Utility Room Built on Wooden Frame- How to!

Рет қаралды 61,225

4 ай бұрын

i was doing this job twice it supposed to installed up tight to ceiling but customer change his mind and we understand that as i was actually design it in place so they did not have the chance to see a plan and i agree we were trying to finish it at the same high as kitchen, but fridge was going to be installed on a shelf too high for them and plinths was going to be 2 levels 100mm on side and 150 mm sink side.i end up starting again which was fine now i have to find a solution to attach plinths to the corner base doors so they can use all that space and to be able to reach to the pipe work for servicing
thanks watching !!

Пікірлер: 88

@charranjitsingh6742 4 ай бұрын

Love watching master carpenter at work it’s been a long time since I have seen new techniques used in kitchen installations, keep up the good work 🔥🔥

@CAVjoinery 4 ай бұрын

Wow, thanks! Glad you like it

@Shughessonsltd 4 ай бұрын

Great install and I do love your videos but as a heating engineer that gives me nightmares about servicing or replacing parts as it would have to be dismantled to gain any access. 👍🏻

@bellaartesemcroche6905 4 ай бұрын

Pensei o mesmo .

@CAVjoinery 4 ай бұрын

I understand for services it has access to that only if needs changing that has to come apart thanks

@nisim4858 4 ай бұрын

You are a professional and your videos really teach me tips at work. ❤️🇮🇱❤️

@CAVjoinery 4 ай бұрын

Happy to hear that! Thanks 🙏

@mchilly 4 ай бұрын

That climb cut on the panel is just brilliant! Score, climb cut the end, and then forward cut. I’ll definitely be doing that going forward.

@CAVjoinery 4 ай бұрын

Thanks be careful my saw has a kickback stop future,so just do it slowly when cutting that way thanks

@mchilly 4 ай бұрын

@@CAVjoinery that’s some good advice. Thanks!

@darrenboston342 2 ай бұрын

Fantastic work buddy👍

@CAVjoinery 2 ай бұрын

Thanks for the visit

@petesastrophotography 4 ай бұрын

It's always a joy to watch a master at work👍It's great watching how you tackle various problems and the solutions you come up with. I'm planning on building my own kitchen, your videos have been an invaluable reference on how to do it properly.

@CAVjoinery 4 ай бұрын

Glad you enjoyed and happy to help thanks 🙏

@denty32 4 ай бұрын

Picked up some nice little tips there my friend

@CAVjoinery 4 ай бұрын

Glad to hear it thanks for watching

@rudolphsiekiera7579 4 ай бұрын

Whouaaw !! what a level, respect the artist

@CAVjoinery 4 ай бұрын

Thanks a lot !

@nonovdv8447 2 ай бұрын

Très joli travail tu est passionné 👍🏼👍🏼👍🏼

@CAVjoinery 2 ай бұрын

Thanks so much for watching and sharing

@tadeogonzalez3124 4 ай бұрын

Hola sos un crack. Gracias por subir estos videos , aprendo un monton . Saludos desde uruguay de un colega

@CAVjoinery 4 ай бұрын

Thanks for watching and glad to hear that

@IranVillagLena 4 ай бұрын

Very good 💯 nice work 👏

@CAVjoinery 4 ай бұрын

Thanks ✌️

@franciscoducival9601 4 ай бұрын

🇧🇷 Boa noite professor! Belo trabalho profissional. Abraços.

@CAVjoinery 4 ай бұрын

Thanks a lot for the support

@mehdiboudoudou6416 4 ай бұрын

Nice job

@CAVjoinery 4 ай бұрын

Thank you! Cheers!

@saintsi6997 4 ай бұрын

How do you perform maintenance on the boiler. With all the wood in the way. I'm pretty sure that against code.

@CAVjoinery 4 ай бұрын

Has a lot room and acces to all valves

@khassankhassan8076 4 ай бұрын

Да отличный работа 👍👍✊

@CAVjoinery 4 ай бұрын

Thanks

@GrahamG-rm4jx 3 ай бұрын

Superb 👍🏽

@CAVjoinery 3 ай бұрын

Thanks 🤗

@pwisc2115 4 ай бұрын

Great final clean and organized looking. For the folks who don’t live in Europe or maybe just in the UK. The plumbing being exposed/ not hiding behind walls is something commonly seen in houses? I am not 100% sure whether here in the USA is a law or not but I have been everywhere and in all sorts of houses and even in the most modest and simplest house you don't see an exposed line of any kind. So, I would like to learn the motive for that. Thanks

@CAVjoinery 4 ай бұрын

Thanks indeed in the uk water pipes and electricity wire are exposed when comes on kitchens or sorts like this i think it has to do with the cost and more simple if you change your lay out of the furnitures

@pwisc2115 4 ай бұрын

@@CAVjoinery I see. Thanks for sharing your experience and cool projects.

@user-co7zq6so8m 4 ай бұрын

very good！ tjm japan too！

@CAVjoinery 4 ай бұрын

Thanks a lot !

@nabilbaour8976 2 ай бұрын

professional work, how do you make perfect, chip-free cuts on melamine, what is the secret in the feestool circular saw?

@CAVjoinery 2 ай бұрын

Keep the dust bag empty and try to have a sacrifice board underneath thx

@maartengeerinck7756 4 ай бұрын

Nice install! Your videos have really helped me. What’s the blue tool you use to fit the nut things into the wall?

@jimmeh213 4 ай бұрын

Hollow wall anchor tool

@CAVjoinery 4 ай бұрын

Thanks is sribe tool here is an amazon link amzn.to/46jQe1C

@julioortega553 4 ай бұрын

I am wondering of you have a link from where you are buying the legs you are using for all the modules you built?? I would appreciate it.

@CAVjoinery 4 ай бұрын

No i dont they are delivered by home design

@seyedmostafarahgoshay 4 ай бұрын

Good🎉

@CAVjoinery 4 ай бұрын

🙌 thanks a lot

@user-kb2ho7ht7q 28 күн бұрын

Молодец!

@CAVjoinery 28 күн бұрын

Thanks 🙏

@user-kb2ho7ht7q 28 күн бұрын

@@CAVjoinery спасибо

@harlampios5883 4 ай бұрын

Ну и залипуха 😮

@CAVjoinery 4 ай бұрын

Thanks

@ivanasic2959 4 ай бұрын

C A V joinery what nivel laser you use?

@CAVjoinery 4 ай бұрын

Here is a link to amazon amzn.to/3t0okth

@diyorgafforov1691 4 ай бұрын

Гап нес молодец номат чис

@CAVjoinery 4 ай бұрын

Thanks 🙏

@ozwin2 4 ай бұрын

Are you sponsered by festool or something, even has the drills!

@CAVjoinery 4 ай бұрын

No but you can tag me in their channel so they can sponsor me or at least send me some bits thanks

@user-oy5yt6fd2v Ай бұрын

hi i like to ask you , what kind of tool maker do you use? i want to buy same thing

@CAVjoinery Ай бұрын

Hey they are called festool

@user-oy5yt6fd2v Ай бұрын

@@CAVjoinery thank you!!

@engineerMike2999 4 ай бұрын

What is the name of the veneered panel manufacturer that you used?

@CAVjoinery 4 ай бұрын

Sage green is the colour

@FenTiger69 4 ай бұрын

@@CAVjoineryhe asked the manufacturer, rather than the colour… I’d love to know that too please?

@user-co7zq6so8m 4 ай бұрын

tjm japan

@naderabdullah8247 4 ай бұрын

معليم ❤❤❤

@CAVjoinery 4 ай бұрын

Thanks a lot !

@Fekillix 4 ай бұрын

If any one else is wondering there is indeed a smoke detector with low battery featured in this video ;)

@CAVjoinery 4 ай бұрын

They need to be checking by an qualified electrician

@danielekberg3329 4 ай бұрын

What laser do you use?

@michau56 4 ай бұрын

Hilda Afforable price and quality very good

@danielekberg3329 4 ай бұрын

Ok, I'll check it out. Does it have a narrow line?

@CAVjoinery 4 ай бұрын

Lasgoo Here is an amazon link amzn.to/3t0okth

@le.Calmosien 4 ай бұрын

Il va être impossible de changer le chauffe eau ou autres appareils sans demonter, une demande du client sans doute

@CAVjoinery 4 ай бұрын

It is ok for service but if needs change had to come apart

@user-kb2ho7ht7q 28 күн бұрын

Подскажите пожалуйста Нм какую сумму у Вас инструментов ? Все полностью

@CAVjoinery 28 күн бұрын

Hey there the tools i used are named festool

@user-kb2ho7ht7q 28 күн бұрын

@@CAVjoinery сколько денег вложил в инструмент

@adrianuhl7535 3 ай бұрын

Result?

@CAVjoinery 3 ай бұрын

I have got not time to edit but i will

@user-kb2ho7ht7q 28 күн бұрын

Вот это да

@CAVjoinery 28 күн бұрын

Thx a lot !

@user-kb2ho7ht7q 28 күн бұрын

@@CAVjoinery вообще не понимаю что написано

@pavelf2991 4 ай бұрын

Не удобно будет обслуживать оборудование

@CAVjoinery 4 ай бұрын

It is fine for servicing

@user-hf1wg3tn8v 4 ай бұрын

@CAVjoinery 4 ай бұрын

Thanks