Check-out all the other D-Max content here -> kzfaq.info/sun/PLloptHW8MGGhzVQRkJaMUeCIUh5ZEplfB

Great vid once again. I would recommend putting some sikaflex on the A pillar holes to make sure no water is getting in.

Thanks so much for the video. I installed one on my MUX today. Made the job a lot easier. Used your video instead of the instructions. Well made. Appreciated

Thanks Adam, another great vid. I guess the big benefit of doing this yourself is you know the holes have been carefully treated with paint to prevent further corrosion. I think your video is exceptional, but there is no way I would be doing this one myself.

Gday Adam thanks for another great vehicle I fitted my safari snorkel last weekend with your help, thanks. I will be fitting my outback armour suspension this weekend with the help of your video, cheers Wayne.

Nice video, we always use sika and stainless rivets when we install the bracket to the A pillar, never comes loose or leaks

The A-piller section I would probably use some nut-serts and stainless button head bolts. Then plastic tap in serts are a bit cheap and nasty and they normally dent the piller tapping them in. Otherwise awesome work mate 👌

Nice job Adam, another good video for the collection! Tip: On the hose clamps I use an 8mm socket much easier & can torque a bit better!

Really enjoy these videos. Get yourself a chest mount or head mount so you can use both hands! Keep them coming.

Excellent video thanks. I've got one on the way for my 2019...

Hey mate, is there a reason why you went the v spec over the Armax?

No mention of the diff, gearbox and transfer case breathers? They are the real determinants of wading depth. If they're underwater very bad things can happen. The snorkel can be as tall as you like but until you lift the breather outlets it's a complete waste of time for wading. Still ok for cleaner air tho'

Great video, thanks for your detailed instructions but I’m afraid this job is too big for me to do myself. Keep up the good work!

Wow pretty cool stuff 👌

Great video mate, very informative and easy to follow. Only thing is that I wouldn't want to get that particular snorkel myself, there's so much modification done to the airbox I didn't know about until now. I'll be sticking to going the stainless route, especially since Fabulous Fabrications makes theirs to use the factory airbox intake

Great video. 💪👏🏼

Great video mate 👌

If I seen this 3 weeks ago I would off attempted this my self. I'm handy on tools done suspension, bullbar, lights and winch but cutting holes in body work doesn't sit right with me. I was nervous cutting the air dam for the winch. But this was a good dam perfect installation vid. Keep up the good work man.

Such a good help video! I installed myself ! Thanks. Also any chance to post for Munji 1” body lift kit?! Thanks!

You should do some stickers for you merch “Not crazy tight, just regular tight”, but put a few nuts and bolts in there or people might be offended.

Hey Adam another great video, I’ve watch a few and have done a some of the same things to my D-max. Now might do the snorkel as your video gives me confidence to do it myself. Mate just wanting to know what tyres and size you are running on your stock rim’s. Keep them coming. Regards Adam my name is Adam as well

Good video👍🏼. When I done my pathfinder I taped the whole guard first then marked the tape with the template, then started drilling. Also, I'm assuming that the extra "spacer" that you didn't use is to go where the flare is if you have the LSM that has no flares?

Nice, informative video, except of course an Aussie using American terminology for car parts ('hood' and 'fender' instead of bonnet and guard)! ;-) ;-) Definitely agree about the benefits of a step drill, everyone should have one (or a few) in their tool collection.

I would have put some cold galvanize on those holes and not use the dremel because of the heat. Snips instead.

Great video mate. Just wondering, did you think about sealing the rivets? I've heard that sometimes these aren't water tight. Love this whole series, your ute looks rad.

Great vid as usual and very well explained. I have 1 question though… why do you recommend completely sealing the rubber duckbill drain in the bottom of the air box? Some water can and will get down the snorkel so wouldn’t leaving the factory drain as is working the same?

Hey mate great video, i have a 2018,but its much the same kinda process so keen to give it a go. Did u do a leak test. Heard u cover the ram head with a rag or such and if the engine dies or loses idle speed then the sealing has been correctly done, thus reassuring that it is infact sealed for water ingress.

Hay mate Great videos I've got our xterrain on order and should arrive in a couple more moths but in the meantime does the snorkel create any cabin noise??? Thanks

Why don`t you fit the air intake on top of the snorkel not back to front. It stops taking in water when going thru deep water when you get a bit of a head wave going. Other wise great vid. very helpful.

Tidy job, but i don't think fitting a snorkel raises the wading depth though. After all, the air intake is already far higher than the actual wading depth. You still have to worry about the alternator, ECU and various electrics, as well as diffs.

Hey Adam. Nice video. Question for you, what made you go the V spec snorkel over the Armax? I quite like the v spec, as the armax seems huge….and also you dont need to cut the wheel arch flare with the v spec. Secondly, did you notice any increase in noise with the snorkel fitted? Thanks

Get a k&n or a dry flow filter ?

Hi Adam, do you have the details for the Dremel cutting blade you used? I have a Dremel but not sure which cutting blade to use that will do the job well. Thanks Champ

Do you drill a hole in the bottom of the airbox so any water that goes through the snorkel can drain out?

Snorkels dont provide any benefits re cleaner air as dmax intake is at front grill so unless you're tailgating vehicle in front dust ingress is negligible. As you mentioned ram effect is bs too. Scary drilling into new car.

Hi VSH the link to ebay is for the old model d-max?

Do u install these for people if we pay u ?

hey mate any chance you could tell me what size that stainless pipe is the silicone joins too, definitely keen on a safari snorkle but not so keen on butchering the airbox, want to get one fabricated to suit the safari

Is there a chance to buy airbox mods piece separately ?

On a different note, where did you get the tinted weather shields from?

How does the Dremel go? Seen mixed reviews.

How does the rain water drain out if the drain holes are closed up ?

still wouldn't go deeper than 800mm because you will ruin all the electrical components.