Wow Your ability to read the vinyl tension is amazing. Too damn good. Didn't appreciate this until I tried it myself
@DiegoRamirez-xc7sc3 жыл бұрын
Man 3 years later and still the best Professor out there! You deserve more love man 🙏💯
@jaja18185 жыл бұрын
i have watched so many im starting to think i can start wrapping my car confidently. thanks for the tips man. gonna like all vids for the free tutorial
@wp113020007 жыл бұрын
Love all the videos. Thanks for taking the time and doing them.. I for one definitely like seeing the projects you work on.
@mattgokey5 жыл бұрын
i just bought fenders with these vents, the video tutorial has been so helpful, this is basically the exact fender that i ordered! huge thank you for making such detailed instructions on how to do this particular job.
@adriandiy6737 жыл бұрын
I did not know you located in Florida. I am a big car fan and have a lot of cars lover friends. watch you work all the time
@whistlebirdproductions62494 жыл бұрын
Yo Christian, great work, the material looks like its pretty solid and easy to work with! Gonna order VVIVID right now! Thanks Mate, great content!!
@khalidalhababi79037 жыл бұрын
Will done ... I am from Medal East and i am following your videos. keep it up.
@ryszardochudzki32427 жыл бұрын
Christian THE BEST.......Thanks!!!!!
@mazhussain92177 жыл бұрын
keep up the gud work
@danielkattantorres Жыл бұрын
The god father of vinyl wrap
@stickerfreekz65777 жыл бұрын
another great video!! when can i come do some hands on training with you?
@simonww046 жыл бұрын
Super 👍👍👍👍
@lummy3214 жыл бұрын
CK Wrapz rule
@jaronjohnson98517 жыл бұрын
I love the videos, appreciate what you do, and understand you're recording on a cell, but can you stop covering the microphone?
@adriandiy6737 жыл бұрын
good job
@chrisbernard22616 жыл бұрын
I'm about to attempt to wrap my 350z.. first time wrapper. I've been studying all of your videos and think that they are fantastic. Do you have any tip or tips to any troublesome area on my car? Thanks for all that you do for us do it ourselfers.
@royresendiz36117 жыл бұрын
Thanks!!🤓👍
@neverstoplearning89456 жыл бұрын
Do you have a video of doing a flareside/stepside truck? Like a Ford Lightning
@348frank3485 ай бұрын
"hey what color do you want ?" "...Primer "
@VaracolacidVesci6 жыл бұрын
Amazign videos, congrats. May I ask you a question? I have some vvivid XPo vinyl (im not using it for car tho) but it seems like not strechy at all... it has every single vvivid branding and the texture on the back (i mean seems legit) any recommendation like the temp I should use on the heat gun? i have it almost as low as possible. or another good brand?
@aleckane997 жыл бұрын
Thanks for this video!! I sent you an email about this exact type of fender.
@GRPLiningServices6 жыл бұрын
Skillz.
@scottamolinari2 жыл бұрын
How do you know the vinyl won't lift on that front edge with it cut so close the edge?
@russelld58386 жыл бұрын
I'm going to attempt to wrap my 91 Mr2 Turbo, any tips on inlays on the engine lid?
@iwaktempalo91927 жыл бұрын
sok pakam mamang ko.... bececo benyayap
@DJNuckChorris6 жыл бұрын
How do you not cut into the paint when you are trimming the vinyl with your knife?
@maximetremblay96756 жыл бұрын
Hi, I recently buy vivid vinyl for my G-37 brake calipers and before try it what's the best cutting way for wrap around the brake bleeder? Thank you.
@crispcarguru3036 жыл бұрын
Could you do a video on how to do a precut piece of vinyl or tint, to use as an overlay for over a car reflector?
@justinconley79787 жыл бұрын
How long does it take to remove the front bumper? Do you apply the vinyl to the bumper off the vehicle?
@CFClubAmerica6 жыл бұрын
justin conley some bumpers are done while on the car and some while off the car. Totally depends on the type of bumper it is and the difficulty of it and some just prefer to take the bumper off. Taking off the bumper lasts just a couple minutes, just remove a couple bolts and clips and you’re set.
@svtmotorman6 жыл бұрын
Would you inlay a 2018 mustang hood ? Basically heat extractor style OEM hood.
@xenomorphunk48756 жыл бұрын
@CK Wraps I am about to wrap my 2003 Hyundai Tiburon that i just put a Duraflex Raine Wide Body kit...LOTS of curves. HELP ME!!!
@davidblankenship75994 жыл бұрын
How do you do fog light /driving light inlays
@bobdonal66837 жыл бұрын
Ck please leave what vinyl it is rather its vvivid grey or m3 gloss black plsass
@Lyrics_And_Harmony7 жыл бұрын
where can i purchase smaller pieces vinyl like this without paying an arm and a leg on shipping (Canada/GTA)
@Mech.E6 жыл бұрын
Hi thanks for the video. Can I email you for a question?
@Eazytarget3 жыл бұрын
geeez those are some low pros
@chancepantswindham77455 жыл бұрын
Like watching fucking paint dry
@thomasdean7243 жыл бұрын
This guy is a bad. You need to watch someone who knows what they are doing. The master warp