Using a Snap-On Vantage Pro Labscope

Рет қаралды 17,206

TSTseminars

8 жыл бұрын

"G" Jerry Truglia using a Snap-On Labscope

Пікірлер: 15

@OneManOnFire Жыл бұрын

While I know this tool and video is old. Would say the Vantage pro is a good affordable dvom in 2023?

@scraiga66 8 жыл бұрын

Under tools you can set which CF card to save to. Obviously, the Vantage Pro in the video is set to save to CF-2. If you don,t have a card in the CF-2 slot, you can set the tool to save to CF-1. Be careful though, the OS is on CF-1.

@gtruglia2720 8 жыл бұрын

+Steve A Thanks for your input

@fire7765 6 жыл бұрын

Great video

@TSTseminars 6 жыл бұрын

Thank you for your comment and for watching...If you have not already subscribed to the tstseminars KZfaq channel please do so. Have a great day

@billrimmer5596 8 жыл бұрын

That was a fantastic video. I have a Vantage Pro and I am trying to get it. This really helped. I wil b watching over and over. It's nice c ing u hit the buttons too!!! Thank u

@gtruglia2720 8 жыл бұрын

+Bill Rimmer Bill thanks for teh nice comments...glad we could help...thanks for watching

@ovwok 7 жыл бұрын

Bill Rimmer how's that vantage treating you?

@billrimmer5596 6 жыл бұрын

Good evening G. I was using two channels to look at the 18x and 3x on an 05 3.8 Buick. When I put a trigger on one channel, I can’t seem to put one on the other. Can u set a trigger on both channels at the same time? Thank u very much!!

@matutenoel4833 8 жыл бұрын

good video amigo exselente video

@gtruglia2720 7 жыл бұрын

thank you

@tecnaman9097 8 жыл бұрын

Hi Jerry my Vantage Pro only list a couple of printers none of which I have. Can you load other printers onto the scope? I haven't come across anything in the manual..maybe I missed it.

@gtruglia2720 8 жыл бұрын

+tecnaman Sorry I am not sure...try posting this question on the Snap On forum on iatn they may know or contact Snap On. It's not the scope I use ...one thing I can tell you is that if you install a CF card in it and save the screen shot you can then remove the card and install it in a computer that has a CF reader or you can purchase a CF USB reader at a reasonable price at computer stores or online. Once you have it on your computer you can print to any printer...I do it from the Snap Verus scope as well as my Fluke and others....thanks for watching