Using RESIN in silicone MOLDS

Рет қаралды 61,602

4 жыл бұрын

In this video I will share how easy it is to use resin in silicone molds. I am using epoxy resin in my molds. I love making a lot of castings at once so that when I am ready to create I have them on hand.
Become a channel member - bit.ly/2V24hI1
In this video I will be mixing part epoxy resin and using some silicone molds to create some amazing embellishments that I will use for mixed media projects.
--- S U P P L I E S ---
• Epoxy Resin Crystal Clear
--- amzn.to/2WK88rS [ AMZUS ]
--- ldli.co/e/x0dol4 [ THB ]
• All Prima Moulds
--- ldli.co/e/1eldp1 [ SBC ]
--- ldli.co/e/dklq7m [ SSS ]
--- ldli.co/e/z29x41 [ ACH ]
--- ldli.co/e/9enmld [ JGG ]
• Amazon.com: Katy Sue Rusty Pipes Silicone Mold
--- amzn.to/2yGM6xO [ AMZUS ]
• Prima Finnabair Mechanica Silicone Mould
--- ldli.co/e/k2on44 [ SBC ]
--- ldli.co/e/7yk5p3 [ SSS ]
--- ldli.co/e/nxge06 [ ACH ]
--- ldli.co/e/6e92p2 [ JGG ]
--- amzn.to/3aG9clo [ AMZUS ]
• Prima Finnabair Cogs and Wings Silicone Mould
--- ldli.co/e/g6d1jn [ SBC ]
--- ldli.co/e/05m1nj [ SSS ]
--- ldli.co/e/4ed2p0 [ ACH ]
--- amzn.to/2WTUkLk [ AMZUS ]
• Prima Iron Orchid Designs Keyholes Vintage Art Decor Mould
--- ldli.co/e/2exzpm [ SBC ]
--- ldli.co/e/5ez2mx [ ACH ]
--- amzn.to/2JpapRw [ AMZUS ]
• Prima Finnabair Star and Moons Silicone Mould
--- ldli.co/e/3e1yrx [ SBC ]
--- ldli.co/e/ml6n4r [ SSS ]
--- ldli.co/e/e7xlo0 [ ACH ]
--- amzn.to/2qybuSU [ AMZUS ]
• Prima ReDesign Regal Findings Mould
--- ldli.co/e/qz20rx [ SBC ]
--- ldli.co/e/j4k604 [ JGG ]
--- amzn.to/2nY4NI9 [ AMZUS ]
• Re Design Butterfly In Flight Decor Moulds
--- ldli.co/e/yozlrp [ SBC ]
--- ldli.co/e/pd40q4 [ SSS ]
• Re Design Mariners Voyage Decor Moulds
--- ldli.co/e/r954rl [ SBC ]
--- ldli.co/e/o107gk [ SSS ]
• Surf Board Collection Silicone Mould
--- ldli.co/e/l5nr3g [ ACH ]
--- ldli.co/e/x0dom4 [ SBC ]
• Butane Torch
--- amzn.to/2BPC1Qr [ AMZUS ]
• Gloves
--- amzn.to/2ofWYKF [ AMZUS ]
•clear plastic cups
--- amzn.to/2YZL3UK [ AMZUS ]
• Craft Sticks Jumbo
--- amzn.to/2AqlhyZ [ AMZUS ]
Product list made with LinkDeli - linkdeli.com/e/m9ey7d
Social Media links
Become a channel member - bit.ly/2V24hI1
Follow me on Instagram bit.ly/2LTCCk2
Facebook - bit.ly/2U4ZCnu
Pinterest - bit.ly/2RSuMvI
tiffanysolorio.com
--------------------
Favorite places to shop
Scrapbook.com - shrsl.com/1l9uu
Simon Says Stamp - shrsl.com/1geuk
Ellen Hutson - bit.ly/2wgOpWJ
Tonic Studios - bit.ly/2PXBbVj
Joggles - bit.ly/2rLUtoR
Spellbinders - bit.ly/30pKLFo
Altenew - bit.ly/2Z0F7ZJ
Find out what my favorite supplies are bit.ly/2MdrcYL
__________
Music came from a free online website.
www.bensound.com
Some music came with the purchase of Filmora
----- DISCLOSURE -----
Compensated affiliate links are used when possible. Most products are purchased by myself. Some products get sent to me for review and use. All opinions are my own
#resin #epoxyresin #howtopourresin #siliconemolds #tiffanysolorio
I love to do it all. I share a lot of mixed media projects. I love using a lot of different mixed media techniques. I also love stamping and card making.

Пікірлер: 123

@Tiffany.Solorio 3 жыл бұрын

Hello friends! I share my tips on using resin. I am not an expert just sharing my experience and what has worked for me. I do want to make sure if you work with resin not only do you need to be in a well ventilated room but PLEASE wear a good mask to protect yourself.

@MatterofCrafts 4 жыл бұрын

I love making resin molds! There’s something so satisfying about unmolding them. The perfect look versus clay is so much better.

@Tiffany.Solorio 4 жыл бұрын

Thanks Jess. It really is.

@cindyhenry1410 4 жыл бұрын

Great video! Just starting out on my “moulding journey” lol. TYFS 💜🦋❤️

@AzaleaLuna 3 жыл бұрын

This was extremely helpful. I am interested in using resin in my molds and am a complete beginner, so having this video showing all the steps is perfect. Thank you.

@Tiffany.Solorio 3 жыл бұрын

Awesome. I hope it helps. I am no expert but I know what works for me. Thanks so much for watching!

@kelleyfreeman401 4 жыл бұрын

I'm going to try the resin! These turned out so well. Thanks for sharing!

@Tiffany.Solorio 4 жыл бұрын

Hey Kelley. Thanks so much for watching!

@kpearyeast 4 жыл бұрын

Thank you for the great tips on doing resin in molds.

@Tiffany.Solorio 4 жыл бұрын

Happy to help!

@marypolancodesigns 3 жыл бұрын

Tiffany, awesome video! thank you so much. I just got Resin in as well and can't wait to play! YAY!

@Tiffany.Solorio 3 жыл бұрын

Awesome Mary!! I can't wait to see what you create!

@savagetwin52 3 жыл бұрын

TU so much for this video. I will pull out my prima molds and gets to working.

@Tiffany.Solorio 3 жыл бұрын

Have fun!

@nanaof6babies 4 жыл бұрын

There's something very satisfying about unmolding plastic!

@Tiffany.Solorio 4 жыл бұрын

Very satisfying!! Thank you for watching!

@GodWins2Q24 2 жыл бұрын

I use wax, crayons, melt down and place in the plastic shells that snap together. 17.22 meters round I fine it very easy and I must say I love doing this. Just sharing. Im a new subscriber to your channel.

@joycegandy7305 4 жыл бұрын

Thank you for showing how to do this. I have everything to work with but never have started yet:-)

@Tiffany.Solorio 4 жыл бұрын

Glad it was helpful!

@KelseaKC Жыл бұрын

Very cute 🥰

@GodWins2Q24 2 жыл бұрын

I just started out making projectiles for my Byrna HD Launcher. I learning to make a mold 17.22mm round balls.

@annakickan 4 жыл бұрын

Can’t. Wait. 🎊🎉

@Tiffany.Solorio 4 жыл бұрын

Thank you for watching Annika

@maryv206 4 жыл бұрын

Good idea to cover with parchment paper!

@Tiffany.Solorio 4 жыл бұрын

Thanks so much for watching!

@wildpaisley6351 3 жыл бұрын

Wow love it. Do you have a video of how you paint and use your resin molds in your projects too?

@Tiffany.Solorio 3 жыл бұрын

Hello. Not a specific video no. I just either use Gesso and then use sprays or acrylic paint. I hope that helps. Thanks so much!

@SkyblueHippie 4 жыл бұрын

Yay! I also use clear epoxy resin for my prima moulds becuz I can't seem to find the milky colored one. Am sure I can learn something from your video. Would love to know how to clean the moulds though, the residue of the resin often stays in the tiny nooks and crannies, especially in intricate designs.

@Tiffany.Solorio 4 жыл бұрын

Hey there. I hope you found the video helpful. Thanks so much for watching!

@cmstokes08 4 жыл бұрын

I love watching you use moulds and I've decided to jump into the process. What are a few moulds you would recommend for a beginner?

@Tiffany.Solorio 4 жыл бұрын

Hello!! Thanks so much! I think it depends on your style and what you like. It is really hard to say. Sorry I can't be more helpful.

@agamirkowska 4 жыл бұрын

I prefer polyurethane resin and I used some metal package after pate. This package is elastic enough to do some kind of a nozzle and it's easier to pour the reisin into molds. The epoxy is nice beacuse it's colourless - I have to try this one either :) Thanks for that film!

@Tiffany.Solorio 4 жыл бұрын

Thanks so much for the info. I appreciate it. Thanks for watching!

@staceyrivera475 2 жыл бұрын

Thank you for sharing Tiffany. You are so very talented and I love learning from you. It’s such a joy. Question, as this is first time watching this process. Do you have to use the torch? Or is it an option if you are only looking to remove the air bubbles? If you are painting them, can you avoid that step?

@Tiffany.Solorio 2 жыл бұрын

Thank you so much!! A heat gun works as well. I hope that helps!

@nadiaponzo2372 2 жыл бұрын

Have you ever used the resin to fill larger mold pieces? For example, say a hand shaped one, not flat on one side, but the entire hand? Wondering if that may work, or would you recommend something else? I’m interested in creating an entire hand, that is colorless. And what would you recommend to use to create the mold (such as alginate, silicone, etc) to fill with the resin?

@jodimartin4250 4 жыл бұрын

Found this very helpful but I would like to know how or if you clean molds after.

@Tiffany.Solorio 4 жыл бұрын

Hello Jodi. No need to clean them really. There is a little resin but it just comes right off. Thanks for watching!

@BreAnnloveland 4 жыл бұрын

Well now I have to try this. 😂

@Tiffany.Solorio 4 жыл бұрын

Yes! You need to!! Thanks so much for watching!

@zuzuspetals1977 Жыл бұрын

What is easier to use resin or clay or ? .. new to this looking to redo dressers in flowers 🌸 ..which stays in tact best ( doesn’t break ) what is most cost effective? Lastly what is best glue to adhere. ANY help from anyone appreciated. Thanks PS please list anything you think I may have forgotten. Looking to do on dresser at home & also to gift dresser for baby 1st Birthday next month. Thanks again 🌷🌸🌺

@KrissTana-z2c Күн бұрын

Hello, I just watched two of your videos for the first time, couldn't comment to thank u on how to make your own silicone, the one reisn didn't give u perfect ends. I would like to know where if Amazon brokering these silicone molds I ve seen here, cause I failed to findem , I am in Jordan Middle East. Thank you so much.

@beckychristian2388 3 жыл бұрын

This was very helpful....thank you for sharing it! I make dollhouse frames from silicone molds and have always used a 2 part "liquid plastic" It has a set time of only 3 minutes so it makes it difficult to pour many at a time How long do you have with this resin? I'm also curious how the finished product compares with liquid plastic. Durability and finish etc. THANK YOU!

@Tiffany.Solorio 3 жыл бұрын

Dollhouse frames sound so fun! The resin takes up to 48 hours to cure completely. I hope that helps. Thanks so much!

@nishimudgal1333 2 жыл бұрын

Is Resin and hardener both have to be equal.?

@monique040472 3 жыл бұрын

hi what is the name of the mould with the crowns bugs and butterfly mould?

@kariann226 3 жыл бұрын

Hi there thanks for sharing this! My questions are can u add inks, paints, powders to the resin while in the molds or do u mix first with color then pour? And is there a special non stick spray or product you have to use to get the resin to pop out once cured? Thanks much!

@Tiffany.Solorio 3 жыл бұрын

Hello Kari. Yes you can add pigment powders, glitter, paints and more. I am unsure the ratio though. There is a mold release spray. I have never used it but this one seems to get good reviews. amzn.to/3qLUL7n Thanks so much for watching!

@witharooj7225 2 жыл бұрын

How much quantity of hardened and resin?

@selenabennett9578 4 жыл бұрын

This was a great video. I just getting into moods...what do you use to colour the resin after?

@Tiffany.Solorio 4 жыл бұрын

Thanks Selena. I will add white gesso to them and then I can add whatever medium I want to. I hope that helps.

@16asiabasia 3 жыл бұрын

@@Tiffany.Solorio can you do video of you doing that? Please

@inspirationr2 Жыл бұрын

Hi, I love your videos... watching from northern Canada. Was wondering if you could tell me the brand of the gloves you're using in this video. It does not come up on Canadian Amazon. :-) thank you

@Tiffany.Solorio Жыл бұрын

So sorry for the delay. The black ones are my husbands. I think he gets them at the store in the automotive section.The brand is Venom.

@inspirationr2 Жыл бұрын

@@Tiffany.Solorio thank you so much 😊

@erinroefitness 3 жыл бұрын

hi, how long did you let it cure that it's still flexible to add to bottles? thanks!

@Tiffany.Solorio 3 жыл бұрын

Hello. It was about 5 or 6 hours. It will vary for every brand and also the climate you live in. It is hard to give an exact time. Because sometimes I pour the resin and I have to wait 12 hours to get it out. You can always test it but trying to remove the piece. Sorry I can't be of more help. But I hope this helps even just a little bit. Thanks for watching!

@tisabrowne5949 4 жыл бұрын

Tiffany do you know if you are able to add color to the resin? If so what type of color medium would you use? Loved your video. I can’t wait to see what you make with the resin pieces.

@maryv206 4 жыл бұрын

I add acrylic paint and mix it so that ideally there are no more bubbles 😊

@agamirkowska 4 жыл бұрын

I also used the powders : like color glows from 13 arts or magicals by Lindys ;) (but with polyurethane resin :)

@Tiffany.Solorio 4 жыл бұрын

Thanks for watching TIsa! I see some viewers have answered. I love coloring resin.

@amber0307 2 жыл бұрын

You can use mica powder (Arteza do packs with lots of colors) or alcohol ink.

@redshoesgirl 4 жыл бұрын

we always called those bigger sticks - tongue depressors, like you get at the doctor's office. i've never seen a popsicle big enough for those sticks!

@Tiffany.Solorio 4 жыл бұрын

Yes you are right! LOL! Thanks for watching!!

@sahar1usa 3 жыл бұрын

in the previous video you said Resin didnt give good result in silicone molds , which is i need but what kind of silicone mold r u using? did u make those silicone molds?

@Tiffany.Solorio 3 жыл бұрын

There is one video where I made the molds yes and the resin would not cure. The Prima molds and store bought silicone molds work great with resin. I hope that helps! Thanks so much!

@Ali-H3444 Жыл бұрын

Just curious why you didn't color the resin? You can use acrylic paint if that's all you have.

@artiejohnson703 4 жыл бұрын

I am new subscriber. I am new to resin. I use resin with a UV light. Can I use UV resin in silicone molds in detailed molds?

@Tiffany.Solorio 4 жыл бұрын

Hello Artie. I want to say yes but I am not 100% sure. Have you tried googling it? Sorry I can't be more help. Thanks for watching.

@freddiep82 4 жыл бұрын

You would probably laugh if you seen my resin collection! I ha e a whole tall dresser filled with them! I love pouring and demoulding resin!

@JamesDoylesGarage 2 ай бұрын

You should add the "extreme mixxing of resin " to your other video in text. You had said "Resin doesn't work" You will have more people respect your channel, if you correct that. We all live and learn :) Subscribed. 🙂

@Tiffany.Solorio 2 ай бұрын

Which video?

@almareyes2192 3 жыл бұрын

Okay I got some questions, I seen you said you are new to this so am I! I was wondering though can this have glitter and other jewels or dried flowers incorporated? Also if left for longer to cure does it get harder and less foldy(yes I think I just made that word)? Do you know if there is one similar that would look like glass? I would appreciate your answer!♥️ actually two more question can I add pictures? And am I able to do one mold and add it to another bigger mold?

@Tiffany.Solorio 3 жыл бұрын

Hi Alma! Sorry for the late reply! Yes you can add all sorts of things to the resin. Lots of people create beautiful trays with dried flowers and glitter.

@almareyes2192 3 жыл бұрын

@@Tiffany.Solorio no worries thank you so much!((:

@tyarawalker2104 9 ай бұрын

I’m confused at what you were doing in the beginning, how come you poured the resin in multiple cups and then decided to combine them all into one? Is that necessary? I am only asking because I want to try out a project using resin

@Tiffany.Solorio 9 ай бұрын

Resin comes in 2 parts. The resin and the hardener. I poured them into separate cups to measure exactly the right amount for each. I hope that helps. 😊

@lac8356 Жыл бұрын

can these resin molds be painted with acrylics?

@Tiffany.Solorio Жыл бұрын

Yes.

@suecrease6795 3 жыл бұрын

How do you colour them or are they always used clear. Thanks x

@Tiffany.Solorio 3 жыл бұрын

I always paint them after to go with what ever project I am creating. I usually use acrylic paint or gesso. I hope this help.

@kariann226 3 жыл бұрын

How do u paint it after its cured?

@LittleCraftyKitty 3 жыл бұрын

Hi i bought some tiny gummie bear molds (like nail charm size) and was wondering how to fill something that tiny? Their little feet are the hardest to fill

@Tiffany.Solorio 3 жыл бұрын

They sound so cute. I would use a popsicle stick or even a tooth pick to carefully add the resin. I hope this helps.

@LittleCraftyKitty 3 жыл бұрын

@@Tiffany.Solorio Aww thanks girl, I'll definitely try that out & post a update when i get them done :) I'm making them "doll size" as I'm a adult collector, I find making mini anything is fun lol... Just very new to epoxy and tiny molds 😂💖 appreciate your videos. Subbed today :)

@Tiffany.Solorio 3 жыл бұрын

That is awesome!! Yes please update! My daughter who is almost 10 loves making her barbies stuff. Have you heard of my froggy stuff? My daughter is obsessed! She makes them coffee shops and movie theaters. It’s so fun to see how creative she is in a whole different way then I am! Thanks for subbing! I hope you enjoy more content!

@ginacable5376 Жыл бұрын

Can I use a hot air gun instead of butane torch?

@Tiffany.Solorio Жыл бұрын

Yes.

@BelindaBasson 4 жыл бұрын

Welcome to my addiction!

@Tiffany.Solorio 4 жыл бұрын

LOL! Belinda. It really is addicting. Thanks for watching!

@lilliegillespie4707 3 жыл бұрын

Where did you get your gloves?

@Tiffany.Solorio 3 жыл бұрын

I believe in the auto supply section at walmart. I hope that helps. Thanks for watching!

@apfau04bronco 2 жыл бұрын

Spray 91Percnt alcohol in a spray bottle, then wait a little bit, there faster up

@ScrapaLapaMagdalenaLawedziak 3 жыл бұрын

Hi Tiffany, I watched a video recorded by a girl, who got sick from resin by not using it in a well ventilated room and not using a mask. She has serious issues with her lungs. I have stopped using my resin after seeing this video. Maybe use this special mask next time when poring resign - just for your safety. Take care! :)

@Tiffany.Solorio 3 жыл бұрын

I saw that video too, Very sad! I don't use resin often but when I do I always have my window open. I also wear a mask that my husband has for when he does word working. It has 2 huge vent things. I also say in my video to wear a mask. I appreciate you and how you are looking out for me and others. I think I am going to put a disclaimer in the comments of this video for good measure. Thanks again.

@rajveerkaur5492 3 жыл бұрын

Can we use chocolate silicon mold for resin ?

@Tiffany.Solorio 3 жыл бұрын

Yes. I have a few molds that I got at Hobby Lobby that I have used with resin.

@rajveerkaur5492 3 жыл бұрын

@@Tiffany.Soloriowhat if they are thin ? Will they work, they will not show any chemical effect?

@sarahmeed5227 2 ай бұрын

my uv clay won't seem to work in silicone moulds. Just stays sticky

@Tiffany.Solorio 2 ай бұрын

I haven't tried UV resin in moulds. So I am not much help.

@MehakGulzar 3 жыл бұрын

I have questions is that, through epoxy resin can we make sculpture or 3D object ... Iam not talking about casting resin... I am asking about table top resin

@Tiffany.Solorio 3 жыл бұрын

Yes I believe you can use table top resin the same way.

@MehakGulzar 3 жыл бұрын

@@Tiffany.Solorio thank you

@lisablanchard8243 3 жыл бұрын

Can you do this in a plastic mold. I have the blessed mother and last supper molds I can not find them In silicone molds. I been trying different stuff to fill them with and I’m not having good luck any will be appreciated thanks.

@Tiffany.Solorio 3 жыл бұрын

I imagine yes. I have some plastic molds from Stamperia. I would try and mix just a tin bit together and put just a tad bit into the mold and let it cure for 24 hours to test it. Those molds sound amazing. The last supper is one of my favorites. I hope this helps.

@urbanchili 3 жыл бұрын

If you weigh it, you can pour both into the same cup

@Tiffany.Solorio 3 жыл бұрын

Thank you! I do plan to get a small scale for my craft room. I don't use resin that often but I know that it is important to get both parts equal. Thanks again!

@marchellerecendez1557 3 жыл бұрын

Is this fast setting resin? If not that should be specified.

@Tiffany.Solorio 3 жыл бұрын

It is not fast drying. I do say to let it dry for 24 hours. Fast drying resin is ready in like 10 minutes.

@Aloha_XERO Жыл бұрын

Question 🙋🏾‍♂️ to anyone with the answer: would a small vibration table help with getting those tight or negative spaces filled ?

@joyceburkhart6606 Жыл бұрын

I must have used the wrong resin, think mine is a 2 part, finishing resin. I made several new molds, hours ago, they are not setting up, not turning white? Says, 48 hours!😳Have I ruined my new molds?

@Tiffany.Solorio Жыл бұрын

No I don’t think they are ruined. This happened to me. I can’t remember what I used to get it all out. It may have been isopropyl alcohol maybe. It was a few years back. If it comes to me I will comment again.

@apfau04bronco 2 жыл бұрын

U/v resin spatulas, anything in

@gabrielaguevara1349 2 жыл бұрын

You an use super glaze from Home Depot I the paint department

@rahul1980ization 2 жыл бұрын

you use syringe.it's easier and neat. Thanks.

@Tiffany.Solorio 2 жыл бұрын

Thanks for the tip! I appreciate it!

@raggedy._.andy311 3 жыл бұрын

you sound like stevie from good mythical morning

@Tiffany.Solorio 3 жыл бұрын

I had to look up who that was. I don't think so. but thank you!

@Kaleb_Talks Ай бұрын

de-mould I thought it was

@Claudg2008 Жыл бұрын

Saying that you use "resin" is like saying that you use liquid. From what I see, what you use is EPOXY resin, and epoxy is the word to stress. There is also polyester resin, vinylester resin, and many more.

@heroesytumbas 11 ай бұрын

Even just saying epoxy isn't specific enough, if you use coating epoxy as casting epoxy you'll end up with a mess.