Using IRs with TONEX ▷ How To Load • Using XRIRs • How To Reverse the Polarity

Рет қаралды 2,966

Күн бұрын

This video walks though the process of loading an IR onto a ToneX pedal using the ToneX software. Additionally, I address the issue of using Tone Factor's new XRIRs with their first run ToneX captures and why you may or may not find them useful. Lastly, I walk through how to reverse the polarity of an IR for anyone using 2 ToneX pedals in stereo (or any other device that uses IRs) and is experiencing issues with phase.
You can learn more about me on my website at the link below. In the near future I'll be releasing more content for the Fractal FM9 and my personal captures for the ToneX.
www.thetoneshepherd.com/
STRYMON PRESET BUNDLE FOR PRAISE AND WORSHIP:
www.thetoneshepherd.com/store...
Stay connected to The Tone Shepherd on Instagram for updates and other worship content:
/ thetoneshepherd
For more content like this, please like this video and subscribe to my channel. Leave a comment below to let me know what other content would help grow your heart and skill for the ministry God has given you.
- - - - - - - - - - - - -
Affiliate Links - Using these links gives YOU a discount and helps the channel as well. Thanks!
Lambertones 10% Discount
lambertones.store/thetoneshep...
Jet Pedals 10% Discount
jetpedals.com/?ref=GjRxZF7AG8...
- - - - - - - - - - - - -
GUITAR
Squire J Mascis Jazzmaster
- Stock Pickups, Wiring & Bridge
- Fender AVRI Vibrato
- GraphTech Tusq XL Nut PQL-5010-00
- Kluson Supreme Tuners
- Full Copper Shielding
- Neck Shim (0.5 Degrees)
- - - - - - - - - - - - -
PEDALBOARD
Cali76 Compressor
EHX POG2
RJM PBC6X
Shnobel Tone Daily Driver
Klon KTR
Benson Preamp
JHS Kilt v2
Great Eastern FX Focus Fuzz
Lehle Volume S
Sonic Research Turbo Tuner Mini ST-300
Revelation Effects Revenant
Walrus Slötva
Line 6 HX Stomp (for FX only)
Strymon - Mobius, Timeline, BigSky
(2) IK Multimedia ToneX
Pinstripe Pedals DISO+
Temple Audio Trio 28 Pedalboard
- - - - - - - - - - - - -
SECTIONS
00:00 Intro
00:50 How To Load IR on ToneX - Pt. 1
04:23 XRIRs with TF Captures
05:32 How To Load IR on ToneX - Pt. 2
06:27 Reverse Polarity of an IR
10:27 Conclusion

Пікірлер: 25

@jaydenhashimoto590 12 күн бұрын

This was so helpful! Almost went and bought the diso + not knowing I could invert the IRs for free! Thank you so much man! Truly a lifesaver 😎

@thetoneshepherd 12 күн бұрын

You got it! But...I will say, don't let this discourage you from snagging the DISO! It really does have a positive effect on your tone 🤙🏼

@gabrielaples6942 7 ай бұрын

thank you! if we bought tone factor presets do we need to buy those xrirs too?

@thetoneshepherd 7 ай бұрын

In my opinion, no. The XRIRs are best suited for other digital platforms at the moment. However, if Tone Factor decides to re-capture their amps and separate the head from the cab in the captures, then perhaps that would be the right time/place to use the XRIRs.

@christopherduvall7094 7 ай бұрын

Super helpful! Have you experienced phase issues with the TF Prosonic captures in particular?

@thetoneshepherd 7 ай бұрын

Here's what my tests revealed: In phase with each other: Princeton AC30 Benson JMI AC30 In phase with each other: DC30 Prosonic But the JMI, even though it's in phase with the others in that group, sounds best with the Benson. The other two pairings seemed perhaps slightly out of phase but still usable.

@christopherduvall7094 7 ай бұрын

@@thetoneshepherd I believe it’s out of phase with the rest of the amps. Is there any way to fix this on the pedal?

@Eivindbh 7 ай бұрын

Are we talking about the ToneX captures or with IRs? Like, if I want to run dual ToneX with TF Prosonic and AC30 or Benso, do I need to flip polarity on one of them?@@thetoneshepherd

@thetoneshepherd 7 ай бұрын

Not on the pedal. Only when using IRs and using the method I described. Also, see my previous comment--I edited it for a more complete list of which captures are in phase with each other.

@thetoneshepherd 7 ай бұрын

@Eivindbh I'm talking about stock TF captures. The Princeton, AC30, Benson and JMI are all in phase with each other. The DC30 and Prosonic are in phase with each other but out of phase with the first list. If pairing the AC30 and the DC30, you'll need to reverse the polarity of one of them and the only way to do this is via an IR with the method I describe here.

@beatsbyschrute7410 7 ай бұрын

Sorry for the dumb question. Does it matter which amp I pair with the XR IRs? I feel like the XR IRs aren’t at their full potential unless I match with the exact amp used in the capture.

@thetoneshepherd 7 ай бұрын

Not a dumb question! I honestly don't think there's a "right" and "wrong" way to use the XRIRs in this regard. These are not "Tone Matched" IRs so the particular amp they're paired with matters less. These, rather, are impulse responses of the cabinet/speaker/microphone only so you can definitely mix and match the amps. That being said, I think the most "natural" tone will be achieved when pairing a similar amp with a similar IR. But these kinds of rules are meant to be broken!

@seanbatterberry 4 ай бұрын

I must have an updated version of the ToneX software because I don't have a Player tab and everything looks a little different than yours. Also, my guitar sounds extremely small compared to yours when playing through these. I have a Gretsch Duo Jet with Lollartrons and, while I know it will sound different, I'm thinking I'm doing something wrong here. Any ideas? I have the Apollo Twin X as well and I'm running straight into the Hi-Z input.

@thetoneshepherd 4 ай бұрын

Yes, the ToneX software has been updated so it won’t match this unfortunately. The only thing I could think of regarding the tone is that your Cab/IR setting isn’t quite right. Are you experimenting with swapping IRs around?

@seanbatterberry 4 ай бұрын

@@thetoneshepherd I did try a couple different IRs, but even when I'm just on the Tone Model it sounds weak comparatively. My American Ultra Tele is the same way. It's just weak, lacks body and power. Your guitar and the audio demo guitars all just have much more body and power behind them. I have the input set to 8.5 like suggested. I just feel like I'm missing something. I'm new to ToneX and to the Apollo Twin X so it's very possible I'm just not doing something correctly. Any ideas would be greatly appreciated.

@thetoneshepherd 4 ай бұрын

How's the input level on the ToneX software? That could have a lot to do with it!

@axonathan 4 ай бұрын

So I can't load a bunch of IRs into the pedal to create/adjust presets on the fly in standalone mode?

@thetoneshepherd 4 ай бұрын

I believe you can.

@oleksandrk4853 7 ай бұрын

Is there big difference between 1 tonex vs 2 in stereo?

@thetoneshepherd 7 ай бұрын

The biggest difference is the ability to run stereo wet effects in front of the amps, which I prefer by a long shot.

@BobSince1981 7 ай бұрын

I have a second ToneX on the way. In the meantime I've been toying around with two ToneX VST running while testing out various Tone Factor, Tone Junkie, Worship Tutorials captures. I've been running a UA Dream 65 with everything slamming in front of it and really love it how it sounds. Using the Tone Factor drive captures with other drive pedals...ToneX Trio? 🤔 😂

@thetoneshepherd 7 ай бұрын

@@BobSince1981 Three ToneXs is not unreasonable 😎😎😎

@sihoon48 4 ай бұрын

how True Christian Guitar Player you are i know it is very dangerous to judge others but could not bear with some youtubers playing Christian Music impolite Verbal language and Tattos all over the body