Hey Nigel, the comments like yours make the channel worth while honestly 👍 I’ve started to earn a couple of quid from doing it but the comments and support and worth more so thank you for always taking the time 🙏

Thanks scorcha appreciate that sir 👍👍

Hey bud thank you really appreciate the comments and kind words 👍 I’m keen to get into the T5 to, there’s plenty out there just a case of waiting till you find the right one.

Hey Chris thank you mate glad you found the channel 👍 appreciate the comment.

Thanks Matt appreciate that 👍 I’m happy with the repair, I see a lot of plates just stuck over the top rusting out in no time and wanted mine to last.

@@YTDTETV Exactly what's happened to me last month when I needed a repair doing. The bloke who did it came recommended too. Just goes to show how people's ideas of a good job differ from each other. I had a bad feeling about it from the start. Should have gone with my gut feeling lol.

@@matttaylor1372 your right some people’s good jobs are alot different to others, I’ve learnt to ask if I’m unsure on what type of job they want straight away that way pricing can be different and most importantly a customer isn’t unhappy when they collect there vehicle.

Hey bud thank you really appreciate that 👍 I’m looking forward to getting stuck into the T5 to.

Hey simon sorry for the delay mate, thank you as always 🙏

Hey bud thank you 👍 only some of them seem to go and most don’t but I guess they are getting a little older now. Yep gota get something to keep the rust at bay after paint so a little bit of zinc and wax in there, oh blimey you ain’t to far away at all 👍👍

Hey trev thank you 👍 glad people enjoy watching them and they have some use.

Thank you mate appreciate that, glad the video is useful 👍

Thank you maté really appreciate that 👍

Hey Dee thanks mate I appreciate the support 👍👍 there’s a few KZfaqrs I watch and I’ve watched there channels back to front a couple times.

Hey Paul thank you really appreciate that 👍 I see alot of patches stuck over the top without any anti rust and they barley last a year.

Hey bud thank you really appreciate that 👍👍

Hey Karl thank you as always mate really appreciate it, 👍 if I had a small plot of land of my own and a few more pennies in the bank I’d keep them all but this one frees up some monies for the T5 and the black golf. I’m keen to get on with the T5 👍👍

Hey mate thank you always appreciate your comments 👍

Hey Scott thank you sir 👍 I do my best to simplify things I’m sure most people can do it.

Hey bud thank you appreciate that 👍

Thanks David appreciate that mate 👍

Hey bud thank you really appreciate your comment 👍

Hey bud thank you I really appreciate that 👍👍, LUCAS was my late sons name unfortunately he passed away a few years ago but that’s another story. My name is Nathan 😊

@@YTDTETV really sorry to hear that Nathan, sorry about the mistake...😔

@@t5jerry hey Jerry no problem at all mate 👍

Good job as always mate

@@james3418 hey James thank you mate appreciate that 👍👍

Hey simon thank you mate appreciate the comment 👍

Thank you Neil always appreciated 👍👍

Thank you grant appreciate that mate 👍👍

Hey bud thank you appreciate that, yes I’ve seen so many welding jobs grow massively when cleaned off I was lucky on this one. The problem with so much stone chip is that when water gets in there it can’t go anywhere except cause more rust.

Hey bud thank you really appreciate that 👍

Hey Martin thank you, it can be tricky trying to recreate stonechip as manufacturers lay it on really nice and thick and getting a similar consistency from a shutz gun. Appreciate the comment 👍👍

Hey Tim thank you mate appreciate that 👍

Thank you mate 👍

Hey bud thank you really appreciate that 👍

Hey Stuart thank you mate 👍 done all the little jobs so hopefully someone has trouble free motoring. Appreciate the comment.

No worries francis thank you as always 👍

Thank you as always Carl appreciate that mate 👍

Thank you mate appreciate that 👍👍

Thajk you John appreciate that 👍

Thanks bud appreciate that 👍

Hey Karter thank you mate 👍 I’ve done loads of sills over the years, this one happily was just a small one.

Thank you Alan really appreciate the feedback about the videos 👍 I’m looking forward to the T5 to.

@@YTDTETV yeah mate would be able to fit a lot more fishing gear in it

@@alanhowarth1898 haha loads more room for fishing gear 😎

When is the next video coming up mate been awhile

@@alanhowarth1898 hey Alan I am slightly behind I do apologise, I have all the bits to progress so I’ll be starting tomorrow 👍

Hey Tim thank you mate appreciate that 👍

Hi Anthony thanks for the comment appreciate that 👍 that’s my Nissan elgrand, very similar but the jap version. If there’s enough want for it I’d do a series on it I love that bus.

Thank you 🙏

Hey bud sorry for the delay I’ve been away, I really appreciate your comment and glad you found the channel 👍👍

@DTE TV don't worry about replies, eventually there's too many. Content on mk5 golf is nowhere to be found, I got a 4motion BKD I'm trying to restore so anything mk5 related is gold dust

@@VW25 thank you I try my best to reply to everyone, you take the time to message me so the least I can do is reply. Ooo a 4 motion one I’ve been thinking about getting one for track days as mine went like stink but just span up on the corners I can image the 4 motion would fly round.

@DTE TV I had disregarded the 4 motion as extra weight, extra drive train bull shite, all the above, but saw a project car with it and all the retrofitted parts I wanted and thought f it.

Thank you mate appreciate that 👍👍

Hey Phillip thank you as always sir 👍 plasma cutters in LIdl, no way I am going tomorrow I’ve always wanted one but normally loads of money.

@@YTDTETV they ain't there no more 🤣 was a few months back. A guy on KZfaq uses one, JW Fab, does some nice work with it. Check him out. 👍

kzfaq.info/get/bejne/fseffsaXr96xnGw.html

Thanks bud 👍

Hey Steven so sorry for the delay, I really appreciate your comment and glad you enjoy the channel. Yes a BKD would go straight in there would just be a case of fitting the engine loom in with it. It’s not something I could take on at the moment but appreciate the offer 👍👍

Hey bud thank you always appreciated 👍, the mrs is super she has everything she asks or needs for and I’m always there at the drop of a hat but.. since the boy had to leave I have to do my own thing and try to be happy and that for me is playing with cars sort of keeps me sane.

@@YTDTETV top man, even though we have never met , i know you are a top guy Keep up what ever keeps you sane All the best 👍

@@sidpf1972 it’s top comments like yours that keep me going so thank you for supporting I much appreciate it 🙏

Hey B-RY thank you mate 👍 yes I’ve seen some awful plates just lashed over the top to. Yes pavo used to be a cake maker, I didn’t believe it at first but yep OL cake baker.

Thank you mate appreciate that 👍

@@YTDTETV still got that problem of climbing adl on my bkd touran

@@mrwhite3094 when was the last time the fuel filter was changed? I wonder if the injector seals are slightly leaking. It will be really black inside the fuel filter if so.

@@YTDTETV cheers mate il have a look 👍 👌

@@YTDTETV hello mate changed my fuel filter and its still ideing high m8

Hey guy, I think it’s the same everywhere as most garages round here don’t do it either, I know it’s not the nicest of jobs but it does pay well.

A lot of garages just want to plug diagnostics machine in and change a sensor or knock out services. They dont actually have the ingenuity to do this sort of thing

Hey Brian I didn’t know that 👍 I will be using that thank you

Hi bud thank you, if you have a machine mart near you they sell a stone chip and the bottle goes on a little gun thing. You can also buy it from eBay, stone chip and the gun comes as a kit 👍

@@YTDTETV thanks for the info

Hi Andy sorry for the delay, appreciate the comment. I used an air blower to get all the loose rust out then I brushed in some kurust 👍

@@YTDTETV Nice tip Thank you😉

Hi bud so I get my paint from a friend of mine, you can get paint made up to your paint code from Halfords 👍

Haha I love that sayin and Derek from VGG is a top guy, oh man the vag cars from this era are so well built a lot better than the newer stuff. Appreciate the comment thank you 👍👍

@@YTDTETV hell yeah bro just dont taste the oil like he dose lol :) looking forward to the engine taredown on next video

@@elloellogamingpeahen i havnt done it yet but I’m curious after seeing him do it so many times 😂. T5 video is next I’m looking forward to getting the engine out to 👍

Thanks Jack 👍

Hey bud they say your Ment to disconnect the battery when welding but I never have and never had a problem

Hey Ben thank you mate appreciate that, also thank you 🙏 was a few years ago now I’m still upright and breathing 👍

Keep doing wot you doing mate love you chanel

@@bentaylor774 thank you Ben 👍

Hi bud thank you 👍 yes it’s an elgrand 😊 3.2d e50. Oh man rust does grow sometimes and yes your right shaping the metal does take some time. My elgrand needs a few patches here and there to, I did look for repair panels but with no luck. I can remember the brand name but yes it had a 360 nozzle, I’ll check brand name tomorrow. Thanks for the comment appreciate that 👍

@@YTDTETV yeh mines a e50 3.2 too same color too. yeh me neither. Supposedly bongo sills are somewhat similar but I didn't wanna risk it and I already bought a big sheet of 1mm steel to make my own patches anyway. I've been recording most of it so plan to make a video one day. Thanks for looking, I was just gonna spray the inside of the sills with motor oil, as I've already got a 360 nozzle I put on a garden pump sprayer. What's the story on the elgrand I ain't seen any videos about it on your channel.

@@ratgreen the 3.2 is the best engine, I’ve seen 2 of the 3.0 ones and they where both broke. I didn’t know that about bongo panels being similar 👍. Ye why not make a video, is good for history of a vehicle and keepsake. I had a Tranist connect and I accidentally spilt loads of oil in the back and I had oil dripping out the sills for weeks after but it never went rusty so it does work 👍. I have mentioned it in one of the early videos but I havnt made a video on it, I will when I weld it up 👍

Hey bud you are so right some stay absolutely mint and some rust. I wonder if some shells where made in a different place or some where made with a different metal.

Hey bud you are Ment to disconnect the battery when welding but I literally never have and never had a problem. Thank you 👍👍

@@YTDTETV Cheers Lad 👍 Looking forward to seeing what went wrong with the transporter engine 😀

@@midnightrider6985 no worries yes me to, a few people have mentioned water pumps. Soon as the engine is sat on the floor I’ll be tearing straight into it 👍

Hi Nathan just was checking to see if any new videos or updates hope all is well ?

@@midnightrider6985 hey bud had a few weeks off but T5 is in the workshop and I’m ready to go. Sorry for the delay thanks for checking in appreciate that 👍

It is well spotted 👍

@@YTDTETV Cheers!

Hi bud I don’t have any spare time at the moment sorry

Hi bud I done both full sills on a mk5 golf 2 years ago and it was £300 a side so £600 in total.

Thank you sir 👍👍

Hey Gary just a basic stone chip from machine mart 👍

Hey bro… one delay after another my end. I like to have all the bits to complete a job/video. Nearly there sorry mate.

@@YTDTETV all good can’t wait for the next one, wasn’t moaning just in high spirits for the next video. Can’t wait 😜

Ah ye 👍👍

Hey Jerry I’m in deal in Kent 👍

@@YTDTETV shame, too far away, never mind mate.

No worries bud 👍👍

Hey bud sorry for the delay, your so right that’s the 2 main spots front wings and rear sills, strange that because the rest of the motors normally stay good.

@@YTDTETV Just replacing the WHOLE sill on a 2007 Jetta. There is a gap at the bottom transition of the sill. Mud collects there and it rots. I've bought a new sill skin, but I'm fabricating the ends myself. Galv primer, then etch primer, epoxy primer then a coat of "Epoxy 121" from RustBuster. That stuff sets diamond hard, but stays flexible. Do all of that and it will NEVER rot again. One more tip, buy some 36% Hydrochloric Acid and paint it on the "clean metal" BEFORE you start work. WEAR A MASK. If it turns yellow, it is killing intergranular rust (rust which is already IN the metal that you can't see). Rinse, dry, repeat until it doesnt turn yellow anymore, then rinse well, dry and paint with "Zinga". Do NOT paint over the Zinga immediately, spray some water on it and leave it for a few days until it turns dary grey, then it is "weathered". I live 20 feet from the sea and EVERYTHING rots, but I've had a piece of steel outside for 5 years which has been treated like this and endured salt spray, rain, hail...NO RUST! PLEASE can you do a vid on how you rolled that edge? I'm scratching my head trying to NOT destroy the panels I buy. Thanks Brother.

Hi there I’m so sorry I’ve been away from the workshop, I’ll check emails in the morning and get straight back to you, thank you 👍

@@YTDTETV Sure No problem! Looking forward to hear from you mate!

Some of them are 👍 some stay really clean.

Hey bud sorry to hear that, I done a grey one and they gone all the way along.