 3 ай бұрын

@@headlessproductions8908 Yes, the slide was sand blasted and Cerakote was applied.

@shotdog9908 4 ай бұрын

Is there any difference between the purple nozzle and the black aluminum nozzle?

@ema1671 4 ай бұрын

The purple nozzle has an NPAS, the black does not.

@dannycesmistruk5455 5 ай бұрын

have you had a problem with the nozzle carrier(slider)? mine looks really worn and it stick some times.

@ema1671 5 ай бұрын

No, I haven't had an issue like that.

@imrekrancsecz8077 5 ай бұрын

Thanks!

@imrekrancsecz8077 5 ай бұрын

Great!

@nexgen1176 5 ай бұрын

Have you had any issues with this so far

@kennebunkchunk.3703 5 ай бұрын

i turned on the transcript to count how many times you said "um" lmao

@ema1671 5 ай бұрын

Lol yea I noticed that when I was reviewing the video. It's a habit.

@ejrhodv 5 ай бұрын

Where’d you buy the nozzle and nozzle return spring from? I’m not having the greatest luck googling

@ema1671 5 ай бұрын

The nozzle came from Evike, the spring was from hadron in UK.

@user-yj8rg6er7k 5 ай бұрын

i have mine and want to upgrade it, what should I change on it?

@StetsonWade 5 ай бұрын

get an aap 01. thats the best upgrade

@Nivelle_le_Gris 5 ай бұрын

So what config do you use then?

@gabvyu 5 ай бұрын

hey man, was wondering where i could get that slide. looks awesome

@ema1671 5 ай бұрын

It's the original slide with bronze cerakote. Search "action!" on proactstore.com

@anthonyrs8137 5 ай бұрын

Great stuff, thanks a lot!

@MacMeaties 6 ай бұрын

Got 5 of these myself and they are slick. All the weight savings of guarder or prowin alu mags while being much cheaper and noticeably better cool down. Seriously considering getting more lol

@TheBigRat770 6 ай бұрын

What's it do?

@smokeinabag 6 ай бұрын

What kind of stock is that?

@kristanmartin6257 7 ай бұрын

Hey mate, got this coming. How was it to install? Any tight parts you needed to dremel or anything?

@racingdc9 7 ай бұрын

Can you remove the trigger without taking the hammer and other parts out first? I'm wanting to change just the trigger.

@ema1671 7 ай бұрын

Yes.

@velowelder6333 8 ай бұрын

The only issue I have come across after about 10,000 rounds was the extractor that pulls the loading nozzle back breaks because it’s cheap pot metal, evike sells a steel version that’s way better than the original and drops right in (WE galaxy part #71)

@ema1671 7 ай бұрын

Thanks, I just purchased one.

@user-jd4mm3pf9x 8 ай бұрын

Can you make a video of assembling that npas nozzle?

@ema1671 8 ай бұрын

There is a diagram on the Bowmaster Facebook page that illustrates the assemble of the v1 and v2 nozzle.

@britishbeef4890 8 ай бұрын

Hi EMA, I have this bowmaster but I haven't installed it. Currently I run the stock vfc assembly with a revancist .9J valve nozzle. Whats the best way to get adjustable fps or close to my limit of 1.15J. Thanks.

@ema1671 8 ай бұрын

If you have the BW Nozzle V2 with the purple rocket valve then you only need to modify the original nozzle to use the purple rocket valve.

@shtankyleg4454 8 ай бұрын

Hey just wondering where did you get the 300% nozzle spring?

@ema1671 8 ай бұрын

www.empireairsoft.co.uk/we-galaxy-gbyb-300-upgraded-nozzle-return-spring.html

@shtankyleg4454 8 ай бұрын

@@ema1671 are there any 3rd party shipper within the U.S.?

@ema1671 8 ай бұрын

hadronairsoftdesigns.uk/hadron-airsoft-designs-dealers/@@shtankyleg4454

@t-rexchannel 8 ай бұрын

Do you know which nozzle can replace for SCW9?

@ema1671 8 ай бұрын

Maruyama is releasing O.E.M replacement parts slowly but a nozzle is not out yet.

@codywladkowski2659 9 ай бұрын

Im just an airsoft tech, yea a shitty one

@metalrules638 5 ай бұрын

Bro’s on his period?????

@leftodd 9 ай бұрын

how do you get that little bar out right above the trigger ? only thing holding me back

@ema1671 9 ай бұрын

Knock it out with a hammer and punch kit from the left side.

@ProcrastinationConnoisseur 9 ай бұрын

Recently bought a VFC MP5K and the Bowmaster NPAS. Installed it after watching this video and I had even worse problems. Couldn't even get through one mag. It cycled weak on semi and purged the gas on full auto. Installed the original nozzle and everything runs smooth again. I do get the bucking wear with the standard nozzle though. Could it be related to the quirky bolt hold-open? I did the mag mods from your previous video.

@ema1671 9 ай бұрын

Original nozzle will contact the bottom outside of the bucking and even pinch a hole when the loader is under the bucking and the bolt is closed. This seems to be common and I haven't experienced any issues from it.

@britishbeef4890 9 ай бұрын

Seems like Bowmaster have released a 2023 improved version of the purple npas, would like your input on it as it seems you are very well informed on the vfc mp5. Im going to get one also and see what its like. Nice video.

@ema1671 9 ай бұрын

I will be making a video as soon as mine arrives.

@brimalloy1487 10 ай бұрын

Gen 1 or 2?

@rmtheg234 10 ай бұрын

That's gen 2.

@supxmango9732 11 ай бұрын

I have the exact same upgrades as you. I just recently got my WE galaxy. I have an issue and can't find a fix anywhere. My trigger is stuck when pulling the trigger. It will only reset when i pull the blow back unit as if im going to fire it. It doesnt do this when shooting semi fire. But auto fire jusy doesnt work right away, unless i out a few round from semi firing, then switch the auto fire to get it to just shoot burst shots. Any tips? Thank you

@ema1671 11 ай бұрын

Make sure the screw that holds the bolt is tightened down with loctite. Also, make sure the trigger bar resests properly. The trigger will not reset if the trigger bar isn't functioning properly.

@supxmango9732 11 ай бұрын

@@ema1671 it wpuld seem my trigger bar isnt reset properly. Causing the chamber to either get stuck halway or the trigger getting stuck. I did t upgrade the trigger bar liie you said you did in yhe video actually. Also im really new to airsoft.

@galaxychan4296 11 ай бұрын

Thank you so much for sharing, hope you will make another video of the trigger box of a5 in the future, cause mine had a pretty common malfunction issue which can only shot on full auto no matter I choose three burst or single shot and I don’t know how to fix it😢

@niscoism Жыл бұрын

The stock pins bend even with duster gas....

@ema1671 Жыл бұрын

Wow, didn't know that. Waiting on some parts to arrive from overseas to do more testing then I make an updated video.

@Neboekadnezar Жыл бұрын

Great info, thanks a lot!

Ең жақсы KZfaq

Пікірлер