Vacuum cleaner motor commutator cleaning

Рет қаралды 66,883

Lindsay Wilson

8 жыл бұрын

For more info and photos, see imajeenyus.com/workshop/201605...
Lathe shear tool: www.gadgetbuilder.com/Vertical...

Пікірлер: 29

@vacuumtests9225 6 жыл бұрын

Genius! I have exactly the same type of motor. It's 2100 watts (this may vary). I have to look at this video if it starts to do the same thing.

@playstation2bigs 4 жыл бұрын

After cleaning still smells bad ?

@user-xs4rz1yx4w Жыл бұрын

Hello sir Thanks for your great channel I own a LG vacum cleaner and it seems that the south korean motors are seal press and there is no nut at the end of the shaft instead of that there is a metal piece My vacum cleaner has a bearing problem Since the price of a new motor is high in my area i have a high hopes to repair this motor I dont know if its needs lathing or no Thanks sir i really count on your help

@OQureshii 4 жыл бұрын

Is it supposed to spark at all. Mine is sparking a lot. How did you remove the top cap.

@imajeenyus42 4 жыл бұрын

All brushed motors will spark to an extent. If it's sparking a lot, the brushes and/or commutator probably need cleaned. As for the top cap, it was just held on by friction - tapping the edge with a block of wood helped to release it.

@titi9238 3 жыл бұрын

I just took mine apart, cleaned out the dust as it was being used without filter bag. Should there be any spark at all? And it still has the burning smell.

@imajeenyus42 3 жыл бұрын

There will always be done sparking, it's just the nature of brushed motors. Perhaps dust has got embedded into the windings and is causing the smell.

@JimTaylor42 5 жыл бұрын

That's a lot of useful and interesting information but I wish you had shown how to strip down the motor.

@aserta 8 жыл бұрын

The stink might not be from the motor, rather from the bag. I'm not sure what you have on it but if the bag + dust sits around it develops a smell.

@imajeenyus42 8 жыл бұрын

It's a bagless cleaner (cyclone separator), and I'd already given all the various filters a good wash, to no avail ;-( The smell was definitely from the motor - when I originally ran it outside the hoover, it made one hell of a stink!

@nenobug 3 жыл бұрын

Thanks to run your motor

@azizrehman1084 7 жыл бұрын

what is the speed (RPM) of the motor ?

@imajeenyus42 7 жыл бұрын

Not sure, these things are usually pretty fast, something like 10000-20000rpm.

@azizrehman1084 7 жыл бұрын

Thanks !

@mohammadihw 4 жыл бұрын

Cap on the motor is not fitted tightly....what should i do..?. Thank you

@imajeenyus42 4 жыл бұрын

Tape or silicone sealant probably the easiest.

@mohammadihw 4 жыл бұрын

@@imajeenyus42 i have super glue. Is it suitable for that..? Thank you

@imajeenyus42 4 жыл бұрын

@@mohammadihw Well, if you never want to be able to take it apart again, sure. Why not just use some silicone sealant?

@mohammadihw 4 жыл бұрын

@@imajeenyus42 I don't have silicone sealent yet because Due to coronavirus epidemic in my Country....whole country is gone under lockdown for 21 days. So i am unable to purchase. Thank you