Vanquish VS4-10 Phoenix Portal Build Series - Part 7

Vanquish VS4-10 Phoenix Portal Build Series - Part 7 - Body Wheels and Tires

Рет қаралды 6,756

2 жыл бұрын

In this part of the Vanquish VS4-10 Phoenix Portal build series, we go over putting together the body, wheels & tires as well as the completion of this VS4-10 Phoenix build!
Seen in Video:
Armory RC Katana 500oz Servo - www.armoryrchobbies.com/produ...
Kit:
Vanquish Products VS4-10 Phoenix (Portal) - bit.ly/3juvJsK (Amain) | ebay.us/k5ZcWY (eBay)
Parts:
ProTek RC Low Profile Servo Horn - ebay.us/Q8pi96 | bit.ly/38JVVsS (Amain)
Electronics:
Armory RC Katana 500oz Servo - www.armoryrchobbies.com/produ...
Hobbywing Axe 540R2 2800kv Combo - bit.ly/3iPDh7s (Amain) | ebay.us/Cgp7O5 (eBay)
Tools:
Versachem Brake Caliper Grease - ebay.to/3p8bIZ7
Noleen SF3 Grease (available on eBay) - ebay.to/3jN9vB9
Permatex Anti Seize Lubricant (ebay) - ebay.to/3qpTbsN
Associated 1656 FT 1/4 in Driver Handle - ebay.to/3d31t5O | bit.ly/3gJVi56 (Amain)
Tamiya Side Cutter - ebay.to/371SAWb | bit.ly/3gHggSm (Amain)
DEWALT DCF610S2R 12V MAX Cordless Lithium-Ion 1/4 in. Hex Chuck Screwdriver Kit - ebay.to/3tQqXcr
MIP Metric Speed Tip Set MIP9512 - ebay.to/3qdBMTU | bit.ly/2Ch0wGB (Amain)
Bob Smith Industries Blue Thread Locker - ebay.to/3jDR8i9 | bit.ly/3283GHR (Amain)
ProTek RC Shock Pliers (available on eBay) - ebay.to/372Lscs | bit.ly/3iPs1Ie (Amain)
Duratrax Shock stand - ebay.to/2MOyJ6l | bit.ly/2W9Ihdq (Amain)
Hakko FX-888D Soldering Station - ebay.to/3aXFmLj
Multistar Rubber R/C Work mat - bit.ly/2T3F4Zo
IWISS Crimping Tool - ebay.to/3jGKZll
Universal Servo Cable Wire Connector Crimp Pin Kit - ebay.to/3tSAAaW
E6000 Adhesive - ebay.to/2MZwtZV
=================================================
Subscribe: kzfaq.info...
*Notice: Some of our articles, videos and descriptions may contain affiliate links, which means that if you click on one of the product links, RevolutionX may receive a small commission. This helps support the website and social media channels and allows RevolutionX to continue to produce content. Thank you for the support!
=================================================

Пікірлер: 40

@jeffreypursley1914 Жыл бұрын

Your build series is an invaluable resource and should be watched by all who are building the Phoenix kit. Thank you for all the hard work you put into this series, it is greatly appreciated.

@RevolutionX Жыл бұрын

Much appreciated! Glad they're helpful! 🤙

@philipmorgan5050 Жыл бұрын

Thank you for the series, very nice

@RevolutionX Жыл бұрын

Thanks for watching!✌️

@79Blazer 2 жыл бұрын

Thank you for your video, I could not figure out how to mount the wheels until I watched this a second time.

@RevolutionX 2 жыл бұрын

Glad I could help!

@RCVHX22 2 жыл бұрын

Well done my friend and a nice Phoenix, have fun and have a good week 👊😉👍

@RevolutionX 2 жыл бұрын

Thanks 👍 You have a great holiday weekend!

@RCVHX22 2 жыл бұрын

@@RevolutionX have a great holiday weekend to my friend 👊😜

@SlavaRC 2 жыл бұрын

Excellent work my friend!)🤩💥💯👍👏

@RevolutionX 2 жыл бұрын

Thank you 👍

@MrSneakyGunz 2 жыл бұрын

Perfect! Watched the whole series. 👍

@RevolutionX 2 жыл бұрын

Awesome. Hope it was helpful! 🤙

@bigjeep_littlejeep3777 Жыл бұрын

I use the same driver and bits 👍

@RevolutionX Жыл бұрын

Awesome! I love using the Tamiya driver with those ebay Pro-Line interior knock-offs too!

@STP_RIDGELINE 2 жыл бұрын

Freakin awesome mi big bro I can hardly wait to get my Phoenix! I still have my VS410 Ultra in a box brand new lol 😆

@RevolutionX 2 жыл бұрын

It's got one run, and overall it was pretty fun! Definitely some things to change though to help it along. I'll probably keep this rig as a higher performing trail rig due to the nice body and how heavy that setup is along with the inner fenders.

@djr01974 2 жыл бұрын

Awesome can’t wait to see it on the trails. Your gonna have to let me know how you like the tires.

@RevolutionX 2 жыл бұрын

Yeah, we'll see how the tires do! I'm going to try to drive it after I drive the CFX-WS DC1.

@andymay2127 Жыл бұрын

Looks awesome! I've been looking for something like this color, just ordered the Proline Slate Blue, on their website it looks a lot darker than in your video, thanks for sharing.

@RevolutionX Жыл бұрын

🤙

@camyota Жыл бұрын

I wish it was available without the wheels and tires.

@RevolutionX Жыл бұрын

Yeah, the wheels and tires are not my cup of tea. I did one run with them, and decided they were not for me. The first batch tires were very meh. I don't know if the later ones were any better though.

@camyota Жыл бұрын

If I get one I'll probably put some chanquish wheels with mtrs or tsls on them. Or maybe some ssd steelies.

@RevolutionX Жыл бұрын

@@camyota I love my chanquish and SSD steelies. No tears shed from scraping them on the rocks LOL!

@TinyTiresRC 2 жыл бұрын

Once again you chose a colour I wanted for mine. Unfortunately I could not obtain the Slate Blue in time. It looks as good as I was hoping! I am curious as to your thoughts on the stock tires. I added some CI Lil Novas and ditched the stock foams. tires are pretty sticky feeling..

@RevolutionX 2 жыл бұрын

I haven't had the chance to try the stock tires and foams yet. I've already decided that I'm going to swap them out for some Pro-line G8 Swampers, KM3 or Krawlers in 4.75 size though regardless. The tires I feel are too narrow of a look for this rig. Might look good on a different scale rig though.

@TinyTiresRC 2 жыл бұрын

@@RevolutionX I've been thinking about the KM3s myself. I do, however, like the stock wheels. Kind of Surprised at that. Usually I don't go for plastic wheels. lol

@cl-audio322 2 жыл бұрын

Nice job, I cant get the dig and OD servos to engage properly so when I accelerate or reverse my drivetrain does not spin. When i removed the transmission, I have to spin the driveshafts back and forth while pulling the OD and Dig shift lever to get them to snap into place all the way. Still trying to figure out what's going on, sigh. Not to mention trying to figure out how to set the EPA for those two servos with my flysky gt5 correctly.

@RevolutionX 2 жыл бұрын

It sounds like your EPA's are a bit off. I am also using a FlySky GT5. I have the Overdrive servo set to Ch3 (the button on the handle), and the dig servo set to the 3-position switch which I think is CH4. Maybe I'll make a video with my settings in the future. Just keep working at setting the EPA's correctly if you can. Also make sure you used the correct parts in the transmission for the dig, and OD areas. There were a few areas where the instructions weren't clear. Also a few parts where the parts are metal, but also have a plastic part that looks similar.

@cl-audio322 2 жыл бұрын

@@RevolutionX Thanks for the advice. Yeah I'm going to take the OD and dig apart and do over. I'll try to find some other videos that might add a different angle or step i might be missing in yours. Wish me luck. Lol.

@joweemac Жыл бұрын

How do you mount the spare tire?

@RevolutionX Жыл бұрын

I don't remember off the top of my head, because I didn't do it, but I believe there is a piece in the kit that you mount onto the cage that will allow you to mount a spare tire.