Just watched your video awesome build and looking building my own but might have to get fab campany to cut out plates for me as it would be a lot easier for where I am.

Award for chill, concise and informative. This is not the style of rack I'm wanting to build but I still watched every second & got some ideas. Thanks for sharing.

Sensational video. Well done. 👍

Could replace the riser top bolt with a pin and hinge that assembly so that you can open the boot on wagons. 🤙🏽

You sound just like Dr. Chase from House M. D. 😊👍🏼

love it. I love metric. Too bad I live in Canada, but our country is so small that all our commonly available steel is influenced by USA - and we get imperial dimensions

Awesome video! Any chance you would sell the files for the laser cutting of the brackets?

Thanks for the instructions mate, used it to plan out my rack build especially for spacing out the trays. Do you have a plasma cutter? I'm wondering how you cut the intricate shape in the gusseted pieces. For those following along at home and are new to metal work, i suggest you adjust the materials so as to maximise the common lengths available to you as most metal yards sell by the meter and charge per cut. best you get whole lengths and cut it yourself. 4 bike rack: 8m 10mm round bar (1500 per tray, 500 for support) 4m 50x50x3 SHS (1300mm top and bottom, 1050 vertical) 1m 50x3mm flat steel (135mm per wheel tray, off cuts used to cap off SHS) 250x250mmx5mm steel plate for the gussets If you wanted a 5 rack just add 200mm to the top and bottom shs and factor in an addition 2m of 10mm round bar I also bisected the bottom piece and welded directly to vertical bar to omit the extra angle iron and bolts and gain an extra 50mm. i suggest you offset the top piece either left or right depending on which way your wheel is turned. This project cost me around $200 in materials including paint and shock cord.

Does this design stress the front wheel? For sure wheels straight would be strongest, but handlebars would be in conflict with neighbour. For sure wheels turned 90 would be the least strong. Seems like there is a decreasing strength as handlebar length increases.

Subbed hoping for content of that AE90/91 back there, apart from the rack of course :D ...

Great video mate! How long you recon it took for you to make? Labour wise..

Anyone build something similar with thru axle mounts? Would there be too much stress on axle? Thanks

Hi Mate. Do those wheel Basket dimensions and height work OK with 29" wheels? Cheers

I built something similar but we have bikes with 29 inch wheels so I had to extend the length of the hoops to 700mm when mounted 150mm above the top bar. Width of my hoops vary between 114mm and 130mm. Of course I had already made the hoops at around 630mm then had to hack off the ends and weld in extension pieces.. Annoying..:)