Upgrading My Royal Kludge RK68 - Gateron Milky Yellow Holee Mod Keyboard Cherry Stabs | Samuel Tan
Рет қаралды 109,061
Күн бұрынI got my first Mechanical Keyboard the Royal Kludge RK68/ G68 recently and decided to mod or upgrade it so it sounds and feels better.
1. Added Foam
2. Cherry Plate Mounded stabilizers (Holee Mod)
3. Monochrome Keycap set
4. Gateron Milky Yellow (Lubed Krytox 205g0)
Stuff in the video
Royal Kludge RK G68
Shopee - invol.co/cl4quwm
Amazon - geni.us/IMgeiou
Foam
Shopee - invol.co/cl4qux7
Monochrome Keycap Set
Shopee - invol.co/cl4quxl
Cherry Plate Mounted Stabs
Shopee - invol.co/cl4quz9
Holee Mod
Shopee - invol.co/cl4quzm
Krytox 205g0
Shopee - invol.co/cl4quyh
Grey keycaps
Shopee - invol.co/cl4yrmp
The link to the deskmat!
Shopee - invol.co/cl4p4mp
Gateron Milky Yellow Lubed with Krytox 205g0 (RM1.20 per lubed switch)
- / branclicks
Custom Coiled Cable
- / silkeykbd
Follow me on my socials | Business Email - samueltan.business@gmail.com
Instagram @itssamueltan
Twitter @itssamueltan
My Gear
Camera - invol.co/cl4yb6t
Mic - invol.co/cl5bfhq
Equipment -invol.co/cl4yb6g
Timestamps (Contents of the video)
00:00 - Intro
00:10 - Stuff for modding
01:53 - Dismantling the Keyboard
02:16 - How to remove stabilizers
03:03 - Installing Stabilizers
03:33 - Removing the Plate
04:39 - Foaming the Case
05:05 - Removing the PCB
05:34 - Installing new Stabilizers
06:18 - Foaming the Plate
07:26 - Reassembly
08:00 - Installing the Switches
08:32 - Installing the Keycaps
08:59 - Before Mods
09:26 - After Mods
10:04 - Final Thoughts
10:42 - Outro
BGM - Home (Prod. by Lukrembo)
@staright2163 3 жыл бұрын
Thank you very much for also filmed how you mod this! It makes it easy to follow, plus your editing is on point! I am going to do the same thing you did on my RK68, using JWICK red switch.
@itssamueltan 3 жыл бұрын
Welcome! Just wanted to help everyone out
@limitzist 3 жыл бұрын
damn i love the keycaps and that braided cable 😳 hope ill get to upgrade my keyboard to something like yours in the future
@itssamueltan 3 жыл бұрын
It's all possible goodluckk!
@adamdanish9229 2 жыл бұрын
Nice one man it’s rare to find a keyboard mod youtube channel as good as this that’s from Malaysia. Keep it up! You gained a sub from me!
@itssamueltan 2 жыл бұрын
Thanks man! Hope you'll like my Content
@nurafifsuhaylnoorzaidi4037 3 жыл бұрын
Im planning to buy one of these and this video made me confirm my plan ahaha. Great vid!
@itssamueltan 3 жыл бұрын
Thanks bro!
@eenakulot 2 жыл бұрын
Nice vid! I was planning to get an RKg68 as well and try my hand at modding. This really helped:>
@itssamueltan 2 жыл бұрын
Glad I'm able to help, have fun with your build 🔥
@azeemjaafar14 2 жыл бұрын
Lovin the vid bro.. just how great it is to see malaysian doin this plus really helps with the links you provided 😍😘
@itssamueltan 2 жыл бұрын
Just trying my best haha hope to help everyone!
@YuiSenpai 3 жыл бұрын
naise! love your video quality man. need to upgrade my keyboard asap xD
@itssamueltan 3 жыл бұрын
thanks bro! have fun upgrading
@aisaromar8038 2 жыл бұрын
dude i dont even know we can buy pre lubed switches and stabilizers in Malaysia. thanks for the link man. i was searching for g68 luckily your vid get recommended. super helpful
@itssamueltan 2 жыл бұрын
Glad I could help, enjoy the hobby!
@beaudanner 2 жыл бұрын
wow, that's night and day. well done
@itssamueltan 2 жыл бұрын
Thanks! 🤣
@InanBaragas 2 жыл бұрын
Just started hobby in mecha keebs. Finally I found fellow malaysian here! greetings from Sabah!
@itssamueltan 2 жыл бұрын
Hi! Greetings from Sarawak 🤣
@itssamueltan 2 жыл бұрын
Hey Guys, it's RM1.20 for one lubed switch. I mentioned the wrong price in the video so sorry!! @BranClicks on IG
@arham_pk 2 жыл бұрын
What does rm stand for
@shaquilleoatmeal00 3 жыл бұрын
loving the "thock thock" sounds
@itssamueltan 3 жыл бұрын
My first thock thock keyboard 😢
@xxrelaxbrotherxx 3 жыл бұрын
thock thock
@saffanahazam4591 4 ай бұрын
thank you very much for this videos it helped alot
@itssamueltan 4 ай бұрын
Welcome!
@darrenlye6622 3 жыл бұрын
Omgs I love ur video bro keep it up ya 💓
@itssamueltan 3 жыл бұрын
Thanks bro 🔥
@farahnabilah3177 2 жыл бұрын
ive been putting my foam in the wrong place this whole time 😑 thank you for this video!!
@itssamueltan 2 жыл бұрын
No problems 🤣🔥
@kelvinkoay5942 2 жыл бұрын
Great tutorial!
@itssamueltan 2 жыл бұрын
Thanks!! 🔥
@syamilarif2172 3 жыл бұрын
Love your video!
@itssamueltan 3 жыл бұрын
Glad you enjoyed it!
@Edmundmon90 2 жыл бұрын
I just got my rk84 keyboard. Hahahah.. this video really helps. And good to see someone from kuching do a youtube channel about custom keyboard. Keep it up bro.
@itssamueltan 2 жыл бұрын
Thanks bro! Hahaha will try my best
@Edmundmon90 2 жыл бұрын
No probs!! Btw, idk if u still remember, but I'm the one who buy the keyboard cable from u last month. 😂
@itssamueltan 2 жыл бұрын
@@Edmundmon90 oh nice 🤣 hahaha I think I remember
@carldrickjunatan271 3 жыл бұрын
niceeeee! Keep it up!
@itssamueltan 3 жыл бұрын
Thanks!!
@muhammadqhadrisharkawi1641 2 жыл бұрын
Good video! Deserves a sub.
@itssamueltan 2 жыл бұрын
Thanks!!
@fitrisuhaimi4581 2 жыл бұрын
A very great video man and mine are already on its way. I'm planning to do the same mod as yours but using Gateron clear instead. As for the PCB foam that you're using, is there any hole that you need to cut by yourself to make it fits or it already came with the screw hole line up with the RK68?
@itssamueltan 2 жыл бұрын
The version I bought has the holes precut already, but if u get one that doesn't have the holes u can just use a penknife to pole a hole and screw in no problems
@itssamueltan 2 жыл бұрын
All the best modding!
@zampai 3 ай бұрын
the upside down spacebar is driving me up a wall
@itssamueltan 3 ай бұрын
It's the best way, you should try 👀
@Spacebarf 2 жыл бұрын
great video man! I am about to do my first modding to a keyboard using the RK68. Im going with something similar but black and green it's going to be like a hacker style. I am also going to get Japanese characters too just because I love the look. is it possible to reprogram the pg up and pg down to home and end in the software and then place the relevant keycaps there?
@itssamueltan 2 жыл бұрын
Hey, I think it's possible with newer versions, but have fun modding!
@zhadumshasheer 2 жыл бұрын
Good video, sounds like the keeb was doubled in price for accoustics afterwards. :)
@itssamueltan 2 жыл бұрын
Yeah, i was really surprised too
@zeithmamoru 3 жыл бұрын
Coming from clackers malaysia bro. your video always neat and cleaaan ✨ btw, the right shift and alt is 1.75u is it?
@itssamueltan 3 жыл бұрын
hey bro! Alt is 1u and the shift is 1.75u
@dhananjayadelfano9627 2 жыл бұрын
how are the quality of the keycaps especialy the black modifier ones ?, i am planning to buy a simillar one in the near future. great video by the way
@itssamueltan 2 жыл бұрын
Really great honestly, I love the theme and feel
@originalzul4276 3 жыл бұрын
nice bro
@toppaine4008 2 жыл бұрын
Cool video but I have a question, why do you put only a small amount of case foam in the keyboard but don’t put it until it’s all fit? Also I think you should put pe foam so it sound creamier
@itssamueltan 2 жыл бұрын
In a plastic case it doesn't really matter how much you use actually, and if you have the time and enough materials yes you can make it look good and fit everything. Yea PE foam does make it better too why not. 🤣 You can do anything you want this is just my method
@Abc-in9ej 2 жыл бұрын
underrated
@itssamueltan 2 жыл бұрын
Thanks! 🤣🔥
@frogi_hobbies 5 ай бұрын
hello sam! (im new... and also a new sub!) :D
@itssamueltan 5 ай бұрын
Hello! Thanks for the sub
@jace1601 2 жыл бұрын
Where did you get the keycaps at the start @0:13? The black & grey one. Are they stock?
@itssamueltan 2 жыл бұрын
No I got them from KBDFans, it's their grey keycaps
@bigboidanial6823 2 жыл бұрын
Hello, where did you get the black and white keycaps from?. I really like the keycaps
@itssamueltan 2 жыл бұрын
Hey I got it from KBDfans on Shopee, I believe it's on their website too!
@tripbitshooter6169 3 жыл бұрын
The board originally came with RK branded switches right? Was it able to fit the Gateron Yellows perfectly, without needing to crimp the pins like on an oetemu board?
@itssamueltan 3 жыл бұрын
Yeah no problems at all because it's 5pin
@sebastianarizaparra5490 2 жыл бұрын
@@itssamueltan in this keyboard, can i use 3 pin switches too? I think i Will Buy it but the switches that I want ate 3 pins I think, the akko CS or something like that.
@itssamueltan 2 жыл бұрын
@@sebastianarizaparra5490 yes 3pin will fit no problems
@JOELLZE 2 жыл бұрын
Hope do they look with shine through keycaps? Seems like a good switch especially when lubed but I wonder if the back lighting is effected badly
@itssamueltan 2 жыл бұрын
They look awesome with pudding keycaps or shin through keycaps, after lubed it still looks fine nothing is affected
@JOELLZE 2 жыл бұрын
@@itssamueltan Right that's great, I see you've used the Akko Rose reds. Gateron Milky Yellow or Akko CS Matcha?
@itssamueltan 2 жыл бұрын
@@JOELLZE hmmm I would suggest Akko if u don't wanna lube, if u plan on lubing definitely get the milky yellow
@SoulesOfficial 2 жыл бұрын
Since the RK68 backlight isnt the brightest, it gets a bit darker but not much
@megumi_0 2 жыл бұрын
do you know if the RGB lights will have any problems shining through with certain switches? I vaguely remember hearing someone say something about North facing LEDs or soemthing like that, which can be obscured by the switch...
@itssamueltan 2 жыл бұрын
Nah it's all good honestly, just some north facing RGB PCB might have problems when u use Cherry profile keycaps, that's all. No worries all switches actually fit almost 90% of PCB
@Istril 2 жыл бұрын
The after mods sound test sounds kinda weird, is it because that the PCB is north facing and you're using a cherry profile keycaps?
@itssamueltan 2 жыл бұрын
Yes but some worn have interference, so far mine are ok
@kichop 2 жыл бұрын
would it be more economically feasible if I buy the switches and lube them myself? or are the lube expensive? And is there any difference between foaming the plate and foaming under the plate?
@itssamueltan 2 жыл бұрын
yeah u can defi lube them yourself, it may be quite hard if u have alot to lube but have no tools, like switch opener, lubed, lubing statin etc. Foam under the plate dampens the sound when typing, foam in the case get rids of echo
@waisoon8144 3 жыл бұрын
do you think lubing is actually worth the time? I'm modding my first keyboard and doing everything from holee modding and converting it from wired to wireless. the only thing im hesitant about is lubing switches cause it takes alot of time.
@itssamueltan 3 жыл бұрын
Lubing will go a long way in mechanical keyboards, if u want a better typing experience and better sounds u should because it's worth it but If u don't really care how it feels and sounds u can leave it unlubed
@fatalwinja2065 2 жыл бұрын
For what it's worth I'm going to grab a set of bobas as I've heard they're some of the best out of the box and that lubing them only provides a very slight difference.
@Aphliz 2 жыл бұрын
@@fatalwinja2065 sometimes it comes very scratchy
@yuseong8971 Жыл бұрын
I'm pretty late but I was wondering what is the size of the stabilizers for the rkg68? I'd also like to do the same mods as yours but I'm not sure what size I should get
@itssamueltan Жыл бұрын
It's the standard size, 6.25u for the spacebar and 3 more 2u
@TheMessedUpMind 2 жыл бұрын
Does this keyboard have issues with the LED bulging out? Heard that this might cause incompatibility with some switches that do not have space for the bulge. Otherwise, great build!
@itssamueltan 2 жыл бұрын
Ahh no, RK G68 has LED under the PCB, the RK860 of RK100 has that problem
@TheMessedUpMind 2 жыл бұрын
@@itssamueltan so this keyboard wouldn’t have any interference issues with cherry profile keycaps?
@itssamueltan 2 жыл бұрын
@@TheMessedUpMind nope would work fine
@EngineeringSimplified Жыл бұрын
I am thinking of doing the PE mod but I read there is a risk of PCB short-circuiting. Are you still using this PE mod on this keyboard?
@itssamueltan Жыл бұрын
No, I recommend Poron tbh it's better
@chamr4291 Жыл бұрын
What keycap set is that btw Sry cuz ur description thingy kinda messed up
@itssamueltan Жыл бұрын
Hey umm I got it from Taobao but it's from KBDFans
@Creamy_ExePlayer 2 жыл бұрын
Seem you use cherry profile keycaps set for this How do you feel about it? Does it has any interference problem? As i know, this keyboard has south facing pcb, and most of south facing keyboard has interference problem with cherry profile keycaps
@itssamueltan 2 жыл бұрын
So far not at all, they are quite okay for my daily use
@milkman6712 2 жыл бұрын
hey could you tell me if the quality of those keycaps are good? since i was going to get them for a build
@itssamueltan 2 жыл бұрын
yes quite nice and thick
@eri5276 2 жыл бұрын
did you film the gateron yellows or just lubed?
@itssamueltan 2 жыл бұрын
Just lubed
@anonymouse9593 2 жыл бұрын
is there no cherry profile interference with the north facing switches ?
@itssamueltan 2 жыл бұрын
For some slimmer pbt, like non double-shot there's sometimes no problems
@ammarhilmi3761 2 жыл бұрын
Hi, I read somewhere where they said that cherry profile keycap will have an issue with north-facing led. Is that true? or it is only for gmk keycaps?
@itssamueltan 2 жыл бұрын
Mostly for some GMK that are Cherry Profiles, currently mine has no issue tho
@ammarhilmi3761 2 жыл бұрын
@@itssamueltan I see.. thanks though! Good video btw 👍🏻
@yuotosaka4561 2 жыл бұрын
planning to get those gateron milky yellows too and gonna pair it with doubleshot pbt keycaps which are cherry profile. in any case, would there be any interferences?
@itssamueltan 2 жыл бұрын
With Double-shot there's a high chance
@yuotosaka4561 2 жыл бұрын
do u have recommendations for budget linear switches that won't have interference with doubleshot keycaps?
@muhammadalfayedbinmohammad8871 2 жыл бұрын
Hi just wanted you opinion. Do you think the cherry mx brown is good for gaming and typing or do you guys have a better option. Thanks in advance 😊
@itssamueltan 2 жыл бұрын
Hey I would say they are good but now there are better options for cheaper, but if you don't want to venture u can just get cherry brown
@nasrulazizi1333 2 жыл бұрын
currently im looking for the transparent case for this keyboard. have u ever seen any of it?
@itssamueltan 2 жыл бұрын
Yea, u can search Project 65 on shopee, or my latest RK68 video
@juinalcones28 Жыл бұрын
There is no keycaps interference? Planning on buying the same keycaps set
@itssamueltan Жыл бұрын
There is a little but I don't mind it
@feather1512 2 жыл бұрын
Which keycaps were you already using in the video before you switched them out
@itssamueltan 2 жыл бұрын
KBDfans Grey Dye-sub keycaps, link in desc
@VikxMax 2 жыл бұрын
I recommend lubing the stabs cuz now you got some rattle. I hope you the best good luck
@itssamueltan 2 жыл бұрын
Oh I Holee modded it already it's fine now
@tzerxuan402 2 жыл бұрын
Will Gateron, cherry, kalih switch will be able to fit in the RK switch socket? If so, I dont have to buy the Gateron version if i want to change to switch to others?
@itssamueltan 2 жыл бұрын
Yes it will all fit from what I know
@tzerxuan402 2 жыл бұрын
@@itssamueltan Thanks :)
@borjph8117 Жыл бұрын
Do you know where can I download the software where I can change the backlit colors using sliders?
@itssamueltan Жыл бұрын
RKgaming.com
@RochTheReaper 2 жыл бұрын
Hi! I'm planning to mod my RKG68 however I'm wondering if there's a difference between a lubed/clipped/modded stock stabilizer vs a lubed/clipped/modded Everglide/Durock stabilizer?
@itssamueltan 2 жыл бұрын
Hi there's actually a very big difference, stock ones are not so tightly fitted but after doing alot of mods it can only be better but not better than Everglide or Durock stabs
@RochTheReaper 2 жыл бұрын
Oh I see! Thank you so much for answering!
@SoulesOfficial 2 жыл бұрын
There is a difference, but it's quite easy to get a thocky sound by using the Stock stabs. But i gotta mentions that it is a pain in the ass to holee mod the stock ones, since they are prelubed and u need to get the lube of the surface where you put the holee mod thingy. Sorry for the late answer tho
@bubucl 3 жыл бұрын
Hey nice video! May i know whr u get ur grey keycaps before the mod?
@itssamueltan 3 жыл бұрын
I got it from KBDfans Grey PBT DyeSub
@bubucl 3 жыл бұрын
@@itssamueltan i see, any shop u would recommend in shopee or lazada?
@itssamueltan 3 жыл бұрын
@@bubucl I added the link to the description check it out!
@bubucl 3 жыл бұрын
@@itssamueltan saw it, thanks!
@idle404 2 жыл бұрын
Are the keycaps cherry profile? If it's cherry, any interference?
@itssamueltan 2 жыл бұрын
Yes cherry profile and no, no problems faced with mine
@katcalpito7961 3 жыл бұрын
hi did u use 6.25u or 7u for the spacebar stabilizers? then 3x2u thank you 💓
@itssamueltan 3 жыл бұрын
its 6.25u and 3x2u
@katcalpito7961 3 жыл бұрын
@@itssamueltan thank you 😊
@husainyard 2 жыл бұрын
Is there a significant difference between rk reds and gateron milky yellows?
@itssamueltan 2 жыл бұрын
Very big difference
@amzet_513 2 жыл бұрын
do those milky yellows have the north facing interference?
@itssamueltan 2 жыл бұрын
With slimmer keycaps no, with thick pbt it Double-shot yes
@CleanSwip_ 2 жыл бұрын
2 questions, Is the keycaps cherry profile? and does the switches north facing or south facing?
@itssamueltan 2 жыл бұрын
Yes cherry profile, and yea it's north facing switches but no interference from mine
@CleanSwip_ 2 жыл бұрын
@@itssamueltan howw
@CleanSwip_ 2 жыл бұрын
@@itssamueltan yea and implanning to buy rk68 with akko rose red switches andakko macaw keycaps cherry profile does it fit?
@sgist7824 2 жыл бұрын
Great video thank you! Can you use the arrow keys as normal or does it need a modifier key? And does it have function key access to control music for example? I'd also want to upgrade the case to a wooden one, is that possible?
@itssamueltan 2 жыл бұрын
Welcome! To answer your question, yeah u can use it normally but there isn't controls for music sadly
@natesrubin 2 жыл бұрын
the RK G68 has dedicated arrow keys. It does have media play keys using a function modifier (he just added keycaps that doesn't show the fn mods)
@frenzy651 2 жыл бұрын
I have this keyboard and have one problem when typing. Often for each key, after being pressed, it keeps inputting even when the key has already de-pressed. Resulting in repeated character, until i reset it by pressing any random keys. Is this a major problem with the rk68, or is it a defect on my board. Anyone with same issue? Mine is stock not modded. All thoughts of modding are cancelled when this issue emerged.
@itssamueltan 2 жыл бұрын
Hey u can try pressing FN+ spacebar for 3 seconds to reset it if not u can try claiming the warranty
@maiskandar8358 2 жыл бұрын
Hello does the keycap has any interference since the pcb is a north facing one
@itssamueltan 2 жыл бұрын
So far mine has no problems because of the OEM profile keycaps
@reimon5410 2 жыл бұрын
Are your keycaps cherry profile? If yes then were there any interference with the north facing switches
@itssamueltan 2 жыл бұрын
Yes cherry Profile and no I had I no problems
@amzet_513 2 жыл бұрын
@@itssamueltan How would i know if my switch won't cause the interference?
@AUFartool 2 жыл бұрын
@@amzet_513 if it is see through or not (the bottom housing)
@WtfISLW 2 жыл бұрын
Where can you buy the keycaps besides the sight you provided
@itssamueltan 2 жыл бұрын
Honestly I not sure but I think AliExpress or banggood has them
@fahmiahmad7990 3 жыл бұрын
the sound test before and after using the same switch?
@itssamueltan 3 жыл бұрын
Sound test is before added all the mods and after
@ayushpramanik808 2 жыл бұрын
different switch
@cursedgrapefruit3570 2 жыл бұрын
Can you use screw in stabilizers like durock v2s in this board?
@itssamueltan 2 жыл бұрын
No, this board uses a plate mount so it wont support screw in ones
@syfqfzl 3 жыл бұрын
Baik gila 👌
@itssamueltan 3 жыл бұрын
Boleh Cuba also boss 🤣
@lehoan3736 2 жыл бұрын
did it have interference with gateron yellow and cherry profile keycaps?
@itssamueltan 2 жыл бұрын
Yes there is a lil, but these are clones so I think maybe its abit different? So I don't really feel it
@edwinkwong 2 жыл бұрын
Are screw in stabs like durock compatible with the RK68?
@itssamueltan 2 жыл бұрын
No, only plate mounted ones will for this build
@husainyard 2 жыл бұрын
which do you prefer, cherry or jwk stabs?
@itssamueltan 2 жыл бұрын
For plate mounted I prefer Chery, but screw in I always use Durock V2
@maru6ix304 2 жыл бұрын
does using a stocked mod stabilizer and cherry hv much difference on the sound??
@itssamueltan 2 жыл бұрын
Honestly yes, there's a big difference
@maru6ix304 2 жыл бұрын
@@itssamueltan does rk68 stabilizer pcb screw in, plate mounted, or snap in? can I use durrock for rk68?
@nicholaslau4456 2 жыл бұрын
Hi, for this keyboard is there any interference with the cherry keycaps ?
@itssamueltan 2 жыл бұрын
For me there wasn't any, but with thicker double shot pbt there will be
@nicholaslau4456 2 жыл бұрын
@@itssamueltan thank you, just for reference, how thick is your keycaps ?
@QAnyui 2 жыл бұрын
I'm planing on buying foam for this keyboard. Anyone know what's the right thickness of the foam for the keyboard case?
@itssamueltan 2 жыл бұрын
theres a link in the desc but aroumf 5mm would fit nice
@damiengoh6861 2 жыл бұрын
Are the stabilisers pre clipped?
@itssamueltan 2 жыл бұрын
If u get them stock, no u need to clip them yourself but it's quite easyy
@shrimp5428 2 жыл бұрын
how are you using cherry keycaps on a north facing pcb??
@itssamueltan 2 жыл бұрын
Hey some cherry clones don have problems with north facing switches
@jigs4120 2 жыл бұрын
If you're going to choose between RKG68 and RK84? What would you recommend?
@itssamueltan 2 жыл бұрын
if u need the fumction keys, f1 to f12 u should get the RK84
@MegaRichWay 2 жыл бұрын
RK84 has a slightly larger battery too at ~3800mAh vs ~3100mAh in the RKG68.
@gubpkt9016 2 жыл бұрын
Hows the connectivity? Any latetency for gaming?
@itssamueltan 2 жыл бұрын
2.4ghz no latency at all, Bluetooth has abit
@missy_naneylove3457 Жыл бұрын
Hi. Are all the links still can be use? I'm new at modding and really need help. I'm from Malaysia so can use Shopee.
@itssamueltan Жыл бұрын
Hey it should be still working fine, if you have any problems can comment here and I'll check it
@mukakanglupa8562 2 жыл бұрын
what keycaps before ur upgrade? the grey one
@itssamueltan 2 жыл бұрын
It's from YMDK link in description
@Samazing01 2 жыл бұрын
Hello! How did you get the switches to fit? I recall the RKG68 has large bulging leds?
@itssamueltan 2 жыл бұрын
maybe I have the newer model so the led are not the large kind, maybe u can check out akko switches, they have them already cut out for the led
@mellowwwy 2 жыл бұрын
After you remove the stock stabilizers at 3:01, can you just switch the stabilizers straight away at this step without having to further disassamble the keyboard?
@itssamueltan 2 жыл бұрын
U can do that if you're not using any plate foam, because the foam will block the stabs for the soacebar
@mellowwwy 2 жыл бұрын
@@itssamueltan alright, thank you for the quick reply!
@bonktoryu203 2 жыл бұрын
Can you change the Stabs without opening the board?
@itssamueltan 2 жыл бұрын
Yeap u can, I opened it because I wanted to add the foam
@verdysulaeman4601 2 жыл бұрын
Hey, I hope you still responds to the latest comments. Is it safe to unmount the plate from the case? Is there any advice that could lend me to do it properly, without causing any problems afterward ofc.. anwyway TIA!
@itssamueltan 2 жыл бұрын
It's very safe actually just have to be careful and take your time
@verdysulaeman4601 2 жыл бұрын
Yeah seems like it is.. okay then, thanks!
@jurovillafuerte7452 2 жыл бұрын
do u know if this has any plates I can use for it? was thinking of getting brass for it
@itssamueltan 2 жыл бұрын
Hey so far I can't find any yet
@jurovillafuerte7452 2 жыл бұрын
@@itssamueltan yeah ive been looking for one compatible with it, unfortunately none so far
@ItsjustAstolfi Жыл бұрын
Uh for the stab which you option?60 tkl or 2u only(sorry I'm new)
@ItsjustAstolfi Жыл бұрын
Also how much mm the foam to cover the hollow
@itssamueltan Жыл бұрын
60% or TKL would work, and the foam I suggest 1mm and below
@user-de4xh5mz6h 2 жыл бұрын
the spacebar looks a bit tilted?
@itssamueltan 2 жыл бұрын
Yeah I flipped it and realized it is abit tilted
@muhammadaliuddin9175 2 жыл бұрын
how do u find keycaps for this keyboard btw, since this is not standard bottom row, i found that finding keycaps for this is a real struggle.
@itssamueltan 2 жыл бұрын
Oh I get what you mean, I can suggest getting a full set of 130+, often times they already have all the keys u neeed
@muhammadaliuddin9175 2 жыл бұрын
@@itssamueltan ahh i see, thanks mate!
@muhammadaliuddin9175 2 жыл бұрын
@@itssamueltan i have another question, as for the plate, what material is it? is it brass or aluminium
@itssamueltan 2 жыл бұрын
@@muhammadaliuddin9175 it's just aluminium for the stock one
@muhammadaliuddin9175 2 жыл бұрын
@@itssamueltan ahh i see, im planning to buy a brass one, but its hard to find keyboards parts here in malaysia
@carlospang 2 жыл бұрын
Is the rgb led flat or pop out cause I getting one soon and modding it as well
@itssamueltan 2 жыл бұрын
It's flat and flush with the PCB
@carlospang 2 жыл бұрын
@@itssamueltan ooh ok thx
@maru6ix304 2 жыл бұрын
does gateron milky yellow have gaps on it? since rk68 hotswappable is limited (oly for switches tht hv gaps on it)
@itssamueltan 2 жыл бұрын
I honestly don't understand this, what do u mean by gaps?
@maru6ix304 2 жыл бұрын
@@itssamueltan rk 68 led lights kinda bulb out so mybe there is a reason why we can only use gapped switches? but since u r using the switches fine on rk68, it should be no problem at all..
@itssamueltan 2 жыл бұрын
@@maru6ix304 ah I think I know what u mean, newer versions of RK all have flush LEDs now so any switch can fit, but be careful with older versions they might have this problem
@maru6ix304 2 жыл бұрын
@@itssamueltan I see, thanks for ur information!!
@hisdesciples 2 жыл бұрын
Where can I get those keycaps and do I need to change the switch to add these keycaps?
@itssamueltan 2 жыл бұрын
No the original ones can fit the keycaps, I would suggest Shopee if you're in Asia but AliExpress and Amazon should also have them
@hisdesciples 2 жыл бұрын
@@itssamueltan I’m in US.
@hisdesciples 2 жыл бұрын
@@itssamueltan thank you
@dezoru1094 2 жыл бұрын
will durock's plate mounted stabs work on this?
@itssamueltan 2 жыл бұрын
Yeapp any plate mounted stabs will work
@dezoru1094 2 жыл бұрын
@@itssamueltan alright, thank you!
@damonke178 2 жыл бұрын
whered u get ur desk mat
@itssamueltan 2 жыл бұрын
From shopee, link in description
@steez1439 2 жыл бұрын
How many pins your gateron yellow bro?
@itssamueltan 2 жыл бұрын
it's 5 pin
@Z0niC101 2 жыл бұрын
How could I replace the case keeping the pcb
@itssamueltan 2 жыл бұрын
Hmm that is kinda hard but u can 3D print a case
@mariacharmanerosenaciongay1839 2 жыл бұрын
hows the interference with the cherry caps?
@itssamueltan 2 жыл бұрын
So far no problems
@cdy9567 2 жыл бұрын
did you change the case?
@itssamueltan 2 жыл бұрын
No I just flipped it
@johnrembo1585 2 жыл бұрын
interesting. mine comes with the kailh hotswap sockets on the pcb. i thought all rk g68 come with the same set of parts.
@itssamueltan 2 жыл бұрын
No really, theres 2 major factories that produce RK, for the US market and the Asia market
@johnrembo1585 2 жыл бұрын
@@itssamueltan ooooo got it.. perhaps that's the reason why they are not the same
@TaskForceStudio 2 жыл бұрын
@@itssamueltan May I know what's the main difference between US and Asian version for rk g68? Thanks!
swamp-w-cat
Рет қаралды 160 М.
KonzTech
Рет қаралды 96 М.
Samuel Tan
Рет қаралды 34 М.
GiaoHeo
Рет қаралды 2,8 МЛН