Userwish 8 - Ringspanner - Catia v5 Training

No video

Userwish 8 - Ringspanner - Catia v5 Training - Simple version

Рет қаралды 93,238

Күн бұрын

Userwish 8 - a ringspanner - first the simple version, I will do this in the other 5 programs as well. Then a more complex version. I will try to do the complex one also in the other programs. But it may not be possible in all of them. I know there is a "small" edge on the left side - because of the two sweeps meeting there. But it is just done "quick and dirty".
If you want to see more, please give it a like or leave a comment down below.
For better a overview regarding my youtube videos - head over to my blog.
My blog: www.walden-wolf...
My facebook page: / wolfgang.walden
My facebook cad page: www.facebook.c...
My LinkedIn profile: / 694
My Xing profile: www.xing.com/p...
My Video2Brain profile: www.video2brai...
My Google+ profile: plus.google.co...
Complete ordered list of my YT Autocad Trainings: www.walden-wolf...
Complete ordered list of my YT Autodesk Fusion 360 Trainings: www.walden-wolf...
Complete ordered list of my YT Catia v5/v6 Trainings: www.walden-wolf...
Complete ordered list of my YT Inventor Trainings: www.walden-wolf...
Complete ordered list of my YT Siemens NX Trainings: www.walden-wolf...
Complete ordered list of my YT SolidEdge ST Trainings: www.walden-wolf...
Complete ordered list of my YT SolidWorks Trainings: www.walden-wolf...
My old geman company website: www.wwmc.de

Пікірлер: 188

@dionismarku8272 3 жыл бұрын

Das war eine hervorrangende Übung. Vielen Dank, dass Sie Ihre Kentnisse und Erfahrung mit uns teilen.

@wolfgang.walden.cad.training 3 жыл бұрын

Danke fürs Lob :)

@gman5986 5 жыл бұрын

Hello Wolfgang. I just finished this Ringspanner tutorial and wanted to thank you for taking the time to post this, Cheers!!

@wolfgang.walden.cad.training 5 жыл бұрын

You´re welcome :)

@jccasava2035 3 жыл бұрын

Vielen lieben Dank für die Tutorials! Sie sind einfach der Beste, den ich kenne! Grüße aus Mexiko!

@wolfgang.walden.cad.training 3 жыл бұрын

Bitteschön :) Grüße aus Bayern.

@grafixcrew 8 жыл бұрын

Thank you for the video! I am a student and designing a mechanism. I find the video is really helpful and inspiring.

@wolfgang.walden.cad.training 8 жыл бұрын

+Nabil Imran Great :) - you´re welcome.

@nicholaidmetrivechsteinber9234 8 жыл бұрын

Herr Walden, thank you for the video. Your videos are incredible.

@wolfgang.walden.cad.training 8 жыл бұрын

+Nicholai Dmetrivech Steinberg Thanks, you´re welcome.

3 жыл бұрын

Thanks for the great videos, I am planning to watch the whole playlist.

@wolfgang.walden.cad.training 3 жыл бұрын

Great, you´re welcome

@ngocle8570 4 жыл бұрын

I'm from Viet Nam, your tutorials are amazing.

@wolfgang.walden.cad.training 4 жыл бұрын

Thanks :)

@aeternumarm 4 жыл бұрын

Thank you for all your effort!.. your presentations are very clear!

@wolfgang.walden.cad.training 4 жыл бұрын

Thanks for your praise :)

@ahmetates3527 3 жыл бұрын

I am getting an error at 18:53. The problem occurs when I add a sketch to the Guides section. The error is "A guide does not intersect one profile (or section)"

@wolfgang.walden.cad.training 3 жыл бұрын

The error message tells you exactly what your problem is: one of the guide curves doesn´t intersect/touch one of the profiles/sections

@hkverma6046 8 жыл бұрын

in this equation dia is section circle dia & trajpar is guide curve & slot is no of section &you know what is amplitude

@dionismarku8272 3 жыл бұрын

Herr Walden, Ich habe eine Frage: Wozu braucht man die diversen lilla/blau Knopfe in GSD? Ich meine, die jenigen, mit "Volume...etwas". Hab noch keine Video gesehen, wo man die benutzt. Ich denke, solche gleiche operationen macht man mit dem Flächen eher im "Part design"?

@wolfgang.walden.cad.training 3 жыл бұрын

Hi, diese "Volume" Features, verwendet niemand den ich kenne, deswegen gibt es auch nichts Wissenswertes dazu.

@dionismarku8272 3 жыл бұрын

Vielen Dank. Habe ich mich immer gefragt und gewundert. Aber ist besser so :)

@pradeeprenganathan3896 4 жыл бұрын

Nice Video on SPLIT Surface, Blend, Multisection with use of 3 guide curves

@wolfgang.walden.cad.training 4 жыл бұрын

Thanks :)

@nourediinnassar1937 3 жыл бұрын

Please, I want the download link for the models in the videos

@wolfgang.walden.cad.training 3 жыл бұрын

Live is no wish concert. I want a lot of thing, as well. And it doesn´t help to spam!

@hkverma6046 8 жыл бұрын

in proe by this equation -dia*sin(trajpar*360*slot)*amplitude

@rithinreddy3424 21 күн бұрын

why don't anyone show the dimensional drawing of the GSD?

@wolfgang.walden.cad.training 21 күн бұрын

Because those drawings look kind of strange

@christhjian9923 6 жыл бұрын

Hey, that was an excellent tutorial. However, I find GSD still quite complicated. Maybe you could walk us through all of the Sweep possibilities for example and some other construction features in the GSD environment? Just an idea, you've done amazing job otherwise :)

@wolfgang.walden.cad.training 6 жыл бұрын

Thanks. There is one especially regarding sweeps : kzfaq.info/get/bejne/esmIdMmh2JzQj6M.html I will do a remake in HD with audio soon.

@pratheeksthulasiram 4 жыл бұрын

Sir that was an amazing tutorial! But just wanted to know what is the difference between the sketch tool that we normally use and the positioned sketch?....just wanted a bit clarity and the advantages in opting for the positioned sketch option.

@wolfgang.walden.cad.training 4 жыл бұрын

Please watch my Catia v5 Basic Videos - you can control the orientation of sketch axis and sketch origin.

@pratheeksthulasiram 4 жыл бұрын

@@wolfgang.walden.cad.training For sure i'll watch it sir...thank you for the quick reply!

@hkverma6046 8 жыл бұрын

but in nx problem how to set this parameters by expression & what is use for guide curve

@fabriquecarlos7 9 жыл бұрын

Fantastic! Loved your totorial!

@wolfgang.walden.cad.training 9 жыл бұрын

Great :) you ´re welcome.

@gman5986 5 жыл бұрын

Hello Wolfgang, Can you tell me how to set up workbench bar you have at the top of your page that allows you to pick colors and line thickness, etc. I do not have that feature and would like to know how to activate it if possible. Thank you .

@wolfgang.walden.cad.training 5 жыл бұрын

VIEW->TOOLBARS->GRAPHICAL PROPERTIES

@hkverma6046 8 жыл бұрын

in model end point circle sketch along curve normal and sweep by expression

@Mediterranian1 5 жыл бұрын

Sir, i see that you already hideyour plane. But what is that lining on the beginning of your drawing? can u teach me how to get that? i can't follow your video becuase i missed the part where you get that line

@wolfgang.walden.cad.training 5 жыл бұрын

Please watch my catia v5 basics videos!

@hkverma6046 8 жыл бұрын

because section are sweep on along curve or guide

@milankovacevic1774 9 жыл бұрын

Regards, I follow all of your tutorials on youtube, and every time I thrilled with your knowledge. Do you have any manual or tutorial for advanced users in your release?

@wolfgang.walden.cad.training 9 жыл бұрын

Thx :) - what are you interested in?

@hkverma6046 8 жыл бұрын

in proe guide called trajpar this word linked by relation but in nx I am confused

@coldsin1569 3 жыл бұрын

How can i get the elements, prof?

@wolfgang.walden.cad.training 3 жыл бұрын

Which elements?

@ffernando13 8 жыл бұрын

I'm from Brazil, your tutorials are amazing... Ich sprache Deutsch auch...

@wolfgang.walden.cad.training 8 жыл бұрын

Thx :). you´re welcome.

@fernandorodriguezespinoza4649 5 жыл бұрын

I Mr. Walden. How could you make appear sketches, curves, lines, constraints, etc... on the tree but in blocs? I mean, a bloc of planes, a bloc of curves, a bloc of lines.

@wolfgang.walden.cad.training 5 жыл бұрын

Hi, a bloc? You mean a geometrical set?

@fernandorodriguezespinoza4649 5 жыл бұрын

Yeah, that's right.

@wolfgang.walden.cad.training 5 жыл бұрын

@@fernandorodriguezespinoza4649 ->INSERT->Geometrical Set. You could watch my GSD videos ;)

@fernandorodriguezespinoza4649 5 жыл бұрын

@@wolfgang.walden.cad.training Thank you a lot. Regards from México.

@arbaazkhan-mk1pk 4 жыл бұрын

Can you provide any link for the engineering drawing of this ring spanner?

@LeonardoLimaharvest 7 жыл бұрын

Très bien, j'aime beaucoup son tutorial...Merci

@wolfgang.walden.cad.training 7 жыл бұрын

Merci beaucoup

@snotool 8 жыл бұрын

Great video, but for some reason i don't have the geometrical sets you have in the Tree. Do you automatically add them through Insert? If so, why is that important?

@wolfgang.walden.cad.training 8 жыл бұрын

+snotool Hi, in shape design you have to organize your features yourself in the tree. So it is easier to find errors and to change the model. You have to insert it yourself and give them a proper name.

@snotool 8 жыл бұрын

Great thank you!

@hkverma6046 8 жыл бұрын

hello sir I am try in pattern but I think this type surface not possible in pattern . please see video last time sent you in proe possible by variational sweep & circle section variable by relation I think same possibly in nx but how to do cicle control by in expression

@wolfgang.walden.cad.training 8 жыл бұрын

+H K VERMA I see, yes ion NX you need for example for a helix an expression, it is odd I know. Take a look here: kzfaq.info/get/bejne/or1-icaLx8vcnGw.html

@vcleanandcaresolution8228 7 жыл бұрын

Hello Mr. Walden. I am facing one problem while drafting .. the dimensions lines are getting grey colour can You help me out of this

@wolfgang.walden.cad.training 7 жыл бұрын

Seems your drawing is not updated. Or you made your dimensioning wrong and lost the references.

@vcleanandcaresolution8228 7 жыл бұрын

thanks sooo much Mr. walden ..i understood my mistake what i did while designing

@wolfgang.walden.cad.training 7 жыл бұрын

You´re welcome.

@hkverma6046 8 жыл бұрын

yes it is flexible geometry model

@orlesp4734 8 жыл бұрын

Hello Mr. Walden, when doing the step on 17:21min the coincident line to the point of the symmetry surface recently created I just can't do it because when i get back to the sketch4 the symmetry surface recently created disappears. How can I make it stay there when i get back into sketch4? The next question I have, What does the extract function does (sound pretty silly due to the word meaning)? What are we extracting when we select the edges and Why? I really appreciate your time an effort,

@wolfgang.walden.cad.training 8 жыл бұрын

+Orl Esp Extracting the edges - a new element is created and it is selectable in the tree. And you should not use the boundaries of a surface directly. Why your symmetry surface is disappering - I can´t tell without your catpart, sorry.

@orlesp4734 8 жыл бұрын

+Wolfgang Walden Thanks for the answer regarding the extracting the edges. It is disappearing because the sketch4 was created before the symmetry surface, so when i get back to sketch4, it shows is as if the symmetry hasn't been created yet. and i do not know how to edit the tree so i can move the sketch4 after the symmetry. for now, I just created a new sketch (after the symmetry). I appreciate your comments.

@wolfgang.walden.cad.training 8 жыл бұрын

+Orl Esp Seems to me that you are using ordered geometrical sets. You should use geometrical sets.

@tmkc14 8 жыл бұрын

heyy , I got the same problem too but I found out that you can reorder the features by right clicking on them right click on sketch4 > sketch4.object>reorder>aftersymmetry.4

@wolfgang.walden.cad.training 8 жыл бұрын

In a geometrical set there is no historical order, just plain parent-child releations nothing else

@blue123456ization 9 жыл бұрын

Mr. Warden can you please do a few tutorials,where you explain various aspects and definitions of the terms used in sweep and daft command in CATIA GSD?? I like your tutorials,but I am unable to understand as to why you entered 90 degree as an angle or what is it meant by "limit curve" and tangency surface".When I use CATIA GSD I am confused by all these parameters,so everytime I start a new project in GSD and if I want to use these commands I have to use the iterative approach,where I experiment will all the commands and don't get desired results.It would be really helpful if you do a few vids on this.

@wolfgang.walden.cad.training 9 жыл бұрын

Hi, you know it is all about getting surfaces which are continous at least in tangency. I will see what I can do.

@blue123456ization 9 жыл бұрын

Wolfgang Walden Ok sir!! :)

@smarter2610 8 жыл бұрын

question outside of subject. Can youe explain why are additional axis are used in automotive and give maybe any tutorial when it's needed and when you using it ?

@wolfgang.walden.cad.training 8 жыл бұрын

+motivated Hi, I ´m not quite sure which additional axis you mean, could you explain please.

@rogeriobernardes1397 8 жыл бұрын

excellent tutorial

@wolfgang.walden.cad.training 8 жыл бұрын

+Rogerio Bernardes Thanks, you´re welcome.

@abhishekhiremath8955 5 жыл бұрын

When i define to curves the sketch part is missing which is circle 35 dia ?? How to overcome this one...

@wolfgang.walden.cad.training 5 жыл бұрын

Hi again, sorry what is your problem?

@abhishekhiremath8955 5 жыл бұрын

@@wolfgang.walden.cad.training hello sir When i do define in work project to the curves , the circle is not showing or indicating which is i already created in sketches ......is it any customize settings prbm ..?

@wolfgang.walden.cad.training 5 жыл бұрын

I suppose, only the body/set which is in work is shown. There is a switch in the bottom toolbar to enable/disable - 3 rectangular boxes above one another - disabled / one rectangular box in orange colour - enabled.

@abhishekhiremath8955 5 жыл бұрын

@@wolfgang.walden.cad.training thank u sir i got it

@abhishekhiremath8955 5 жыл бұрын

@@wolfgang.walden.cad.training i want to ask u one more question sir upto how much high salary we will get on catia design engg..In india

@hameedetemadi8390 7 жыл бұрын

IM FROM IRAN ....Loved your totorial.THANK you

@wolfgang.walden.cad.training 7 жыл бұрын

Great - you´re welcome.

@mojtaba.moghimi787 Жыл бұрын

Perfect

@wolfgang.walden.cad.training Жыл бұрын

Thanks 🙂

@makrofocus 8 жыл бұрын

I see when you are setting constraints, your constraint button is always active. Did you do that with a shortcut or is it a higher version of Catia then i have (Catia V5 r17)???

@wolfgang.walden.cad.training 8 жыл бұрын

+makrofocus Certain commands can stay active - just activate it with a double klick :)

@makrofocus 8 жыл бұрын

+Wolfgang Walden HA! Great! This really helps alot! Vielen Dank Herr Walden! :)

@makrofocus 8 жыл бұрын

+Wolfgang Walden Also, since I have your attention, can you point me to some tips and tricks for Catia(like this one)? Things that are considered trivial but speed up the modeling process and also what to do and what not to do or how to approach modeling in Catia? I have been using Solidworks for most of my engineering life but now I see I have been using the wrong CAD package since Catia is so much more powerful then Solid. I'm really keen on learning as much as possible so anything you can tell me is much appreciated! Again, thank you very much dear sir!

@wolfgang.walden.cad.training 8 жыл бұрын

+makrofocus Bitteschön !

@wolfgang.walden.cad.training 8 жыл бұрын

+makrofocus Hi, just watch all my videos, especially the basics. If you have any question, feel free to ask. Solidworks has its own advantages. But anyway Catia is still my favourite software.

@aliergin5869 3 жыл бұрын

very nice boss

@wolfgang.walden.cad.training 3 жыл бұрын

Thanks :)

@dineshagilan8012 4 жыл бұрын

Hi sir, I am learning many techniques from Ur tutorials.. Whenever u use "law" command in CATIA v5 .. I feel unclarity .. Will u make a special tutorial particularly on the command regarding its uses , purpose, the logic behind the command.. with basic examples . plz sir

@wolfgang.walden.cad.training 4 жыл бұрын

Maybe you should watch the videos in the knowledgeware playlist first?

@sakshiajitsinha6826 5 жыл бұрын

You have mentioned "simple version" this tutorial is in part design module or in GSD?

@wolfgang.walden.cad.training 5 жыл бұрын

It is in both of them.

@sakshiajitsinha6826 5 жыл бұрын

@@wolfgang.walden.cad.training But when u start the tutorial, it is with pard design?

@wolfgang.walden.cad.training 5 жыл бұрын

No in the beginning it is the GSD workbench, but it doesn´t really matter, you can switch between those two workbenches effortless.

@ruanrbm 6 жыл бұрын

Excellent! One question, how can I create the divisions: reference_elements; sketchs; curves and surfaces?

@wolfgang.walden.cad.training 6 жыл бұрын

Thanks, go to->INSERT->GEOMETRICAL SET

@ruanrbm 6 жыл бұрын

Wolfgang Walden thanks! But I'm having problem after doing that. I had create the geometrical set, but when I have one selected I'm not able to see the others. I already checked the hide/show option and they are in show. How can I fix that?

@wolfgang.walden.cad.training 6 жыл бұрын

Seems "only current body" is turned on - it is the symbol on the left side of the catalogue/book symbol.

@ruanrbm 6 жыл бұрын

Exact. Thanks!

@wolfgang.walden.cad.training 6 жыл бұрын

You´re welcome

@MrTPX09 9 жыл бұрын

Thanks for this great tutorial. Where could be possible to find video tutorials regarding rework from isolated solids and then extract surfaces + untrim and redesigning new concepts? I think this kind of tutorials should be nice also for designing tools . Example: Molding tools or Werkzeuge Kind Regards , Toni

@wolfgang.walden.cad.training 9 жыл бұрын

Hi, thx. You mean "reengineering" - I made some short ones. Playlist "catia v5 methodik" - Maybe I can do some. Otherwise try GOOGLE ;)

@MrTPX09 9 жыл бұрын

Wolfgang Walden Thanks, I have a look to your list. The typical examples are always reenginering with point clouds or from scanned surfaces. Best Regards

@zeeshan2k5 6 жыл бұрын

Brother, thank you very much for your videos, can you tell me how you make the tree like sketches, curves and surfaces? apart from that your tutorials are working perfectly with me. waiting for your reply

@wolfgang.walden.cad.training 6 жыл бұрын

"insert geometrical set" ;)

@zeeshan2k5 6 жыл бұрын

thanks sir, i got it in your videos. Insert>Geometrical set. thanks for the quick reply

@wolfgang.walden.cad.training 6 жыл бұрын

You´re welcome.

@srikrishnaindustries3888 7 жыл бұрын

sir,how to copy the profile of other part and insert it in some other part...please help me with this....

@wolfgang.walden.cad.training 7 жыл бұрын

Hi, you could copy the sketch - just select it, right-click - copy, switch to the new part, select the body and plane - right-click - paste and select the missing external references. You could also go for a powercopy.

@srikrishnaindustries3888 7 жыл бұрын

i'm getting trouble in splitting....

@wolfgang.walden.cad.training 7 жыл бұрын

In splitting? What do you want to split?

@srikrishnaindustries3888 7 жыл бұрын

actually sir, i want to copy profiled face only rest of the body will be a cuboid....so that the profiled component should rest on my new part in assembly...

@srikrishnaindustries3888 7 жыл бұрын

THANKS SIR, I GOT IT HOW TO DO IT.....THANKS A LOT

@hkverma6046 8 жыл бұрын

sir please help me this time iam confuse how to do please send a video tips step by step

@wolfgang.walden.cad.training 8 жыл бұрын

+H K VERMA Okay, you want it to be flexible, right? I understand your problem now. I will try to make a video.

@rameshsharan655 4 жыл бұрын

NICE

@wolfgang.walden.cad.training 4 жыл бұрын

Thanks :)

@nguyenangvinh4637 8 жыл бұрын

hello.making loud xyz axes ? thanhk you very much

@wolfgang.walden.cad.training 8 жыл бұрын

Sorry, what do you mean by "loud xyz axes"? - Tools->options->infrastructure->part infrastructure->register display there is a slider for the size of the axis.

@hkverma6046 8 жыл бұрын

hello sir I need some help how to create flexible corrugated pipe model in nx 10 by expression. please help me step by step

@wolfgang.walden.cad.training 8 жыл бұрын

+H K VERMA Sorry, I haven´t done pipe modelling in nx yet.

@hkverma6046 8 жыл бұрын

OK sir thanks to reply

@hkverma6046 8 жыл бұрын

I got some idea in proe by you tube in proe this type model creating by variational sweep section control by relation tool. I think i nx possible by expression but confusion is how to do

@wolfgang.walden.cad.training 8 жыл бұрын

+H K VERMA If you want to do a sweep - maybe you should consider one of the sections - take a look here: kzfaq.info/get/bejne/rbSTis97mteypX0.html

@nagarajudandu893 6 жыл бұрын

How to find devloped length for conic hopper

@wolfgang.walden.cad.training 6 жыл бұрын

Hi, what the hell is a conic hopper?

@nagarajudandu893 6 жыл бұрын

Simply think it as frustrum sir

@wolfgang.walden.cad.training 6 жыл бұрын

There is no length - if you unfold such an item it would have at least 3 lengths not just one length.

@Solidworker123 9 жыл бұрын

excellent!

@wolfgang.walden.cad.training 9 жыл бұрын

+fjavier serna Thx :)

@letterpower0802 8 жыл бұрын

thank you!

@wolfgang.walden.cad.training 8 жыл бұрын

+두성을 꿈꾸는 용수스 You´re welcome!

@AllaboutMotivation 6 жыл бұрын

can you make it anchor in generative shape design?

@wolfgang.walden.cad.training 6 жыл бұрын

There is already something similar there : kzfaq.info/get/bejne/g6qJgdmrud6neKs.html

@AllaboutMotivation 6 жыл бұрын

Thank you so much

@wolfgang.walden.cad.training 6 жыл бұрын

You´re welcome

@siddarthakadali7719 7 жыл бұрын

sir would u help me teach how to design a pet bottle cap insife threading

@wolfgang.walden.cad.training 7 жыл бұрын

hi, there are already some videos in my channel which show the basics - use a sweep and a helix as path. -if you need something special - please mail me drawing.

@siddarthakadali7719 7 жыл бұрын

ok sir thanku

@draval3289 8 жыл бұрын

Hi Wolfgang Walden, Your videos are really helpfull. Can you please give me some Reverse engineering(Flächenrückführung) video or upload it..Better in English.. Danke..!!

@wolfgang.walden.cad.training 8 жыл бұрын

Hi, right now I´m very busy, but I will see if I can do a video, but it will take a while for sure.

@jabarjungsingh3753 9 жыл бұрын

thank you so much. great

@wolfgang.walden.cad.training 9 жыл бұрын

You ´re welcome. I´ve done the SW model as well, video maybe tomorrow.

@jabarjungsingh3753 9 жыл бұрын

Wolfgang Walden ok great thanks

@abhishekhiremath8955 5 жыл бұрын

Hello sir can u teach for freshers in simple way

@wolfgang.walden.cad.training 5 жыл бұрын

Hi, go to my blog www.walden-wolfgang.de and do the basic training first.

@tabishfaizy7819 6 жыл бұрын

Hello sir I have one doubt to ask?? Please reply.

@wolfgang.walden.cad.training 6 жыл бұрын

You should ask, not ask if you can ask ;)

@tabishfaizy7819 6 жыл бұрын

Sir my components are same so I am thinking is it possible that I link a drafting drawing to another part which has nearly same dimensions and shape in catia. So that I do not have to do whole drafting again. If this could happen then I can save lot of time.

@wolfgang.walden.cad.training 6 жыл бұрын

Sorry, that is not possible.

@tabishfaizy7819 6 жыл бұрын

Ok thanks sir.

@tabishfaizy7819 6 жыл бұрын

One more thing your tutorial is more than awesome. I learned lot about CATIA by your tutorial. Thanks for making useful tutorials.