I have scoured the internet for a video and this one was the one I loved the most. I have watched this video probably 5-6 times in the last two weeks. I just started my painting on a panel and I love it so much. Thank you for making this video !!!!!!

By far one of the best videos on this. The up close footage is fabulous! Thank you!

I've watched many videos on faux brick and this seems the simplest technique. I want to try this. Thank you for sharing your process!

I enjoyed this video very much. You did a beautiful job with the white wash paint over the brick. Really makes the brick look more authentic. I may give this a try. I’m looking at doing a entry wall. This would be outstanding! Thanks for sharing.

Deidre, your wall turned out beautifully! I'm getting ready to tackle my faux brick panels. Thanks for the tutorial!

Cool project. One of the challenges with using drywall spackle is it doesn't flex as the panels expand and contract. For future reference, there is a latex caulk with fine sand in it, used for "grouting" lines between floor tile planks. At Lowe's it's found in the flooring section by the grout mix, and comes in different colors. Because it is basically a latex caulk, it will flex as the panels expand and contract.

Thank you for the video. Looked at others and they just seemed to tedious for the final effect. I kept thinking, couldn’t you just get that effect with some chalk paint? Finally, I found yours and I love the different example you’ve shown.

Thank you so much- we have it over the entire bottom portion of all our kitchen walls and this is a great way to update it before a complete Reno can be done. Your project looks amazing in your kitchen

I'm getting ready to do this in my kitchen as a back splash thank you for sharing.

Thank you for sharing! Just what I was looking for, yay!

I love this! I just got this same panel for my kitchen bar and I thought it was too dark. I am using the chalked paint to lighten up the brick panel. Thanks 😊🙏

That was my weekend project last weekend we left it like it was and it turned out awesome if we get tired of the loom we will whitewash it later....looks awesome

This turned out beautifully!!!

Im.songlad I found your video. This is the exact look I'm going for and you made it look so easy!! Thank you

looks good but terribly slow technique , probably averaging 30 seconds per brick ...... I would paint all the grout joints , let them dry , then paint all the bricks with a roller and wipe with a large , flat , maybe dampened sponge , get the whole thing done faster

So pretty!!!

So glad I found your channel! I've been looking for a tutorial on this! Thanks for the great video!

Absolutely, love it. Thank you, so much for such a wonderful video... I’m definitely going to use the faux brick panels in my kitchen and an accent wall in my bedroom. Thanks again Deidra. Your video was very helpful. =)

Wonderful job, thanks for sharing your tips.

Thank you for the video. I was looking for a tutorial on just painting it all white. Wonderful job. Thank you for sharing

I liked both looks and can't decide between them.

Can these panels be used for exterior?

Very helpful, thanks 👍🏽

Wish she would have shown the side to see how it looks on the corner and the connecting wall.

I think you could make caulk do whatever you wanted to. Ya baby !

Thank you 🙏🏼 just what I needed!! I loved the video so much !!! Ps: I don’t know what kind of person hits the unlike button to a channel who’s trying to help others

Great video!

Great video and instructions!

How do you cut out for your outlets?

Instead of having a straight edge for a seam , cut the 1/2 brick out the sheet , so it ends up looking like a jigsaw piece, then the seam should disappear , it's a little more work but worth it, love the wash look, but then the brick is really neat anyway .

Great work! Any tips on how to do corners? For example, putting faux brick on all sides of a square column.

Thanks for the great video!

did you get your panels at Lowe's or home depot?

Great explanations

Is it flat or a bit 3d?

Beautiful job! What type of white paint did you use? Have you seen any separation of the brick from the backing board due to getting it wet? Thx!

How do you handle the edges on the exposed corners of the wall?

excellent work

GREAT JOB!!!

Can you make a floor with the same material ?

How would I adhere this to a tile backsplash?

How would a horizontal seam within the mortar compare as it relates to the appearance? Also, did you have to move the outlet in the wall forward in order to put the face plate back on?

I love it! You mentioned you used brads for a less permanent upgrade in case you change your mind. What do the brads look like? How are they applied to affix to wall?

Wow, that really looks awesome...

sorry for not able to hear your voice currently on my old dated computer. it looks good

Love this. Do you have a link to the brick panels? I find it's really hard to do a search for proper raised brick panels. So many companies try to pass off photographic prints for proper texture.

So after spackling the seam is it just painted white? Or did you spackle the whole board and then paint?

Maybe if WE KNEW WHAT UR MISTAKE WAS.... IT WOULD HELP us not to make the SAME MISTAKE....LOL

How did you paint them white? Roller, brush or spray

Wood you do floors with this panel?

How does it work on an outside corner? Would I need to use trim over it? I'm curious of it would look ok or not.

What color have you painted your cabinets? It’s the exact color we want in our kitchen! We also want to do your faux brick technique for our backsplash. Just found you! Im binge watching!!!

20 years from now the people that buy our house will be thinking …..what the hell were these people thinking !!!!!

What color paint did you use on kitchen cabinets??

Awesome tutorial. Exactly what I’ve been looking for for my kitchen backsplash. I need 4 panels, I’ve only got one painted so far. Although a slow process, it’s the best way to achieve the look I want. So thanks for sharing! Ps. What did you use to seal it? I definitely want a few coats of some sealant, to protect from splatter from my range and my kitchen sink.

Those panels are perfect! Just want I'm looking for! Perfect color and textured,where did you get them from?

*perfect imperfections

Love this!

Did you remove the baseboards before installing?

Oh I bet you're good with Caulk Deirdre.

The white mortar looked to faux for me!

Is that brick panels ok for outdoor use?

im not very good at caulk. I just have a hard time getting it to do what i want it to do

Where can I find those faux brick walls can you tell me thank you. You did a great job looks great good video 👍👍👍👌👌

My caulk never does what i want it to do either!

Whatever happened to you? I love your videos! Blessings 🙏

If my main wall is concrete or brick how do I stick the faux brick wall onto my wall?

3:40 bbbaaahahahahahahah

Where did you get the faux brick?

hello, can you leave your email?

Lady you talk way too much nonsense, unnecessary repeating of yourself!

Great video!