Vetroo Lurker v240 AIO Review.
Рет қаралды 13,799
Күн бұрынIn this video I'll be looking at the Vetroo Lurker V240 All-in-One Liquid Cooler and comparing it too the Cooler Master MasterLiquid LC240E. I'll be Unboxing the Cooler, overviewing the specs and features, demonstrating installation procedures, covering thermals at idle and load, sound levels, and fan normalized testing.
Timecodes:
0:00 - Opener
0:21 - Intro
1:23 - Unboxing
4:37 - Intel Installation
7:15 - AMD Installation
9:06 - RGB/Fan Connection
10:00 - RGB Overview
11:20 - Max Overclock Stress Test
12:33 - Fan Static Pressure Loss
14:40 - Benchmark Results
17:06 - Sound Levels
17:39 - Conclusions
19:36 - Final Recommendation
20:28 - Closing
Components Used (Paid links)
Vetroo Lurker V240 - amzn.to/3swBDvB
Cooler Master LC240E - amzn.to/2NEK0Xj
Lian Li Galahad 240 AIO - bit.ly/2YoRMGA
InWin SR 24 AIO - amzn.to/3gxWEj4
Find me on Social Media
Twitter: @elevatedsystems1
Facebook: / elevatedsyst. .
Instagram: /
Contact Me: CJ@elevatedsystems.tech
Song: LiQWYD - Flow (Vlog No Copyright Music)
Music provided by Vlog No Copyright Music.
Video Link: • LiQWYD - Flow (Vlog No...
@sentranne 3 жыл бұрын
Thanks you for sharing your review! Love the color scheme and your hoodie!
@lisa_9845 2 жыл бұрын
Very nice video!! Helped me a lot
@andrewilner 3 жыл бұрын
Great review, as usual !!! Very detailed unboxing and assembly tips, which the provided instructions don't cover. The comparison tests are a solid evaluation tool to help decide a possible purhase. Thanks for the good job!!!
@joejones6968 2 жыл бұрын
Thank you for putting this video together for all of us to see. Great job, and your speech presentation was top notch!! ( you didn't say: "umm" allot like other idiots do.) Excellent job.
@xxsmashxxpassxx 3 жыл бұрын
bless you for this, the vetroo manual is terrible, and for a new builder was confusing as hell, so i really appreciate this video, thank you for doing it, i subbed
@OuchMyBrainz 2 жыл бұрын
You rock bro thanks
@mr.songoku-10 Жыл бұрын
Great video, a question - can I connect the splitter cable to sys_fan or it has to go thru cpu_fan only?
@EnzoSilva 6 ай бұрын
Great review! Do you think I can use my Antec case's built-in RHG controller instead?
@luisjaviertrybiecc1790 2 жыл бұрын
Hey a question can I connect the rgb cables of the vetro luker v240 can I install them in the controller that is in the back of my case of tuf gt301 has the argb cable controller or it can only be connected with the argb controller that comes with El vetro ?, I would appreciate anyone answering this question.
@breakdown7153 3 жыл бұрын
Since you have experience with both: If you have a Vetroo V5 air cooler, is it worth buying the v240 aio? Tempwise.
@kevincampos3418 3 жыл бұрын
How’s your pump? Do you have it as pwn or dc? Pwn for me turns the pump to 2500-3000rpm Dc to 5000+rpm (has a slight whine when this is on)
@k0m3t1n Жыл бұрын
Great vídeo!! And sorry for the questions I'm new with the liquid cooling system for PC, I have a i5 9400f with a gigabyte h310m-h, I would like to know if the conector You plug into the mother board, is to provide energy to the water pump or is only to control the rgb of the water pump, because the mother board I use, don't have that pump fan conector and My psu don't have it too, thanks
@blackbeansmatter1280 Жыл бұрын
So with the two pin reset jumper i can put reset front panel into that and change colors by reset switch?
@macblink 2 жыл бұрын
20:15 great conclusion!
@ZealousPumpkinTV 2 ай бұрын
Hello there, could you please tell me if you can turn off the RGB on the logo and fans completely for this cooler? is there that option?
@garryconnors8804 3 жыл бұрын
Hoodie! I need that hoodie!
@ElevatedSystems 3 жыл бұрын
amzn.to/3bVLAMx (Paid Link) :D
@ChowHound1337 3 жыл бұрын
How does it compare to the vetroo v5? 5600x build.
@xxsmashxxpassxx 3 жыл бұрын
on the fan pump cable, you plugged it into the 4 pin cpu pump header, how do you know which end to plug it into? on your board you took the first three pins, leaving the 4th pin on the right free standing, wondering how to tell which end to plug into, i have an x570 Tomahawk mobo, same 4 pin pump header as the mobo in this vid. thanks again
@ElevatedSystems 3 жыл бұрын
Line up the tab on the header with the slot on the cable
@xxsmashxxpassxx 3 жыл бұрын
@@ElevatedSystems thanks for this, I really appreciate it, big love from a noob first time builder 🙌❤️🙌
@NewVanguard750 Жыл бұрын
Can it works with MSI Mystic Light?
@cxral6602 Жыл бұрын
You think this will keep a ryzen 7 5800x cool? Also great video, loved the in depth look at the cooler 😁
@JohnBraman413 Жыл бұрын
yes it will
@cxral6602 Жыл бұрын
@@JohnBraman413 yea I got the 360mm one about two mounts ago and it works great. Keeping temps u dee load at 50-60
@JohnBraman413 Жыл бұрын
that's a great budget aoi that works well.
@xxsmashxxpassxx 3 жыл бұрын
sorry for all the questions, but i have two more lol, 1) the fan splitter; i notice the one that comes with the lurker has a 4 pin and a 3 pin, but both of the fan cables are 4 pin... did i get the wrong splitter in my package? seems like it should have two 4 pin males, not one 3 pin, and one 4pin. Also im wondering if i can use my asia horse controller instead of the one that comes with the lurker, sigh
@ElevatedSystems 3 жыл бұрын
The cae is correct correct, only one of the fans needs the 4th pin which is the rpm sensor
@xxsmashxxpassxx 3 жыл бұрын
@@ElevatedSystems ty ty 🙏❤️🙏
@ryanvandenakker6050 2 жыл бұрын
did you use the asia controller? I'm trying to figure out how to get the addressable rgb
@xxsmashxxpassxx 3 жыл бұрын
if you connect the 3 pin controller cable to the 3 pin rgb header (jrainbow) on the mobo, do you still need the sata cable connected to the controller? i assume you would, but im a noob who is clueless.
@ElevatedSystems 3 жыл бұрын
No, the sata power is not needed if you use the mobo rgb header
@xxsmashxxpassxx 3 жыл бұрын
@@ElevatedSystems so if you’re using the mobo 3 pin, do you recommend taping the sata cable that isn’t being used ? Wondering if that’s an issue or not
@ElevatedSystems 3 жыл бұрын
Actually, I think you do need to plug in the sata power to that one if you are using the controller. Sorry I have a lot of AIOs. Does that one not have a cable to plug it directly into the motherboard without the controller so you can just use the MSI software to control the RGB?
@xxsmashxxpassxx 3 жыл бұрын
@@ElevatedSystems the controller has two ends, one has a 3 pin aRGB cable that connects to the cpu jrainbow header, the other cable is the sata cable 👀
@user-ki7zw2fe8n 3 ай бұрын
@@ElevatedSystems so its one or the other?
@sumdood2035 2 жыл бұрын
Not trying to poopoo your review, because I like most of your content, but to say the vetroo fans were "lacking static pressure" while comparing a 33.6 result to a 33.2 result is kind of click-baity. It's well within the margin of error, if you were on either side of an A/C cycle in your building, etc... I'm looking for a 240mm AIO for my new 5600x build and I'd say it would probably work well for me.
@yarian6727 3 жыл бұрын
what if i dont have a 3 pin rgb connector,do i send it back?
@ElevatedSystems 3 жыл бұрын
On your motherboard, or are you missing a part from the AIO?
@ItsGunnaz 2 жыл бұрын
Where’d you get the mounting brackets? The ones given to me do not fit on my tomahawk b450. If I need to buy them separate can you please send me a link unless you have a solution to my issue lol. And I thought I’d let you know that your video was well in-depth in detail. Thank you
@ElevatedSystems 2 жыл бұрын
The AIO comes with multiple brackets including an AMD bracket. Make sure you are using the correct bracket and are installing the hardware correctly.
@fordlohnes9903 2 жыл бұрын
I have the same problem did you find a fix?
@ZenixGaming_ Жыл бұрын
How would this go with a 13600k
@justinv3080 3 жыл бұрын
I wonder if noctua is ever going to do an asetek based aio with noctua fans out of the box.
@ElevatedSystems 3 жыл бұрын
Not sure, but if they do one I hope it's an original design and not an Asetek licensed unit.
@justinv3080 3 жыл бұрын
@@ElevatedSystems yeah that's probably how they would do it, they have too much pride in their products to use Asetek I'd imagine. Loving my nh-d15 chromax
@jordaningram2293 3 жыл бұрын
Now that you've got a good cooler you might be able to benchmark OSRS!
@ale-cd7pl 3 жыл бұрын
What do i do if i don’t have a 3 pin for the rgb
@ElevatedSystems 3 жыл бұрын
Use the included controller.
@ale-cd7pl 3 жыл бұрын
@@ElevatedSystems alright
@moosemastr9079 2 жыл бұрын
can it work with intel 15 4590
@ElevatedSystems 2 жыл бұрын
Ya that's on a LGA 1150 socket correct? It will work with that.
@coolspot18 2 жыл бұрын
The insturctions that come with this cooler are entirely wrong for the AMD install... thanks for the video.
@jesserosas9214 2 ай бұрын
Idk how but I got it to work with my i7-7700k
@zergilli9719 8 ай бұрын
Good video but not enough thermal paste.
@Andrezcar 3 жыл бұрын
Wtf I dont have the original plastic in the processor for amd what now?
@ElevatedSystems 3 жыл бұрын
The AM4 retention bracket? You can find those on Amazon or ebay for under $10
@supermetroid009 9 ай бұрын
Christopher walken!!! That’s who you sound like! God it was bugging me this whole time.
Mike's unboxing, reviews and how to
Рет қаралды 13 М.
Gamers Nexus
Рет қаралды 606 М.
Gamers Nexus
Рет қаралды 2,2 МЛН
KosherTech
Рет қаралды 22 М.
Тима Бичевский
Рет қаралды 1,8 МЛН
Павел Хмурчик
Рет қаралды 904 М.
MaxxPC
Рет қаралды 214 М.