Thanks for the sub!

It did when I purchased the UpMap

Something I really wanted to do but I have no Dyno nearby. Good thing about the UpMap is that you can always reflash the bike to the original map

@@alvrsv4-vrod86 the difference is the dyno you need always to fix the air/gas mix so you need to put on “table” for roll up and get the results, with UPMAP you don’t need because is done already from the guy who’s already did this to get the map done, also on Upmap there’s all kind of map ready to download for any upgrade you have done , plus if something happens to your bike, and the dealer need your bike, you can download for free your factory stock map, otherwise on dyno it’s a pain in the uss to get back….

Thanks!

I’m confused here so is this the gabro tune you uploaded ? I’m ordering this and it says it comes with 3 maps so not sure which one to use

I used the wire connected to the ECU

Both!

I removed the servo eliminator. You can see the process in my video here: kzfaq.info/get/bejne/ldeSg6iXv9zdp4U.html

Hi! Is it mandatory to uninstal the servomotor?

Not needed

Thank you!

There should be a version for your bike with specific maps in the Upmap website

The good thing about the UpMap is that you can always change it to stock if you need to take it to the dealership. The bike will run way better after you do the flash.

I have the same issue but with a Race Ecu. Did you ever figure out what the problem was ??

But the dealer can tell how many times it's been flashed, thus warranty void if you ever need anything as Aprilia HQ will deny claims@@alvrsv4-vrod86

Yes

Guzzidiag for RSV4 will be a good option. There's a lot of info on apriliaforum.com

@@alvrsv4-vrod86 🙏 Thanks! This is what I'm looking at but probably both of them.

You can disconnect the device once you are done.

There is a map where you don't need to change the exhaust. The one I downloaded from Gabro's site is the one for bikes with aftermarket exhausts. You can keep the servo with the tune. Don't need to remove it.

Hi, i have now installed an Arrow slip on on my RSV4. Do'in the upmap as soon as i get it from italy. For Service i bring it to my dealer and because of warrenty i will re install the stock exhaust. Please can you tell me if the t800 saving the stock map automaticly and where in the app can i find that stock map? Thanks

They work on the 2022 model. It won't turn off the tail light. What it does, it doesn't throw any codes if you unplug the tail light.

@@alvrsv4-vrod86 thanks !

With an after market exhaust is recommended to have it tuned. My bike had some kind of sound like it wanted to shut off while idle. The new map fixed the issue and it feels more powerful in the mid range RPMs

@@alvrsv4-vrod86 so this is just a cheaper option? Rather than taking it to shop to get tuned?

Yes!

The ECU is still the same. There is just a new mapping for the Bike's ECU

Race ECU is just a std ECU flashed with same race-map file supplied free with upmap.

Thanks!

Once connected you can open the app and it will be the icon at the bottom of the screen.

In Revzilla.com. I am using the one for the 2020 models.

Mine did. I ordered the one with the Euro5 connector.

@@alvrsv4-vrod86 would you be able to send me the link that you purchased it from? Ive been looking on aprilia special parts but it looks like their upmaps don't include a cable

You can look at one of my videos where I explain how to change the foot pegs kzfaq.info/get/bejne/obSVnbuimK-Vgok.html

I did not. I still want to get the bike in a Dyno after the tune

@@alvrsv4-vrod86yea need see how it was b4 n after upmap.

I am not aware of the code change after the reflash

Don't worry about that. I've used it in multiple bikes and I haven't had any issues with the app. Good luck!