Join this channel to get access to perks: / @vasylgladun #tryityourself #doityourself Bar's Leaks 1109 Block Seal Liquid Copper Intake and Radiator Stop Leak - 18 oz. amzn.to/3JqFtBi
Пікірлер: 22
@blackrepublic99758 ай бұрын
Bars radiator stop leak definitely works. It worked on my car today. After adding bars, trying to get the car home had to keep shuting off the engine to prevent overheating, By the fourth time 😂 the leaked stopped and the temp gauge stayed in the normal position couldnt believe my eyes. Yes it works, well worth the $8+tax
@EmefGriffin5 ай бұрын
Was the car cold or just cold enough to remove the cap?
@FrankieAllen-hg4wv6 ай бұрын
Do you have to drain the coolant out first
@MohitSharma-zk1if4 ай бұрын
Does it seal head gasket also ????
@bbc_junior486310 ай бұрын
I thought you were not supposed to install it through the coolant reservoir? It said to install through the radiator.
@VasylGladun10 ай бұрын
You are correct but if you are the owner of the Ford Transit you know that you don't have cap on the radiator itself so there's no other way to add the mixture other than coolant reservoir. It still went through the system so it doesn't change anything.
@MicroRotors9 ай бұрын
@@VasylGladun Remove the top radiator hose and pour it in there because the overflow does not circulate like the rest of the system does.
@VasylGladun9 ай бұрын
I'll keep that in mind for next time. Thank you.
@M9l7115 ай бұрын
Does it work on a motorcycle?
@curiosity2314 Жыл бұрын
Some leaks are to large to repair with this solution. Would have been interesting to see a closeup shot of the issue with the radiator.
@VasylGladun Жыл бұрын
kzfaq.info/get/bejne/gpani5Z5xMfOgqc.html Here's the video with a close-up shut.
@DrtyDoe7 ай бұрын
So you put water first or you put that then top it off with water ? 🤔
@VasylGladun7 ай бұрын
You put the mixture first and then add necessary antifreeze to the level, do not add water
@abrahamsecoe877 ай бұрын
I need to understand please, so you pour it right into the coolant reservoir is that right? If so, please how is the extra removed from the system? New subscribers here and thank you for the video
@VasylGladun7 ай бұрын
You don't have to take anything extra out of the system. Extra stuff supposedly spreads evenly through the whole coolant system without plugging anything unnecessary.
@VasylGladun7 ай бұрын
And technically you have to pour it straight into radiator. In my case I don't have radiator cap so I improvised. Some guys saying I should've removed the hose and pour it into the radiator that way, but I don't see how that would make the difference since the hose location was still below the leaking spot.
@abrahamsecoe877 ай бұрын
@@VasylGladun Thank you sir!!
@zpoppe6 ай бұрын
It's got to be put directly into to radiator hose ,not the resivore tank
@cubmancan9 ай бұрын
What happened with your vehicle? Just wondering. I am searching for a solution for very minor (at this point) a water pump seal leak. On my vehicle, the pump runs off the timing belt, which is a very expensive repair.
@VasylGladun9 ай бұрын
I end up replacing my radiator so it's a little bit different issue than you have. You might want to dig a little more what could work better for your situation, copper based filler or aluminum based filler.
@bristoltr Жыл бұрын
Pack of siggarets and agg on top would work better
@VasylGladun Жыл бұрын
I've heard about cigarettes, but egg? I've wonder about cleaning the system after 🤔