This article describes why i use 2 capacitors of the same size: www.accelinstruments.com/Applications/WaveformAmp/Magnetic-Field-Generator.html this video is a proof of concept. More to follow...

Hi Master Ivo, any knowledge that can be explained with animations, is by far more powerfull and impact-full on peoples ability to forward your teachings than anything else, please have this in mind.

One more soul with a vision close to changing humanity forever.

You had me @ Ken Wheeler :) I am so happy to see someone approaching energy production with the proper mindset. You will advance rapidly if you comprehend Ken's book/video series. SUBBED!

You are so smart man! Love your work

If this works how i think it does, i'm gonna build a legit superhero suit one day when i'm wealthy

Ok, I see, this is similar to what I was thinking when I commented on another video, about a compound setup, use the back EMF to run another rig, using the EMF to power, or help power the first, not saying it could become self powered, but?? I have wondered why the emf was dissipated with a diode in electric battery powered cars and tools, it could be used! Atleast adding to the effiency! Great video!

Thank you for this informative video. Have you also studied starship coils?

Thank you my friend!

nice work

Hi, I will tell you something very interesting that results only from the practical work. This maximizes the effects of the N Tela two-wire coil. If for the construction of the coil you use multi-wire cable connects each wire separately from the other wire of the other cable. For this purpose use a multi-wire connector (ratchet). In this way each wire in the cable will behave like a two-wire coil. Basically in a flat coil you will have as many coils as there are wires in a cable. Tell me the differences observed. Good luck!

Hi Ivo Besides using the backemf/flyback/collapsing field energy to resonate a coil (injecting the stored energy at the voltage peaks does this???) You can also discharge capacitor to some sort of resistive, or inductive, or capacitance load, so you create some real power output from something normally wasted as you point out. To get a "gain" situation happening where the cap discharge to load does not reflect back to input draw (for example 1/4 watt let's say power in "back emf" cap discharge to load in consequence makes the input draw surge up to at least 1/4W maybe 1/2W so you have no gain in power) Solution is always have the capacitor disconnected from the steering diode that filled it. The backemf collecting capacitor the steering diode from misfet drain should always be "free" (by itself) when it discharges to load or else the discharge reflects back. Some engineers don't like to hear "back emf" when speaking about the flyback spikes, as backemf is different and is that inherent back force while the flyback spike is the kickback spike from the collapsing field....destructive transients is what else the call flyback spikes, especially when they see it as nuisance that destroys stuff with the sudden high voltage. Thanks for you videos they are always very interesting!

Back in 2008 , there was a circuit I read about that added 100v to the existing circuit that was going forward as pulse on/off 40V DC about 6amps. There was no capacitor. The part added was a sealed 60cycles AC relay in vacuum with dual inductors 1.6Millihenry each, of .6ohm. Diode in front of 1st coil L in series with internal diode in between L coils then that 2nd coil L in series with another output diode. Did this arrangement just happen to be lucky and obtain the needed extra 100volts forward? Back EMF forced forward as flyback voltage put to use? I have many inductors to practice with and I need to get just voltage to superimpose on to circuit line. 100v or a miniature autotransformer.

@master Ivo, definitly a huge and endless thank you bro,for all your videos,thats are clear and well explained,you learnt me SO MUCH brother!congratulation!...i can bring my own stone to your edifice: back emf can be also re oriented ,in order to help the rotation ;)

in my opinion hooking to the wheel work of natures problem has always been a diode that is FAST and can handle Current. The parts i see now are a choice of a high frequency diode or one that can handle current but there is always a trade off....The etheric change (vibration of the field) that happens in a collapsing dielectric field or magnetic field happens quick but there is lots of power in say the shorting of a coil or the discharge of a capicator..the other problem is storage of the field without losing most of it....Delta T plays a major part in the power given by the discharges...

thanx dude ur awesome

hello ivo i think you are in netherlands ? i do a lot of research and test with tesla coils etc etc i find out some very strange effects can i contact you more personal on email ? regards nik love your vids

i don't understand what was the goal you tried to achieve ?

If you don't mind, can you please provide schematic?

how much is the loss you get in the energy? or can you then keep it running whiteout input power?

What happens with a ferrite core in the middle?

E love you bro

What do you mean by saying "the bifilar coil is now resonant"? And is this circuit basically a joule thief?

Hallo Ivo, I'm a relatively a newbie experimenter and, I suppose, there are some people, like me, which could understand better your taught if you could provide a detailed schematic comprising the components's values, for EACH of your video. If you can, it will be enough to hand draw the schematics and I will digital transform them through a dedicated software (like Eagle, Proteus or a similar one), then you can collect and publish them on a dedicated space (e.g. Instagram or a personal website).

"elecric..." wow typo. I meant electric. And another one. "transformes"... transforms... my English isn't perfect. My old math teacher didn't give me an A+ because of my spelling, while the math was perfect. I guess he didn't make his point clear enough.

What is a bifillar coil?

Remember reading a patent from a dead man that said these coils could be used as scaler antennas that could recycle xl and xc. Le Chatelier's principal. Here's a look my friend www.gocs1.com/gocs1/Psionics/SCALAR-TRANSLATORS.htm

reverse the polarity

I think it would be helpful to also have a schematic while you are speaking.

I saw you commented on The Resonator on Green Wave, he is selling 2 pdf files for $50. One of them is his schematic he had on the video. The other was a copy of Patrick Kelly's Solovey's Power Application video. I hope you did not spend the money?

Kapagen principe?

Warp Field??? W=3c2

Your talks are NOT clear ! Please use a schematic to accompany your explanations