Ladder Frame Assembly by German Couple (FUNNY !!!) / S4-Ep27

No video

Ladder Frame Assembly by German Couple (FUNNY !!!) / S4-Ep27

Рет қаралды 102,182

Күн бұрын

Finally, we can start the assembly of our 2006 Land Rover Discovery 3. We got the frame reconditioned and all small parts fixed and painted and now we show how to put everything back together.
We are not liable for any harm you do to your car, your engine, your surroundings or yourself. Use the information given in this video at your own risk.
Thanks for watching,
Vera & Christian
Become a patreon
/ lrtime
As requested by multiple viewers:
These links are not affiliated. We have no connection in any kind to the sellers or manufacturers and we also do not have any interest in affiliations.
Link to the special cable tyrap clips for the LR3/LR4 frame holes
www.reichelt.d...
Electrical tape, 15 mm x 10 Meters black
Tesa 56192-00010
Tape made for under bonnet wiring harness, heat resistant, 19 mm x 25 Meters
Tesa 51026
Tape for wiring harness, PET-Vlies, cotton
Tesa 51608

Пікірлер: 420

@leejordanful Жыл бұрын

If there was an award for the best Discovery 3 Complete Rebuild series of videos then you would win it by a mile! The love that has gone into this car is amazing.

@MarengoScotland Жыл бұрын

No better video on a Sunday morning than with LR Time! Keep up the good work! 😎🏁

@dipladonic Жыл бұрын

100%

@pwatom22 Жыл бұрын

Except it does remind you of all the jobs you have been meaning to do and still haven't done 😔

@stephenbeattie-sy1ds Жыл бұрын

Christian that is an incredible video. Enormous workload and commitment. Thank you both for your entertaining episode.

@dn0682 Жыл бұрын

If only more people be like yourselves everything will be perfect but I think not many can come even close to the attention and care you carrie on this rebuild. Well done guys.

@billhanson4921 Жыл бұрын

yep he really the picture of attention to detail. Gotta say i suffer from the that'll do syndrome, he'd probably lynch me if i ever worked with him 😆

@fubar12345 Жыл бұрын

The ideal mechanic. I wish I could find someone like him to work on my LR! Although I do appreciate the time constraints faced by most mechanics due to workload required to run a business.

@tyronemessiah4479 Жыл бұрын

That was pure therapy. But I now have ‘ladder frame envy’ 😂 amazing job guys. Ty

@robpeabo509 Жыл бұрын

Lots of tips for anyone who chooses to undertake a body off frame project, especially in the areas that trap water and debris.

@RangieNZ Жыл бұрын

Amazing. I bet there are people who used to build these in the factory, now watching and thinking that this is how we should have done it. :)

@TheDaf95xf Жыл бұрын

Good afternoon Vera & Christian 😊 The transformation on the ladder frame is awesome 👏🏻 I’m in amazement on how methodical Christian is with it comes to modifying things making it better than factory 👍🏻 This is most enjoyable to watch 😊 As always big kisses for Vera for her patience and love of here precious LR 😂 xx

@josephsteed8015 Жыл бұрын

Doesn’t matter how crap my weeks been, I find myself laughing at you guys! Natural born entertainers with such an abundance of technical skills! I can now smile as the new week begins. Thank you Vera and Christian!,,,❤❤❤❤❤❤

@Vera_and_Christian Жыл бұрын

😅😊🙋‍♀️

@RichieRouge206 Жыл бұрын

Top marks to Vera for identifying the parts! It was so cool. It was very satisfying seeing the components being cleaned, sanded and painted so throughly! It is better than when it ran off the production line! A great video and thanks for the never ending cheer and humour! You are my favourite couple on KZfaq!

@georgeharrison2795 Жыл бұрын

An amazing amount of work, and to such an amazingly high standard quality. The pair of you are to be admired for your work ethic and attention to detail

@martiniv8924 Жыл бұрын

The only ‘Reality TV’ show worth watching 👌🏻😎 Christian & Vera (not forgetting Robin , guest appearances and last but not least the LR’s ) 🙌🏻✌🏻😎

@RichardFrost800 Жыл бұрын

Awesome setup and working area and workshop. That disco will be one of the last in existence in years to come in our hemisphere

@RichardFrost800 Жыл бұрын

I would love to have mates like Christian and Vera

@islandhopperstuart Жыл бұрын

Fabulous attention to detail: true engineering!

@julesviolin 4 ай бұрын

Fantastic restoration there. I would be scared stiff to drive it after all that great work . PERFECTION 😊

@pablomax9376 Жыл бұрын

I am not a LR guy, but I enjoy your videos. Your humor and obvious excitement for the project is fun to see.

@nickb5391 Жыл бұрын

I like the re-assembling of a vehicle as it gives you the satisfaction of achivement seeing it all go back together

@philhyde2635 Жыл бұрын

A second viewing on Monday morning, just in case I missed something. LR Time setting the benchmark for Discovery 3 refurbishment.

@gordonbarclay6106 Жыл бұрын

What Sundays were made for. Superb as usual..

@danielcookeb90 Жыл бұрын

wonderful! Happy Sunday everybody!!

@chrism5433 6 ай бұрын

Good to see your staying in shape .

@bigdavesdiscovery3world414 Жыл бұрын

I got back yesterday evening after a 3.642 kilometre trip through central France and Aragon in Spain, Now have 214.460 km on the speedometer and how beautifully the vehicle is running. It's also got to do something with this channel that gives you inspiration to get the job done properly and by yourself thank you to both of you for that! But I really think Christian you need a press for home too! I know my chassis pretty well too after having redone the underbody for MOT last January and now I know what the purpose of those two weights are. Next week I put it up on my heavy duty ramps on the street for the 5W-40 oil change and air filter before we set off for our trip through the south of England via Dieppe-Newhaven, see you about guys...😘

@bobby3378 Жыл бұрын

How amazing does that chassis look. So delighted to see the LR3 being assembled again. Cant wait to see it on the road again. Love the vids. Keep them coming.

@mikeboone4425 Жыл бұрын

Another sunday morning with LR all is good in the world today. Happy Trails

@sanatandharma4435 Жыл бұрын

Absolutely incredible video Christian! Also, what a well thought out vehicle, hats off to Landrover and superbly done by yourselves! Thank you for taking the time to share this.

@MrMit50101 Жыл бұрын

Sarah n tuned reference was just too on point😂😂😂😂😂

@MrMit50101 Жыл бұрын

Her channel is the personification of you can't make everyone happy she cleans they complain she doesn't they complain she replaces they complain she doesn't they complain she explains why she takes a "short cut" people still call her out its actually the same on this channel now that I think about it 🤣🤣🤣🤣🤣😅 it makes things even more entertaining knowing how many people are being triggered

@johntheoldmod Жыл бұрын

It's looking great Christian, I thought I was a bit OTT about cars but you take it to whole new level, when it comes to water traps Mercedes have perfected it with the W211, they design them in and then add seam sealer to ensure it can't escape and every spot weld is a rust spot. cut away the seam sealer and watch the water run out. I'm begining to see the Discovery in a different light.

@themoshpitt Жыл бұрын

No stone left unturned. Thorough and methodical. Great viewing on a sunday morning. Fabulous and intuitive as normal. Thanks Christian and Vera. OMG better than new.. 😂

@richardharker2775 Жыл бұрын

Phew! Good to know where everything goes. Lucky for Christian that Very is the perfect assistant.

@johnanderson2432 Жыл бұрын

Always satisfying when the reassembly process begins.

@oscarastua Жыл бұрын

Is for sure.. much better than new... Great great Job!!!!

@davyarthurs Жыл бұрын

Wow! That press made light work of all those new bushes!

@coreyking5135 Жыл бұрын

You and I are exactly alike, can't sit still and always trying to make things perfect.

@olamabambi4193 Жыл бұрын

The rebirth of the Land Rover and what a cute baby it is. A work of love for his true love Vera. 👏👏 🌹💐

@kumbirayinyabereka5190 Жыл бұрын

Another excellent video Christian and Vera.. So educational and therapeutic. LR Time is now my best "on screen time" on Sundays. I can't wait for the next episode. See you next Sunday. 👏🙏

@Goonit83 Жыл бұрын

Just discovered this channel, after I suddenly developed a case of discovery obsession.. missed a local sale but I’m keen to join the club! That frame looks amazing though, well done, you do great work - I’m enjoying watching your antics.

@Missed_Apex_GT Жыл бұрын

I love this channel…I don’t even really know why I do…I just do ❤️❤️❤️❤️

@Robert_hill Жыл бұрын

Love the detail you're showing. Many of us D3/4 owners will need to do this eventually. Thanks!

@bobrose7900 Жыл бұрын

Absolutely brilliant and such addictive viewing, OMG! And such a good job... whilst everyone has there small preferences when working on a project like this, you've completely nailed it. Not literally of course! Wonderful Sunday afternoon viewing and the best KZfaq channel by far. Well done Christian and Vera.

@MN-xn4lx Жыл бұрын

The most beautiful declaration of love that a man can make to his wife in German style😊

@deonbrunette9767 Жыл бұрын

I am a Toyota guy in Aussie, you have me convinced these discoveries are great if you work with them and are mechanical minded with basic mechatronic knowledge, thanks guys.

@Vera_and_Christian Жыл бұрын

😅👍💪🙋‍♀️

@d1sc0f1sh5 Жыл бұрын

What a great video! I envy Vella to have such a talented mechanic at home! My wife gets mad at me just for shaving rusted brake caliper at garage, because she hates rust all over the place^^;

@cloudninephoto Жыл бұрын

This has to be the world’s first concourse LR3😅. Well done.

@jezpayne3245 Жыл бұрын

Many years in the future when this is the last Discovery 3 in existence, someone will ask why haven’t the others lasted when LR clearly built them so well!! Not knowing the hours and hours that you two put into it. I love your channel, the enthusiasm and dedication you put into things. Plus, your humour is priceless! 😂 I’m only ever so slightly envious that I do not have the time, tools or skills to do this to my D3. Best wishes to you both, keep up the amazing work.

@alexshapley8331 Жыл бұрын

👍 another excellent video - many thanks, already looking forward to next week's video (which I will watch in the next 5 minutes - binge watch catch-up!). I expect that it now looks far better than (the underneath of) a brand new vehicle.

@keiths-teeth Жыл бұрын

Yes, a very nice Frame 😊

@robinsontadeupaes9560 Жыл бұрын

Amazing work this couple is doing. This is the most loved and pampered disco 3 in the world. I watch your videos since i lived in Poland and had a disco 3 hse. Now I am in Brazil and own an S version od the disco3. This car is an endless pleasure to drive and maintain. God bless your work and your videos.

@evick80 Жыл бұрын

You guys are impressive! Thank you for the videos!

@miklawson211 Жыл бұрын

A fascinating and methodical rebuild. I've watched from the begining to the end and found myself leaning into the screen listening and watching every part. Yes, i enjoyed it that much.

@washibonsai5307 Жыл бұрын

Todays media warp the reality: it is all displayed in minutes but it is a product of weeks of hard work, not to mention years of practice and experience. My deepest sympathies for showing the world that an “experienced” 😉couple can work together and not against each other! Not without little humour stings here and there, which are the salt in the soup. Greetings from the frying pan

@richardhartley7094 Жыл бұрын

Top restoration work👍

@graemetaylor9412 Жыл бұрын

Amazing work, Christian - genius

@AndrewJohnClive Жыл бұрын

Let’s play “What’s this part with Veda”… You guys are just great.. Sending lots of love and thanks..🙏🏼🙏🏼🙏🏼❤️❤️❤️

@johnette6697 Жыл бұрын

Great video, a lovely entertaining couple too.

@dipladonic Жыл бұрын

...yet again, as a man, these videos leave me feeling inadequate. Lolzzz.

@lawnmowerjones3160 Жыл бұрын

Great work , very funny , better than what's on the TV!

@jaldeborgh Жыл бұрын

One of your best episodes to date and that is saying something. Well done!

@Trev350 Жыл бұрын

So, this week i had a special birthday. And I'm now officially an old man. But you're never too old to learn a new trick. And what i observed today was was simple but brilliant. When fitting cable ties, pull them tight, then grab them with the cable cutters, bite but don't cut, rock the head of the cutter from side to side.... Gets one or two extra clicks on the tie and it's now nice and tight. Why didn't i think of that!? Now everyone is laughing at me, because you all already do that? Every day's a school day!

@phill-w 11 ай бұрын

You guys are amazing, 😊

@mattnoyes7729 Жыл бұрын

How very satisfying...doing all the little jobs no factory would do because of cost but will give you an incredibly durable vehicle. Very nice!

@johanndork5364 Жыл бұрын

Painting chassis in anti rust primer and filling water traps with mastic surely wouldn’t cost much. Would save an awful lot of Toyotas.

@abdulaiabdurahmani2913 Жыл бұрын

Superb job.greetings from KOSOVES,Thank you Germany for support Kosoves.

@danielhuckerby8435 Жыл бұрын

A pleasure to watch

@bw6378 Жыл бұрын

Very nice! It is now so fancy that you will have to put it in a museum and get a Toyota to drive. lol

@mrmitch4599 Жыл бұрын

Excellent, funny, very methodical how lucky you two are to have that enthusiasm together!! Makes the job fun which is half the job, having a laugh as well as serious as it is!!👍👌 Nice one!!

@graemevass745 Жыл бұрын

Brilliant video Christian and Vera. A lot of work restoring your Discovery 3 , but well worth the effort, swearing and skinned knuckles . Your D3 will be worth more than it cost new when you've finished. Your car will now be priceless from a sentimental point of view.... ❤

@markrainford1219 Жыл бұрын

He jetwashed a wiring harness. This man knows no fear.

@Pesmog Жыл бұрын

I had a long slow intake of breath when I saw him doing that. 😲

@cp4512 Жыл бұрын

Great work! 👍

@johanndork5364 Жыл бұрын

Brilliant work. Great to see that the LR frame design is actually very good and strong with those main rail C sections welded together and I think they are braced internally too. Hats off to you for filling the water traps with mastic and with the agri rust primer should last for ever. If only Toyota painted Land Cruiser chassis like that in their factory.

@keithpvt Жыл бұрын

Such an amazing amount of detailed work. Fantastic. It's mid winter here on the Sunshine Coast in Queensland Australia. 21 and sunny.

@steveone9375 Жыл бұрын

Very nice job ,better than new for sure

@bizling Жыл бұрын

17:28 this is the content I appreciate, the little details that take away concerns, especially concerns that once are already evident, its too late.

@ccconlan2670 Жыл бұрын

ITS LR TIME😊😊😊😊 sunday mornings wouldn't be the same without lr time.Great work progress made this week.this disco will be like new.lucky vera😊 cant wait for next week's episode till then a big goodbye from dublin.ireland.

@madmax2506 Жыл бұрын

you folks are amazing ! 👍👍👍👍👍👍😊😊😊😊

@BenMitro Жыл бұрын

Once upon on time when cars were super expensive, it was worth doing all this work. Now days its done for passion and satisfaction.

@GarrickPayne Жыл бұрын

Ahh this brings back memories of summers in shorts and t-shirt getting twist knot wires embedded in arms and legs!

@barrieneill410 Жыл бұрын

Absolutely brilliant and inspiring. There is a lot of preparation, research etc that goes on behind the scenes that we never see. And then the video editing. Oh, and then the engineering and attention to detail. No idea how you fit it all in beside a day job.

@markfranklin4150 Жыл бұрын

Love watching these videos, you have a beautiful home. This car, when completed will be so much better than when it left the factory.

@jokerkk511 Жыл бұрын

Harmonic dampers, the best ride smoothness ever........

@dingleydell3250 Жыл бұрын

Vera is so enthusiastic about her LR3 it’s great to watch and can’t wait to it’s all together again and she can drive her car, please both explain how you have mapped where each part goes it must have been a long laborious task but utterly fascinating content, brilliant stuff please keep the videos coming Sunday wouldn’t be the same without them.

@mickbawn6815 Жыл бұрын

Great stuff as usual, noticed Christian mention " Sarah n tuned " she's very good too 😀

@BerlietGBC Жыл бұрын

More top work, roll on next Sunday

@johnperry7534 Жыл бұрын

I missed the part in my Landrover owners manual where it says in order to keep the car in working order you need to be an experienced and determined machinist , mechanic and blacksmith with a son who is a blacksmith as well, you must be as determined as a German or actually be German, have a hoist, a workshop , a full set of machinist tools, a lathe, a welder, and have a very pretty and helpful optimistic wife. I missed that part in the manual.

@charleshepplewhite7384 Жыл бұрын

Yes I get the point. I have no garage and a very sloping drive. But I carry out general maintenence like oils and improvements. Not looking forward to replacing the main belts but suppose I need to think about how to tackle that job and get all the necessary tools and bits before I start. Anyway great comment.

@rangie944 Жыл бұрын

If Only I had a press like that, If only I had a workshop like that, I still don't have the skills displayed here on this channel from Christian and Vera. Now If they could make me a Discovery from New parts I could be tempted to buy another. Great channel, very interesting video, thanks for posting.

@grahamwest1079 Жыл бұрын

Awesome work as usual coming together very nicely. Good fix on the water traps

@raymondsweeney8073 Жыл бұрын

What a fabulous & enjoyable episode, very interesting about the water traps on the frame 👏👏👏👏

@thomaslawry5238 Жыл бұрын

The TUV man (or woman) will not believe their eyes when they carry out their under body inspection on Vera's LR3. Amazing work, Christian & Vera !

@Vera_and_Christian Жыл бұрын

I really hope so. 😅👍🙋‍♀️

@charlesfournier3820 Жыл бұрын

Real nice and proper job😁👍

@finncarlbomholtsrensen1188 Жыл бұрын

During my Service I watched a Landrover hit a heavy telephone post from solid wood (It had been caught in a ditch, invisible below the cut grass and couldn't return to the road), and drive through! You couldn't see any damage, except where the end of the post hit the roof, when coming down again!

@larrysimon1 Жыл бұрын

Excellent Work ............. Enjoying this rebuild and Soooo Funnnyyyyy !

@TracyCorbett Жыл бұрын

So satisfying to watch! Superb work guys

@jfr55man Жыл бұрын

watching you guys makes me want to rebuild by car.... even though it runs just fine.

@TantersD3 Жыл бұрын

Awesome job! Lots to learn …. Especially those rain pockets😱 and extra tape on the wiring👍 I think this car will outlast us all now 😂

@jamest5149 Жыл бұрын

Great job and awesome dedication 👍 Highly recommend Bilt Hamber Dynax S50 and / or UC clear film waxes would be a good rust defence after the Disco’s back together. Spray in the chassis sections and generally all over. Bilt Hamber has a lot of experience in corrosion control and are relatively cheap… you can do the hole chassis and underside with one aerosol….. helps stop the fastener’s, bare metal and any scratches from building everything back together from corroding 👍

@josephp5058 Жыл бұрын

If in doubt give it a clout, the old Land Rover Mechanic motto, l did not know about those weights, something else lv learnt watching yous two. Again very entertaining guys, with all the trouble in the world, watching yous messing about with Land Rovers every week l feel part of the family now.

@iivaridark6850 Жыл бұрын

Good to see such a decent work done! Thanks!

@plasmaDave Жыл бұрын

Awesome work as ever. gotta say having lived in europe and experienced the rust problems, here in queensland i always find it such a pleasures to work on older vehicle's. My 2010 lr4 has no idea what rust is.

@Vera_and_Christian Жыл бұрын

😅👍So I am not sure if your area is affected by this. But here, we do not have the cracked dashboard problems. I did not even know something like this happens until we started with KZfaq and Australiens sent me their pictures. 🙋‍♀️

@plasmaDave Жыл бұрын

@@Vera_and_Christian fortunately it hasn't happened to mine. It does have some clear coat damage though just on the back door.

@bautiramada Жыл бұрын

Soooooo inspiring! Loving the energy and the detail-oriented work of course. What an amazing rebuild you’re both doing. Loving every step of the process! 🍻🍻😘😘