In this video I show how I use my DeWalt laser detector to help me find the laser line over a longer distance when transferring plumb lines from the bottom timber plate to the top one.
Пікірлер: 47
@gavincollins93762 жыл бұрын
Reminds me of days gone by. One at one end and my mate at the other end. "Left a bit, no right a bit, 2mm, and you there. " No, too much"...
@thetallcarpenter2 жыл бұрын
Been there Gavin😆Its so much more civilised nowadays🤩Thanks for watching😎
@kevinbowden11552 жыл бұрын
Can’t understand why I never thought to do this. Would save a few trips up and down to check if it’s right. Great tip Del and great channel by the way 👌
@thetallcarpenter2 жыл бұрын
Hi Kevin🖐It works a treat, and I think I'm going to buy one of those rotating, micro adjust bases to make lining the laser up a bit easier👊Thanks for watching bud😎Cheers Del
@paddy1202 жыл бұрын
Great tip del, I would of never thought to use mine like that, great tool,cheers 👍
@thetallcarpenter2 жыл бұрын
It works a treat Paddy👊 (my ears work better than my eyes now so this is awesome🤓) Cheers Del
@SteveAndAlexBuild2 жыл бұрын
Great piece of kit 😎🧱👍🏽
@thetallcarpenter2 жыл бұрын
I'm really finding it useful Steve👊Cheers bud👍
@SteveAndAlexBuild2 жыл бұрын
@@thetallcarpenter 🧱👍🏽
@TYLERCONSTRUCTION2 жыл бұрын
Great tip mate. It also helps when using the laser outside 👍
@thetallcarpenter2 жыл бұрын
Sure does Tyler👍Thanks for watching fella😎Cheers Del
@marcopetrillo68672 жыл бұрын
Good tip... and great camera skills!
@thetallcarpenter2 жыл бұрын
Hi Marco🖐I know bud, I'm using the zoom now and everything🤯😆Thanks for watching😎Cheers Del
@SuperWayneyb2 жыл бұрын
Could not be without a laser now 🤘😎🤘
@thetallcarpenter2 жыл бұрын
Same here Wayne👊Proper game changer😎Cheers bud
@user-fx7ic1tw6d2 жыл бұрын
Хороший лазерный приЁмник от DeWALT с "пищалкой" 🎶👍
@thetallcarpenter2 жыл бұрын
Hi there🖐Yes, my ears work better than my eyes now🤓Cheers Del
@tomprovan502 жыл бұрын
Hi great idea I have ordered mine to do just that. I have the Milwaukee 3 plane laser as it has minor adjustments which this one does not have and an offset cross line so a person can plumb a line to the ceiling and see the cross on the ground, great idea just need better tools
@thetallcarpenter2 жыл бұрын
Hi Tom🖐I think Milwaukee hit the jackpot putting the micro adjust feature on their levels👊It shows that they are really thinking about how their tools actually get used on site👍I'm jealous of your level😉Thanks for watching and your comment😎Cheers Del
@rockandmeatroll2 жыл бұрын
Have the same one, great tip, thanks.
@thetallcarpenter2 жыл бұрын
Bloomin handy bit of kit Sean, and I haven't had mine long👊Thanks for watching😎Cheers Del
@rockandmeatroll2 жыл бұрын
@@thetallcarpenter it's good alright the receiver, not the best though for outside big work(raft /foundation) I found out. Topcon all the way I'm afraid.
@rockandmeatroll2 жыл бұрын
@@thetallcarpenter brill use of the receiver, will be v handy 👍👍👍
@thetallcarpenter2 жыл бұрын
@@rockandmeatroll My eyes arnt that good at the best of times Sean, but my hearings still ok😁
@thetallcarpenter2 жыл бұрын
@@rockandmeatroll I agree mate, and this little receiver together with the laser is definitely not a pro outside setting out set up🤔
@HogeN13372 жыл бұрын
ahh the fiddle to line up a laser without the microadjustbase is fun... turn 4mm at laser you think and it move 10cm other end ^^
@thetallcarpenter2 жыл бұрын
We all have the same issues😬Apart from Milwaukee laser owners, as thier levels have a micro adjuster base which is AWESOME👊Thanks for your comment and for watching 😎 Cheers Del
@grantscully43572 жыл бұрын
I use 2 hilti dot lasers they are designed to fit over the floor plate so you just push up to floor plate one either end, dewalt do one as well lot cheaper
@thetallcarpenter2 жыл бұрын
Hi Grant🖐That sounds brilliant mate👊then just join the two dots with a string line 👍 Time to go shopping🤑Thanks for your comment 😎 Cheers Del
@LeeTillbury2 жыл бұрын
Great Del. Does that detector work on just dewalt or all red and green lasers?
@skiiddy2 жыл бұрын
Only with a red if you’re using red and you need a green detector for a green laser.
@thetallcarpenter2 жыл бұрын
Hi there🖐As Simon says, you need to have the right receiver for your lasers colour, but also this receiver doesn't work with earlier DeWalt lasers👊Cheers Del
@thetallcarpenter2 жыл бұрын
Spot on Simon👍
@1987pagey2 жыл бұрын
Exactly how I do it 😊
@thetallcarpenter2 жыл бұрын
Nice one David👊This laser receiver has been worth every penny👍Thanks for watching😎Cheers Del
@1987pagey2 жыл бұрын
@@thetallcarpenter I couldn't work without h a laser nowadays
@thetallcarpenter2 жыл бұрын
@@1987pagey Absolutely the same here David👍
@Ayeboi111 күн бұрын
Would you not be quicker with a chalk line for laying out?
@thetallcarpenter11 күн бұрын
Hi there🖐I use a chalk line to mark for the top plate once I have got the laser in exactly the correct position over the bottom plate👍Cheers Del
@Ayeboi110 күн бұрын
@@thetallcarpenter aye aye got you I did the same the other day I have small laser level but only projects 150mm angle so doesn't run a full width of a room Lasers are good at some things but the slightest of adjustment and your way out haha Sometimes more hassle than they are worth
@MrAidanfleming2 жыл бұрын
Do the receivers work with any laser?
@thetallcarpenter2 жыл бұрын
No Aiden😬The laser has to be of a certain type to suit the receiver. This receiver didn't work with my older DeWalt laser👍Cheers Del