VW Golf Rabbit MKV MK5 | HID Xenon DIY custom Headlight Upgrade installation

Рет қаралды 3,323,974

10 жыл бұрын

Volkswagen MK5 MKV Golf Mini H1 Aharon Bi-xenon HID projector retrofit instruction video. Follow every step how to upgrade your headlights from halogen H7 to a Bi-xenon projector! retrofitlab.com/products/volk...
𝗬𝗼𝘂 𝗰𝗮𝗻 𝗯𝘂𝘆 𝘁𝗵𝗶𝘀 𝗴𝗿𝗲𝗮𝘁 𝘂𝗽𝗴𝗿𝗮𝗱𝗲 𝗸𝗶𝘁 𝗵𝗲𝗿𝗲:
retrofitlab.com/products/volk...
𝗔𝗱𝘃𝗮𝗻𝘁𝗮𝗴𝗲𝘀 𝗼𝗳 𝗮 𝗕𝗶-𝘅𝗲𝗻𝗼𝗻 𝗽𝗿𝗼𝗷𝗲𝗰𝘁𝗼𝗿 𝗿𝗲𝘁𝗿𝗼𝗳𝗶𝘁 𝗸𝗶𝘁:
• Much better light output
• Double high beam (xenon + halogen)
• No glare
• Luxury OEM look
𝗖𝗵𝗲𝗰𝗸 𝗼𝘂𝘁 𝗼𝘂𝗿 𝗻𝗲𝘄 𝗙𝗮𝗰𝗲𝗯𝗼𝗼𝗸 𝗴𝗿𝗼𝘂𝗽:
/ europeanheadlightcommu...
𝗙𝗶𝗻𝗱 𝘂𝘀 𝗼𝗻:
Facebook: / retrofitlab
Messenger: www.m.me/Retrofitlab/
Instagram: / retrofitlab.com_official
Our website: www.retrofitlab.com/
#VW #Golf #MK5 #MKV #Retrofit #headlight #upgrade #HID #xenon #aharon #DIY #lighting #Volkswagen #Rabbit
𝗢𝘂𝗿 𝗦𝘁𝗼𝗿𝘆:
Retrofitting refers to the addition of new technology or features to older systems. These days there are a lot of people who put a simple plug & play xenon kit in their halogen headlight housing in an attempt to improve night vision and looks of their vehicle. In fact they don’t realize that their headlight beams are often worse than before. Night vision achieves relatively little improvement on night vision because of a poor beam pattern, which increases the blinding of other road users. This is because their headlight housings are designed for halogen and not xenon.
A true Bi-Xenon projector update is now possible for your car. Such an upgrade will significantly improve your light output from 700-2100 lumens to 2800 and 3500 lumens, without blinding other traffic with glare from your headlight. Upgrade your headlight OEM style!
The latest high power Led bulbs will upgrade both the exterior and interior lighting system of your car. Led lighting is becoming more and more popular in the automotive market for obvious reasons. They have longer lifetime, use less energy and improve safety with their fast response time.
Do you have any questions? Do not hesitate to contact us, we are happy to help you out!
Good luck with your retrofit!
These products are not ECE-approved and must not be used on public roads in any exterior application. Use on public roads will invalidate both the operating license and insurance coverage.

Пікірлер: 416

@the_color_orange 10 жыл бұрын

Like a boss. Looks like it could have come from the factory that way, and that's the way a retrofit should be done. Great job sir...if my car didn't already have projectors and HIDs, I know where I'd be sending my headlights!

@oliverchristopher4753 3 жыл бұрын

Pünktlich PP am Pünktlich

@Chris-iz7hv 3 жыл бұрын

The level of detail and finesse is mind blowing

@Retrofitlab 3 жыл бұрын

Thanks!

@kenpuro5495 7 жыл бұрын

You do excellent work Retrofitlab. Bi-exon lights look so good! I had Bi-exon lights on my 08 r32 gti. Nice video!

@bogdanzapasnoy6177 3 жыл бұрын

So you have R32 or GTi ? )))

@jinsters 8 жыл бұрын

You may want to heatshrink, electrical tape, or something about the connector you attached at the end of the video.

@chockes1 8 жыл бұрын

This is great!!! thanks so much for this great video !!!

@tarabien 8 жыл бұрын

Hi, I love your work, very big effort. can you please tell me where to get the black seal to glue the cover lens and the back of the light together. cheers

@amirr7284 10 жыл бұрын

what is the tool called for cutting the headlight lenses and where can i get it from? looks abit like a windscreen cutter

@datacharge 9 жыл бұрын

Excellent clean professional install, I would love to do this where do I click buy! One feedback however I couldn't follow the electrical part since I only saw two black wires get cut. Where did they come from perhaps the original harness ? Also I'm guessing the ballast is attached on the car as well and has the proper plugs to just connect to the light but it could have been shown along with any canbus cancellers etc. Lastly a picture of the cut off etc on the wall after install would be great. Thanks!

@tdyzzle18 7 жыл бұрын

What did you use to reseal the headlights? Or what would you recommend using?

@Luis-bb9dg 7 жыл бұрын

que tamaño y que modelo recomiendas para instalar en un clio 2 sport ? gracias !

@alireza071 8 жыл бұрын

sir how does it work as h1 biexnon has high and low beam ! so if i change to high beam 2 light come on together original high beam and biexnon high beam?

@bohriss 7 жыл бұрын

could you show us your Owen where you heat the Lights? how to build one?

@stancuadrian5893 10 жыл бұрын

Awsome, I will modify mine today, but where do I get that tool of yours from the beginning of the video? The one for cutting the inside silicon of the heaight?

@lsvtech21 9 жыл бұрын

Hi also wanna know if I can retrofit a freightliner Columbia headlights. Cuz I have HDI on but the housing is not that bright. Thank you sir and good video

@rajsing4518 7 жыл бұрын

What is the spray you used to clean/wipe the reflector?

@858Chris 6 жыл бұрын

When you baked the assembly in the box with the heat gun, how long did you do it for?

@darijansimunovic4038 8 жыл бұрын

Nice work! What xenon hid kit to use with your projectors for VW Golf VI? I would buy them (projectors), but I heard that Golf VI, when installed xenon hid kit, have issues with electronics. Anyone have some advice and experience? 35w, 55w, can bus or not??? Thanks in advance...

@brunomedeiros612 5 жыл бұрын

Seus vídeos e projetos são tops de mais.. Quero muito começar a trabalhar com isso, fiz o projeto de retrofit no meu golf mk4 ficou 95% só não ficou 100% pela questão de equipamentos.

@Retrofitlab 5 жыл бұрын

Obrigado pelos elogios! O Golf 4 tem faróis difíceis de adaptar.

@mokraneabdous5470 6 жыл бұрын

Bon travail merci pour le partage .

@half_r_mk5 4 жыл бұрын

Amazing video. Gotta have balls to be able to pry that headlight housing without breaking it.

@Retrofitlab 4 жыл бұрын

Thanks, just a matter of trying, practicing and patience :-)

@elvismendes1075 8 жыл бұрын

I have dout about working with headlights types of glue for sealing and tools

@R5GTT 8 жыл бұрын

This is amazing 😃

@rapkin1986 10 жыл бұрын

What about the light bulb out warning light in the mk5. Do I need to disable that? This will be my next mod...thanks

@Tibuxk 9 жыл бұрын

What type of xenon should i use for the Bi-Xenon you're using in this video? H7 or H1? If it is H1, should i make any changes?

@christianbruns6460 8 жыл бұрын

Hi, is it possible to open the headlights from an BMW E39 built at 2001, the same way?

@tochtly64 8 жыл бұрын

Looks great, can you send me a link to get this kit? I think that is the same that works with Golf MK6, right?

@UND3ADSK8R 6 жыл бұрын

Looks clean very nice work. Bought myself Aftermarket headlights from SpecDtuning maybe I can do this with the old pair and sell them

@illusionfx 10 жыл бұрын

How did you align the projector headlight?

@realkiller3351 7 жыл бұрын

Hi @retrofitlab I just wanna know what silicon do you use ti put the glas back on and where can I buy it :).

@TheCreationman 5 жыл бұрын

Real Killer butyl rubber. The retrofitsource or Winnipeghid.ca (if you live in Canada) sells it

@ErikOrtegaRehabilitadororal 9 жыл бұрын

Hi, i have mk5 gti with already bi xenon projector stock can i open it as easy just for painting complete background black ?

@user-dn6qy1ou1f 4 жыл бұрын

Yes

@emmvan 9 жыл бұрын

What spray did you use to clean finger prints of the chrome?

@yonatanrodriguez3263 6 жыл бұрын

Where you guys located, I will like to paint the inside of my headlights of my ford explore 2013”

@dilmar4033 5 жыл бұрын

I have a Mitsubishi Pajero Full and headlight lenses are old...I tried to clean and the result is not enough. There is possibility to change only lenses or retrofit it?

@TheBasebiker 10 жыл бұрын

whats the name of the double face tape that you use for put it in together again?

@lsvtech21 9 жыл бұрын

Hi can you do a retrofit on a 2010 Nissan sentra with fog lights thanks awesome video

@luizgustavofelipe 7 жыл бұрын

Boa tarde, onde acho vcs, quanto fica fazer fiat punto?

@-EvoII- 10 жыл бұрын

Nice job Wouter.

@sampathkumar4132 7 жыл бұрын

How easy or difficult is it to open the plastic lens on MK% jetta?

@Neco8582 10 жыл бұрын

Awesome!

@fphfphfphfphfph 10 жыл бұрын

greetings from mexico thanks to your videos i did this retrofit a few months ago now do another one, stove will be fine, wont it.

@renatomachado80 7 жыл бұрын

Hello, excellent video. I am from Brazil and I have a jetta mk5 and I will do the installation of the projector, but I have some doubts. After applying the glue, for how long and at what temperature should the piece remain inside the box? Before you start to open the lens, do you leave the piece warming up inside the box? If so for how long and at what temperature. thanks.

@rachidalarm5543 7 жыл бұрын

Renato Machado t0

@grupoanjpa 7 жыл бұрын

Ficou excelente o trabalho no carro do Renato Machado...curtir....agora a duvida que eu tenho Retrofitlab é: Qual o chicote que no video voce conectou ele para dar luz alta junto com o projetor? Tem link de onde posso achar?

@grupoanjpa 7 жыл бұрын

The whip that connects the high light to the projector

@Florin1up 9 жыл бұрын

Can't belive that you removed the front glass so easy. HELLA headlights are imposible to dissasembly. I tried with heat guns, solvents, etc.. What brand was yours?

@netzahcastaneda5938 7 жыл бұрын

hi, these are the headlights adapted can put a gli mk5? remove original headlights

@ricardocj9476 4 жыл бұрын

Excelente trabalho!!!!! Muito profissional....

@Retrofitlab 4 жыл бұрын

Muito obrigado :-)

@BoogyAS 7 жыл бұрын

At 03:45 when you cut the wire. How do you know which of the wire is negative(-) and positive(+), or it doesn't matter how you connect them to the xenon bulb ? How can i find out which is negative and positive? Thank you!

@Keijotti 2 жыл бұрын

test

@sat4900 9 жыл бұрын

the 6.0 is the inches of the projector???what is that black staff you put on the end to close the headlight

@u2loucas571 8 жыл бұрын

thanks for help....and making this video.. ;-)

@Pghsfinest222 10 жыл бұрын

Can I do it this way with any headlight?

@pelucheux974 8 жыл бұрын

what is the strip black for waterproof at 6:13 ? want to mod my headlight but affraid if water inside after .... sorry for my english

@SuperMalissimo 8 жыл бұрын

Very, very professional!.... Congrats !!

@jomor147 6 жыл бұрын

Putting non-insulated positive & negative terminals together in the housing is a reason for short circuit almost on purpose. That's not professional at all.

@tugaysezgin6075 10 жыл бұрын

have a nice day. I've been watching you from Turkey. Are you doing a professional job. If you answer a couple of questions I'd appreciate it :) first will be the 2011 model VW Polo 6R BiXenon'm planning to do my car. How do I remove the headlight glass? How you use something yellow knife? and if you could remove the b-type silicon, which should I use? Thank you in advance :)

@dmitriyuglov2650 4 жыл бұрын

Good day! Please tell me, how far should the headlight be from the mark on the wall? Thank you in advance!

@Retrofitlab 4 жыл бұрын

Just not too close so you have a nice wide pattern so you can align the new pattern.

@alucard170 9 жыл бұрын

On the 7:45 you put the light on the box how long it stays inside ?

@barstarzz9728 7 жыл бұрын

Do you have this parts for Golf 6 (mk6 - 2011) ??

@ozcanocak1966 5 жыл бұрын

For good lighting, you recommend the brand projector which is 2.5 ".

@Retrofitlab 5 жыл бұрын

These are the projectors used, Aharon Mini H1: www.retrofitlab.com/bi-xenon-mini-h1-twin-kit.html

@ramiemam3249 4 жыл бұрын

Awesome ❤️❤️ And we need to see also the rear taillights for jetta mk5 plz

@Retrofitlab 4 жыл бұрын

Thanks, and sorry we don't have plans for the taillights for the Jetta MK5 lights

@marcopiazza3625 4 жыл бұрын

@@Retrofitlab Sorry I wanted to know what the yellow tool is, and what it's called so I can buy it too. Thank you

@derekwilliams1155 4 жыл бұрын

I know a guy who has taken his apart for his GTI, should be the same. He said once you have them off to get a strong knife and work it into the seam between the lens and housing, pry the knife away from the lens (pull the handle towards the housing). You'll hear cracking but that's just it separating, if you pry the wrong way it will crack the lens.

@engin-oto 10 жыл бұрын

when opening the lens you use the name of the apparatus is the price thanks

@ittamodotta 8 жыл бұрын

Hi! I loved your knife. Wkat´s brand do you use?

@mujjuman 7 жыл бұрын

Man I was hoping I wouldn't need to cut or drill anything with the mini h1. But great video!! Thank you

@diutsfuller446 7 жыл бұрын

lettermen

@Strelasundangler 10 жыл бұрын

Would it be possible to make another video? How to get the plugs & cables connected in the right way? (H7 and H4)

@KawasakiZ-yd5fq 10 жыл бұрын

... good idea....

@thejoseandresshow 8 жыл бұрын

Diameter of the hole drilled on the headlight rear cap?

@trevorvukosisambo3839 Жыл бұрын

Could you please do Opel Corsa C 03 up (Gamma) headlights

@jorgefavioreyespache 8 жыл бұрын

hola como se llama el pegamento que utilizas para sellar el faro

@mrdokabbas 8 жыл бұрын

can u open lens for jeep grand cherokee 2015 ple

@ledstyle1624 4 жыл бұрын

It’s so cool!

@Retrofitlab 4 жыл бұрын

Thank you very much :)

@victordecarvalho3718 Жыл бұрын

Ótimo serviço, teria o link dos projetores que vc usou nesse farol? Queria fazer no meu jetta

@Retrofitlab Жыл бұрын

Oi, Por favor, veja este link para o projetor: retrofitlab.com/products/mini-h1-twin-kit-bi-xenon-projector-kit?_pos=1&_sid=9c95b4854&_ss=r Também temos este kit específico para o Jetta 2005-2011: retrofitlab.com/collections/volkswagen-jetta-v E este kit específico para o Jetta 1999-2005: retrofitlab.com/collections/volkswagen-bora-jetta-iv Para mais informações, envie um email para info@retrofitlab.com

@alireza071 8 жыл бұрын

can i use h7 hid bulb in this please

@mrdokabbas 7 жыл бұрын

this is cold gel ?

@spotrick98 8 жыл бұрын

the headlights will be homologated for the road?

@Labsy 9 жыл бұрын

Hi Retrofitters, the final results shown in last few seconds did not convince me. There's a lot of dust visible in light beam. Is this due to badly done job, or are lens guilty or something else?

@tbkbaker00 8 жыл бұрын

Do you know if these can be used in other vehicles assemblies? I have a semi truck i would love to be able to run leds as my low beams, but i only have reflective housing

@tbkbaker00 8 жыл бұрын

Do you do these on order, or know a states side(U. S) facility that does these modifications?

@Pogo-A-Gogo 8 жыл бұрын

So how does the car's headlight power fit into the xenon ballast as I see they are different connections? Many thanks Retrofitlab!

@Pogo-A-Gogo 8 жыл бұрын

+Retrofitlab Thank you so much!!!!!. I've been stumped for days. thought I was going to have to buy a relay harness.

@antoninovela526 7 жыл бұрын

segreto

@sufm96 9 жыл бұрын

What bulbs are used for the sidelights

@krissysxi4808 9 жыл бұрын

could you be so kind as to tell me what tool you use to break the bead in this video. thanks

@krissysxi4808 9 жыл бұрын

+Retrofitlab the yellow tool buddy

@176988 9 жыл бұрын

What type of tool is that to split the sealant

@MrVorgbeef 8 жыл бұрын

Hi there. Great job, very interested to know if these are road legal in the UK. THanks

@MrVorgbeef 8 жыл бұрын

I have just looked at your website and found the shroud section. GTI are probably best as you say for a golf mk5. If you could explain position light & recommend the correct wire harness for my car. Thanks again

@dowcwow 2 жыл бұрын

Do you need a relay harness for these to work properly?

@Retrofitlab 2 жыл бұрын

Not needed :-)

@2CREATthief 7 жыл бұрын

100% top quality murcks

@lukshunter 10 жыл бұрын

very nice TOP!

@Chivero93 9 жыл бұрын

Can I send you my headlights from Wisconsin? And how much would the price be?

@EAga-gq3ed 8 жыл бұрын

you are excelent tech.

@lipegames319 6 жыл бұрын

Faz um vídeo colocando em um Citroën VTR

@killatore96 8 жыл бұрын

wooow complimenti!

@ThePalami 9 жыл бұрын

what level heat gun gets when placing the headlight in the box

@MrADAMOSD 9 жыл бұрын

which applies a thick adhesive butyl 2,5,3mm?

@SrJabardo 7 жыл бұрын

I know this was done a while, but only just found this video. What is the diameter of the projector lense? 2.5' or 3.0' ? Thanks

@SrJabardo 7 жыл бұрын

Thanks I've found a kit on ebay, Red, they I am going to fit on Sharan old headlights. See if I can do it ;)

@ionurboz 6 жыл бұрын

After the work, Do you use halogen lamb in the projector?

@ionurboz 6 жыл бұрын

Halogen makes sense less light... but is not auto height adjustment with xenon :)

@mauriciow1460 8 жыл бұрын

very capricious congratulations.

@MarcoSmarty 9 жыл бұрын

Awesome !!! what have you done with the new polo 2013 ?

@MarcoSmarty 9 жыл бұрын

Beautiful men, I'll try, thank you so much !!!

@cbr-entreprise9089 6 жыл бұрын

hello, is avaible for renault mégane 2???

@mcclivant 10 жыл бұрын

Awesome! now,could you please do a retrofit for a 2006 mazda 6?

@mcclivant 10 жыл бұрын

***** I was asking if you could do a retrofit video for 2006 mazda 6 since I bought a retro-quick system because I still haven't installed it. I think I need more instructions as im a total noob :)

@emcikemo55 10 жыл бұрын

Where do you buy or get your projectors???

@ionutgalan3631 7 жыл бұрын

For Passat b5.5 when to do?

@ledmk2 9 жыл бұрын

Very nice

@ragz4anne 9 жыл бұрын

Hello sir. Nice work there. You should consider selling just the kit with glue to put it back on so who ever wants to do the work can just do them self and save money. Thanks.